Product

Categories

Gloss measuring equipment

Showing 1–6 of 7 results

Surface check gloss meter PCE-IGM 100-ICA includes ISO certification

Model: PCE-IGM 100

The PCE-IGM 100-ICA Surface Check Gloss Meter is a test device for determining surface gloss. Thus, with a gloss meter, the spectral reflections of the light beam striking the surface to be measured are recorded and analyzed. The measuring device's touch screen allows for easy navigation.
  • Geometry: 20° / 60° / 85°
  • Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
  • Standard: ISO 2813 / GB / T 9754 / ASTM D 523/ ASTM D 2457
  • Light source: D65
  • Wavelength: 400-700 nm
  • Includes ISO Calibration Certificate.

Paint gloss tester PCE-PGM 100-ICA includes ISO certification

Model: PCE-PGM 100

The PCE-PGM 100-ICA Paint Gloss Tester is a gloss tester that works with 20°, 60° and 85° geometry measurements, using the reflectance principle. This means that the gloss meter emits light that hits the surface to be tested, part of the light will be absorbed by the surface and another part will be reflected from the instrument to analyze and give results. Absolutely reliable.
  • Measurement Geometry: 20° / 60° / 85°
  • Standard: ISO 2813 / GB / T 9754 / ASTM D 523/ ASTM D 2457
  • Range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
  • Includes ISO Calibration Certificate.

PCE-GM 100-ICA gloss meter including ISO certification

Model: PCE-GM 100

The PCE-GM 100-ICA gloss meter is used to measure gloss on flat surfaces and works on the principle of a reflectometer. The compact design and ergonomic dimensions of the PCE-GM 100-ICA gloss meter make it useful for on-site measurements or during production plant operations. All test instruments are supplied with calibration and can be ISO certified as an option.
  • Measuring angles 20º, 60º and 85º
  • Measuring range: 0.0 to 200 gloss units
  • Standard: ISO 2813, GB 9754-88, GB 9966.5
  • Includes ISO Calibration Certificate.

Paper and textiles gloss meter PCE-GM 55-ICA includes ISO certification

Model: PCE-GM 55

Paper and Textiles Gloss Gauge - The PCE-GM 55 Gloss Gauge is a 3-angle luminance instrument. The measuring angles of the gloss meter are 20°, 45° and 75°. This allows the gloss meter to be used for gloss measurement in the high gloss and medium gloss ranges. Special measuring angle of 75° enables gloss level measurement on paper and textiles.
  • Range: 0 ... 200 0 ... 200 gloss units / highlights
  • Accuracy: ± 1 gloss units
  • Repeatability: ± 0.5 gloss units
  • Optical Angle: 20°, 45°, 75°
  • Measurement for medium and high gloss
  • Gloss measurement on fabric and paper can
  • Includes ISO Calibration Certificate.

Gloss meter PCE-GM 80-ICA includes ISO certificate

Model: PCE-GM 80

Gloss meter PCE-GM 80-ICA - Gloss meter equipped with an external gloss sensor. The gloss meter's very small sensor measuring surface Ø 4.5 mm contributes significantly to the ability to perform measurements on small hard-to-reach surfaces, giving this instrument versatility.
  • Measuring geometry: 60°
  • Measuring range up to 1000 GU
  • Measuring surface: 4.5 mm
  • Data storage: 1245 measured values
  • Interface: Micro USB
  • Includes ISO Calibration Certificate.

Gloss and opacity meter PCE-RM 100

Model: PCE-RM 100

The PCE-RM 100 gloss and opacity meter is used to measure the reflectivity properties of surfaces in relation to opacity. The PCE-RM 100 gloss meter is used in stained glass, film quality, paper opacity, shine and hidden strength of various paints, inks and coatings - this gauge delivers efficiency and extremely reliable accuracy.
  • Measuring range: 0 ... 100 (0 is transparent and 100 is fully opaque)
  • Optical measuring angle: 45 degree angle
  • Measurement accuracy: ±1
  • Resolution: 0.1
  • Battery Operation
  • Interface and software.