Coating thickness gauge NOVOTEST TP-2020

Buyer Rates Mã sản phẩm: 16827

Model: TP-2020
Manufacturer: NOVOTEST
Status: Stocking
Guarantee: 12 months
Price: Contact

The NOVOTEST TP-2020 Coating Thickness Gauge is designed for precise coating thickness measurement on ferrous and non-ferrous metals.

Various sensors enable the NOVOTEST TP-2020 thickness gauge to non-destructively test protective coatings with a wide range of thicknesses.

Description

The NOVOTEST TP-2020 coating thickness gauge can also measure parameters: groove depth and corrosion, surface roughness as well as control temperature, ambient humidity and dew point temperature, . . . a variety of tasks performed on a universal thickness gauge.

I. Specification of NOVOTEST TP-2020 non-destructive coating thickness gauge

NOVOTEST TP-2020 – Measure coating thickness:

  • To suit specific test and measurement requirements depending on the thickness, substrate and coating to be measured, the NOVOTEST TP-2020 Coating Thickness Gauge has a variety of probes.
  • The NOVOTEST TP-2020 coating thickness gauge has a wide range of coatings to measure (from 0 to 60 mm), so it can measure protective film coatings, body paint thicknesses to finish coatings. metal structures, bridges, oil and gas pipelines and other objects with bitumen coating.

Coating thickness gauge NOVOTEST TP-2020 Coating thickness gauge NOVOTEST TP-2020

NOVOTEST TP-2020 – The mode of operation makes it possible to quickly measure and test with high accuracy of protective coatings:

  • Real-time measurement – The NOVOTEST TP-2020 meter displays the value of the current measurement or the average value over a series of measurements.
  • Control – NOVOTEST TP-2020 is used where it is necessary to control coatings whose thickness needs to be clearly defined. During the measurement, the NOVOTEST TP-2020 coating thinness meter displays the difference in the thickness of the measured coating and the reference coating, analyzing it to draw conclusions about the coating quality.
  • Statistics – NOVOTEST TP-2020 tracks the parameters of a wide range of measurements: maximum and minimum values, deviation, mean, number of measurements.
  • Automatic averaging mode – after each measurement, the NOVOTEST TP-2020 instrument automatically calculates and displays the result in a set of averages.

Coating thickness gauge NOVOTEST TP-2020

NOVOTEST TP-2020 – Measurement range:

  • NOVOTEST TP-2020 measures electroplating and painting layers on steel substrates. Suitable sensor F-0.5. Coating thickness measurement range from 0 to 500 microns.
  • NOVOTEST TP-2020 measures coatings of paints, varnishes, polymers (and any other dielectric) on steel substrates thicker than 0.5 mm. Using the F-2 and F-5 sensors, provide a control range of up to 2/5 mm respectively.
  • NOVOTEST TP-2020 measures ferrous coatings – the NF-2 sensor is used at measurements from 0 to 2 mm (2000 μm).
  • NOVOTEST TP-2020 measures very thick coatings in metals (ferrous and ferrous). M12, M30 and M60 sensors are used, which can measure up to 12, 30 and 60 mm respectively.
  • NOVOTEST TP-2020 roughness measurement – DSh sensor is used to measure roughness, depth of corrosion and defects, groove surface.
  • NOVOTEST TP-2020 measures temperature, humidity and dew point – DTVR converter
  • Furthermore, this coating thickness gauge can measure anodic and zinc protective coatings, modify metal oxide and copper films, used in the automotive industry, manufacturing and construction of metal structures..

novotest-tp-2020 novotest-tp-2020 Coating thickness gauge NOVOTEST TP-2020

NOVOTEST TP-2020 – Improved quality:

  • Higher measurement speed and availability for many other ultrasonic test and measurement applications
  • Audio and visual indicator
  • Built-in memory in thickness gauge, can save test results and transfer them to PC
  • Improve measurement accuracy and stability
  • Suggest new display measurements, thus increasing measurement convenience.

Full calibration of the thickness gauge with a conditional unlimited number of points (up to 100 points) for calibration, this non-destructive thickness gauge can be set up by deterministic reference for results the most exactly. Therefore, there is practically no limitation on product shape and material base. You can calibrate it independently in minutes instead of sending the thickness gauge to the factory like before.

Coating thickness gauge NOVOTEST TP-2020

NOVOTEST TP-2020 – Ergonomic design:

  • This coating meter is ergonomically shaped with convenient interface buttons that can be used with gloves (during manufacturing); or at low temperature; and the shockproof cover in the protective silicone case will protect from high impact.
  • Wide operating temperature range from -20 to +40°C makes it possible to use it in extreme conditions.

novotest-tp-2020

Advantages:

  • Measurement of coating thickness on ferrous (Fe) and non-ferrous (nFe) metals
  • Automatic sensor detection
  • Wide range of sensors for different measuring and testing tasks
  • Select unit of measurement
  • Store individual calibrations in probe memory
  • Average calculation, min and max indicator
  • Measure with high accuracy
  • Transfer measurement data to PC via USB
  • Portability
  • Big buttons
  • Magnified screen
  • Shockproof case with special protective silicone bumper cover.

