PCE-DFG NF 50K force gauge including ISO certification

Price: Liên hệ

Model PCE-DFG NF 50K
Manufacturer PCE
Power supply
Weight
Size
Condition Còn hàng
Warranty 12 tháng

I. Specification of PCE-DFG NF 50K force gauge

Force meter PCE-DFG NF 50K / With external load probe accessory / USB interface and PC software.

PCE-DFG NF 50K force gauge including ISO certification
  • The PCE-DFG NF 50K force gauge with an external load cell is designed to measure compressive forces at hard-to-reach measuring points. The load cells are connected to the dynamometer by means of a sensing cable up to 3 m in length, and with its small size it guarantees flexible measurements and applications. Gauge load cells have several threaded holes on the underside, allowing for permanent installation during force test measurement.
  • The dynamometer can operate at sampling rates up to 1600 Hz. The sampled measured values ​​are displayed as instantaneous values, as well as in the graphs that are tracked directly in the dynamometer.
  • Measurements can be stored in the internal memory or transmitted via the USB interface with the included software up to 800 Hz as live measurements.
  • The PEAK Hold function allows the highest measured value in the dynamometer to be frozen until this value is exceeded or cleared.
  • This digital force gauge offers the option of storing two limit values, which are continuously compared with the instantaneous value. When these limits are exceeded or dropped a signal is displayed in the dynamometer display, as well as feedback via external interfaces, e.g. this can be used to control the tester tra.

PCE-DFG NF 50K force gauge including ISO certification PCE-DFG NF 50K force gauge including ISO certification

***View more GMGA force gauges at: https://gmga.vn/en/danh-muc/measuring-device/force-measuring-equipment/

II. Specifications PCE-DFG NF 50K dynamometer

Measuring range

0 ... 50 kN / 50.000 N / 5.000 kg / 11.240 lbs
Resolution

5 N / 1,1 lbs

Accuracy

± 0.5% of the measuring range
Measurement units

N, kg, lb, kPa

Display

2.8" TFT graphic display
Alarm Modes

Inside, Outside, Crack, Shutdown

Sampling rate

6 ... 1600 Hz
Storage

100 measurements

Power supply

NiMH battery, 6V / 1600-mAh
Battery life

About 10 hours

Power adapter / charging adapter      

12V / 1A
Outputs

Interface: USB switching output: 12V / 50-mA

Protection class

IP 54
Operating and storage conditions   

-10 ... 50°C / -14 ... 122°F

5 ... 95% rh non-condensing

Dimensions load cell

Ø 32 mm / H 16 mm / M5 thread

(see technical drawing)

Cable length load cell

About 3 m / 9.8 ft
Dimensions

200 x 97 x 42 mm / 7.9 x 3.8 x 1.7 in

Weight

600 g / 1.3 lbs

  ***Video of digital force gauges available at: Gmga Measuring Youtube.

Review PCE-DFG NF 50K force gauge including ISO certification

5 0% | 0 review
4 0% | 0 review
3 0% | 0 review
2 0% | 0 review
1 0% | 0 review
Review PCE-DFG NF 50K force gauge including ISO certification
Choose a image
0 character ( Minimum of 10)
    +

    There are no reviews yet.

    No comments yet

    SIGN UP FOR A CONSULTATION

    Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.

      COMMIT

      100% new product

      COMMIT

      100% refund if the product is of bad quality and not as promised

      24/7 SUPPORT

      Hotline: 0845 969 336

      DELIVERY

      Nationwide