Concrete elastic hammer NOVOTEST SH

Price: Liên hệ

Model NOVOTEST SH
Manufacturer NOVOTEST
Power supply
Weight
Size
Condition Còn hàng
Warranty 12 tháng

I. Specification NOVOTEST SH concrete elastic hammer

Concrete elastic hammer NOVOTEST SH
  • This Schmidt material hardness test method is based on the effect of the piston acting on a concrete surface with a predetermined (normative) influence on the energy and then the height of the recovery striker is measured. The height of the rebound striker will be proportional to the strength of the concrete. The strength of the concrete is determined using the calibration charts provided with the instrument.
  • The Schmidt NOVOTEST SH concrete elastic hammer is easy to operate and has good design reliability and high measuring accuracy, so it is the most popular method for measuring the strength of concrete in the world. The strength test with Schmidt hammer corresponds to ASTM C 805; ASTM D 5873 (for stone); DIN 1048, p. 2; ENV 206; EN 12 504-2; ISO / DIS 8045.

There are several versions of the device, differing in impact energy:

  • The most powerful Rebound hammer, used to measure the strength of concrete with thicknesses from 70 to 100mm and beyond, and also to test the strength of large rock blocks with impact energy - 2,207J (Nm). This is the basis and most common model of the Schmidt hammer, about 90% of the Schmidt hammers in the world have the same impact energy.
  • The medium rebound hammer has an impact energy of 735J (735 Nm). The impact energy is reduced by three times compared to the base model. The main application of this instrument is to measure the strength of bricks and concrete products with wall thickness less than 100 mm and small sample size, also used to test rock and stone with less strength.
  • The minimum rebound hammer with the strongest impact strength is 196J (196Nm). The main purpose is to test the mortar strength of brick masonry.
Depending on the required tasks, it is always necessary for the user to select the correct model of the NOVOTEST SH concrete elastic hammer. All models, independent of the impact energy, are devices for non-destructive testing, therefore they do not destroy the test object. To verify the accuracy of the Schmidt hammer, a specially calibrated anvil is used. Correct operation instrument must display a certain value of standard anvil test. ***See more GMGA concrete hammers at: https://gmga.vn/en/danh-muc/testing-equipment/concrete-testing-equipment/

II. Specifications of Concrete elastic hammer NOVOTEST SH

Names / model

Schmidt Hammer NOVOTEST SH-225 Schmidt Hammer NOVOTEST SH-75 Schmidt Hammer NOVOTEST SH-20
Measurement range of strength, MPa 10 – 60 10 – 60

1 – 25

Impact energy, J

2207 735 196
Minimum thickness of testing object, mm 70 and more 50 – 100

30 and more

Measurement accuracy, %

10
Hardness value of impact plunger working surface, HRC, no less

60

Surface roughness of testing object, Ra um, no worse

40
Radius of impact plunger, mm

25

Operating temperature range, ° C

-20 … +50
Weight of the device, kg, no more

1

Gross weight of package, kg

1.7

III. Video

  ***More videos about the Schmidt Concrete Restoration Hammer are available at: Gmga Measuring Youtube.

Review Concrete elastic hammer NOVOTEST SH

5 0% | 0 review
4 0% | 0 review
3 0% | 0 review
2 0% | 0 review
1 0% | 0 review
Review Concrete elastic hammer NOVOTEST SH
Choose a image
0 character ( Minimum of 10)
    +

    There are no reviews yet.

    No comments yet

    SIGN UP FOR A CONSULTATION

    Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.

      COMMIT

      100% new product

      COMMIT

      100% refund if the product is of bad quality and not as promised

      24/7 SUPPORT

      Hotline: 0845 969 336

      DELIVERY

      Nationwide

      OTHER SAME PRODUCTS