Electronic coating thickness gauge NOVOTEST TP-1M

Buyer Rates Mã sản phẩm: 16825

Model: TP-1M
Manufacturer: NOVOTEST
Status: Stocking
Guarantee: 12 months
Price: Contact

The NOVOTEST TP-1M Electronic Coating Thickness Gauge is a versatile thickness gauge for measuring the ultrasonic thickness of various coatings on metals; and with dedicated probes connected to the instrument, NOVOTEST TP-1M can measure air temperature and humidity, surface temperature, calculate dew point, and also measure groove depth or surface roughness face.

Description

This NOVOTEST TP-1M electronic coating thickness gauge is easy to use, ready to use right out of the box and requires no special skills.

Minimal buttons and intuitive menus make the NOVOTEST TP-1M an ideal instrument for measuring the thickness of almost any coating with great accuracy.

I. Specification of coating thickness gauge NOVOTEST TP-1M

NOVOTEST TP-1M – Electronic measurement on steel:

  • The most common task is successfully solved by the device due to the thickness NOVOTEST TP-1M.
  • Typically, coating measurements in the 0 to 500 μm range require high accuracy; The NOVOTEST TP-1M coating thickness gauge with an F-0.5 probe is ideal. Alternatively, to measure coating thickness on products with a small radius, or in grooves, the user can use the dedicated probe F-0.3.

Electronic coating thickness gauge NOVOTEST TP-1M Electronic coating thickness gauge NOVOTEST TP-1M

NOVOTEST TP-1M – Electronic coating thickness measurement on non-ferrous metals:

  • To measure the coating thickness on non-ferrous metals, NOVOTEST TP-1M with NF-2 probe is used, which allows coating measurement in the range of 0 to 2 mm.
  • Calibration of the NF-2 probe is made simple with aluminum, if coatings are measured on materials whose properties are significantly different from those of aluminum, the NOVOTEST TP-1M coating thickness ultrasound machine can probe self-calibration.

Electronic coating thickness gauge NOVOTEST TP-1M

NOVOTEST TP-1M – Electronic coating strength measurement on steel:

  • For measuring coatings of paints, polymers and other dielectric coatings up to 5 mm; probes F-2 and F-5 are suitable, providing test ranges of up to 2 or 5 mm, respectively.
  • As with any measuring instrument: the wider the range, the higher the error, so when choosing a probe it is important to be guided by this principle to choose the best option.

novotest-tp-1m Electronic coating thickness gauge NOVOTEST TP-1M novotest-tp-1m

NOVOTEST TP-1M – Electronic coating thickness measurement up to 60 mm (60 000 μm):

  • For measuring very thick coatings on any metal (steel or non-ferrous) – probes M-12, M-30 and M-60 are used on the NOVOTEST TP-1M coating thickness gauge; it offers measuring ranges up to 12, 30 and 60 mm, respectively.
  • Be it bituminous insulation, coatings of polymeric tapes or some specific task of primary thickness measurement of materials, where ultrasonic waves cannot be used due to large attenuation in the material. whether heterogeneous or multi-layered.

Electronic coating thickness gauge NOVOTEST TP-1M

NOVOTEST TP-1M – Application measurement range:

  • The NOVOTEST TP-1M coating thickness gauge measures the depth and roughness of the groove. The DSH probe allows assessment of roughness, measurement of depth of corrosion, surface and groove defects. To determine the roughness, it is necessary to take a series of measurements on the surface of a small area, and then use the formula to calculate the desired value.
  • Measuring temperature, humidity and dew point – Using DTVR probe, NOVOTEST TP-1M can measure humidity and air temperature, based on which the device calculates dew point, which is very important to know before painting background paint.
  • Surface Temperature Measurement – NOVOTEST TP-1M uses DT probe to measure surface temperature by contact method.

novotest-tp-1m

NOVOTEST TP-1M – Ergonomic Design:

  • The NOVOTEST TP-1M Electronic Thickness Gauge is housed in an ergonomic housing, equipped with a silicone housing, which makes the electronics of the device impact resistant.
  • In addition, this gauge is resistant to extreme temperatures, and can be used at temperatures from -20 to +40 °C..

