Headphone production testing machine AEC210

Price: Liên hệ

Model AEC210
Manufacturer Larson Davis
Power supply
Weight
Size
Condition Còn hàng
Warranty 12 tháng

May-kiem-tra-san-xuat-tai-nghe-AEC210 LarsonDavis

I. Specification of headphone production testing machine AEC210

  • The AEC210 Headphone Production Prototype is a cost-effective solution for checking production line volume of headphones.
  • The flush-mount microphone and the flexibility to add additional speakers and microphones make it possible to test both noise-cancelling headphones and headsets with microphones. Two fully adjustable headphone positioners allow for precisely controlled placement and consistent, repeatable testing.
  • A modular mounting system allows additional microphones and speakers to be positioned in the same location at all times for increased testing consistency and quality system compliance.
  • The Headset Manufacturing Tester is a great alternative to expensive head and body simulators or devices that use IEC 60318-4 compliant couplers.
  • An optional loudspeaker, Model AEC210-SPK, can be added to the Headphone Production Tester to test noise cancellation and used as an artificial mouth to test the built-in headset microphone.
  • For measuring noise outside of headphones with microphones placed in critical measurement locations, a fully adjustable microphone stand is optional. Modular design allows for a multitude of installation configurations of additional speakers and microphones.
Headphone production testing machine AEC210

II. Application

  • Check the headphones
  • Production line inspection
  • Testing noise canceling headphones
  • Check the headset microphone.

III. Specifications of AEC210 headphone production testing machine

SPECIFICATIONS

Mechanical

US SI
Dimensions (h x w x d) 12.2 x 8.1 x 7.1 in

31.1 x 20.6 x 18.0 cm

Weight

3 lbs 1.4 kg
Width between ears 9.65 in

145 mm

Height of headband holder

5.08 in 129 mm
Headband holder height adjustment ± .47 in

± 12 mm

Ear plate angle

4.5°
Diameter of ear plate 5.31 in

135 mm

Measurement repeatability (typical)

<1 dB Standard Deviation
Operating temperature +14 °F to +122 °F

-10 °C to +50 °C

Microphone positioning

Flush with ear plate
Headband holder height adjustment ± .47 in

± 12 mm

Operating humidity

0% to 90% RH, non-condensing
Standards

CE, RoHS

Included microphones (Model 130A25)

Sensitivity

45 mV/Pa

Frequency response (±2 dB)

20 to 10000 Hz
Frequency response (±3 dB)

10 to 16000 Hz

Frequency response (±4 dB)

10 to 20000 Hz
Maximum sound pressure (3%

>122 dB re 20 µPa

distortion limit)

Excitation voltage

18 to 30 V DC

Constant current excitation

2 to 20 mA
Output bias

9 to 14 V DC

TEDS compliant

Yes

MODEL AEC210-SPK SPEAKER SPECIFICATIONS

Frequency response

150 Hz to 20 kHz
Speaker Sensitivity (SPL)

86 dB (2.83 V rms input)

Maximum power

10 Watts @ 25% duty cycle
Input impedance

8 Ohms

Electrical connector

Screw terminal
Adjustable height range 5.04 in

128 mm

Speaker dimensions (h x w x d)

3.1 x 3.1 x 3.3 in 78 x 78 x 85 mm
MICROPHONE HOLDER AEC210-1/2MS

AEC210-1/4MS

Supported microphone diameter

½ in (12.7 mm) ¼ in (6.35 mm)
Height adjustment 5.90 in

150 mm

  ***Other GMGA Headphone Production Testers: https://gmga.vn/en/danh-muc/testing-equipment/headphone-testing-equipment/

Review Headphone production testing machine AEC210

5 0% | 0 review
4 0% | 0 review
3 0% | 0 review
2 0% | 0 review
1 0% | 0 review
Review Headphone production testing machine AEC210
Choose a image
0 character ( Minimum of 10)
    +

    There are no reviews yet.

    No comments yet

    SIGN UP FOR A CONSULTATION

    Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.

      COMMIT

      100% new product

      COMMIT

      100% refund if the product is of bad quality and not as promised

      24/7 SUPPORT

      Hotline: 0845 969 336

      DELIVERY

      Nationwide