***You may be interested in the GMGA Ultrasonic Thickness Gauge: https://gmga.vn/en/danh-muc/measuring-device/thickness-measuring-equipment/ultrasonic-material-thickness-gauge/

II. Specifications of coating thickness gauge NOVOTEST TP-2020

Thickness measurement range(depends on probe type)

0 µm … 60 mm
Measured parameter

coating thickness, corrosion depth, roughness, temperature, humidity, dew point temperature

Measuring units

μm, mm, inch, mil
Revision modes

calculation of average, indication of minimum and maximum

PC connection

yes
Menu languages

English, Espanol, French, Russian

Dimensions, mm

122x60x25
Operating temperature range, ° C

-20 … +40 ° C

Batteries

2 AA
Type of connectors of probes

Lemo

Storage of measurement results and PC software (optional)

256
Standards

AS 2331.1.4, AS 3894.3-B, AS/NZS 1580.108.1, ASTM B 499, ASTM D 7091, ASTM E 376, ASTM G 12, BS 5599, EN 13523-1, IMO MSC.215(82), IMO MSC.244 (83), ISO 1461, ISO 19840, ISO 2063, ISO 2178, ISO 2360, ISO 2808-7C, ISO 2808-7D, ISO 2808-12, NF T30-124, SSPC PA 2, US Navy PPI 63101-000, US Navy NSI 009-32,  ASTM D 1186-B, ASTM D 1400, BS 3900-C5-6B, BS 3900-C5-6A, BS 5411-11, BS 5411-3, DIN 50981, DIN 50984, ECCA T1, ISO 2808-6A, ISO 2808-6B, SS 184159

Time of continuous work hours, not less

20
Weight of electronic unit with batteries, no more, kg

0.2

Specifications of probes for Coating Thickness Gauge NOVOTEST TP-2020:

Coatings on steel (dielectric and conductive coatings on ferromagnetic metals and alloys)

Type of probe Coating thickness measurement range Measurement accuracy Dimensions of the probe, mm

Purpose

probe F-0,3

 0-300 μm ±(0,03h+0,001) mm  Ø5×40 Measurement of paint, varnish and galvanic coatings
probe F-0,5  0-500 μm ±(0,03h+0,001) mm

 Ø 8×15

probe F-2

 0-2000 μm ±(0,03h+0,002) mm  Ø 10×35 Measurement of paint and varnish coatings
probe F-5  0-5000 μm ±(0,03h+0,002) mm  Ø 18×40

Measurement of paint, varnish and mastic coatings

Coating on the non-magnetic metals (Any (dielectric or metal) coatings on non-ferrous metals and alloys)

probe NF-2  0-2000 μm ±(0,03h+0,002) mm  Ø 12×35

Measurement of anodic-oxide films and paint coatings

Thick coatings on metals (dielectric coatings on metals)

probe M-12  0-12 mm ±(0,03h+0,02) mm

Ø 15×50

Measurement of mastic coatings

probe M-30

 0-30 mm ±(0,03h+0,03) mm  Ø 40×50
probe M-60  0-60 mm ±(0,03h+0,05) mm

 Ø 70×60

Measurement of surface roughness, Rz (After abrasive blasting pre-painting work)

probe DSH  2-300 μm ±(0,03h+0,002) mm Ø 18×40

Measurement of surface roughness after sand and shot blasting

Temperature, humidity and dew point

probe DT  -50 … +80 ° C  + / – 1 ° C  Ø 12×107

Temperature measurement

probe DTVR

Humidity: 0 – 100% ± 5%

Ø 50×120

Measurement of temperature, humidity and dew point

Temperature: -50 … 80 °C

± 1 ° C
Dew point: -15 – +40 °C

± 2 ° C

III. Standard NOVOTEST TP-2020 kit

  • NOVOTEST TP-2020 Ultrasonic Thickness Gauge
  • Standalone probe (optional)
  • Reference thickness samples
  • 2 Batteries (AA)
  • Charger
  • USB cable
  • Operating manual
  • Shipping Box.

Coating thickness gauge NOVOTEST TP-2020

IV. Video

***See more videos of ultrasonic coating thickness gauges at: Gmga Measuring Youtube.

Reviews

There are no reviews yet.

Be the first to review “Coating thickness gauge NOVOTEST TP-2020”

Your email address will not be published.