Electronic coating thickness gauge NOVOTEST TP-1M

Advantages of portable electronic coating thickness machine NOVOTEST TP-1M:

  • Large thickness measuring range
  • Convenient and easy to use
  • Shock resistance
  • Minimum number of controls: one button – one function
  • Backlit graphic display
  • Auto detect probe
  • Connected probe type indicator
  • Battery control.

***You may be interested in the GMGA Ultrasonic Thickness Gauge: https://gmga.vn/en/danh-muc/measuring-device/thickness-measuring-equipment/ultrasonic-material-thickness-gauge/

II. Specifications of NOVOTEST TP-1M electronic coating thickness gauge

Thickness measurement range(depends on probe type)

0 µm … 60 mm
Dimensions, mm

122x65x23

Operating temperature range, ° C

-20 … +40 ° C
Batteries

2 AA

Type of connectors of probes

Lemo
Storage of measurement results and PC software (optional)

256

Standards

AS 2331.1.4, AS 3894.3-B, AS/NZS 1580.108.1, ASTM B 499, ASTM D 7091, ASTM E 376, ASTM G 12, BS 5599, EN 13523-1, IMO MSC.215(82), IMO MSC.244 (83), ISO 1461, ISO 19840, ISO 2063, ISO 2178, ISO 2360, ISO 2808-7C, ISO 2808-7D, ISO 2808-12, NF T30-124, SSPC PA 2, US Navy PPI 63101-000, US Navy NSI 009-32,  ASTM D 1186-B, ASTM D 1400, BS 3900-C5-6B, BS 3900-C5-6A, BS 5411-11, BS 5411-3, DIN 50981, DIN 50984, ECCA T1, ISO 2808-6A, ISO 2808-6B, SS 184159.

Time of continuous work hours, not less

20
Weight of electronic unit with batteries, no more, kg

0.2

Specifications of probes for Coating Thickness Gauge NOVOTEST TP-1M:

Coatings on steel (dielectric and conductive coatings on ferromagnetic metals and alloys)

Type of probe Coating thickness measurement range Measurement accuracy Dimensions of the probe, mm

Purpose

probe F-0,3

 0-300 μm ±(0,03h+0,001) mm  Ø5×40 Measurement of paint, varnish and galvanic coatings
probe F-0,5  0-500 μm ±(0,03h+0,001) mm

 Ø 7×14

probe F-2

 0-2000 μm ±(0,03h+0,002) mm  Ø 9×35 Measurement of paint and varnish coatings
probe F-5  0-5000 μm ±(0,03h+0,002) mm  Ø 18×35

Measurement of paint, varnish and mastic coatings

Coating on the non-magnetic metals (Any (dielectric or metal) coatings on non-ferrous metals and alloys)

probe NF-2  0-2000 μm ±(0,03h+0,002) mm  Ø 14×53

Measurement of anodic-oxide films and paint coatings

Thick coatings on metals (dielectric coatings on metals)

probe M-12  0-12 mm ±(0,03h+0,02) mm

Ø 18×55

Measurement of mastic coatings

probe M-30

 1-30 mm ±(0,03h+0,03) mm  Ø 24×51
probe M-60  1-60 mm ±(0,03h+0,05) mm

 Ø 40×76

Measurement of surface roughness, Rz (After abrasive blasting pre-painting work)

probe DSH  2-360 μm ±(0,03h+0,002) mm Ø 20×50

Measurement of surface roughness after sand and shot blasting

Temperature, humidity and dew point

probe DT  -50 … +125 ° C  + / – 1 ° C  Ø 12×107

Temperature measurement

probe DTVR

Humidity: 0 – 100% ± 5% Ø 50×111 Measurement of temperature, humidity and dew point
Temperature: -50 … 125 °C

± 1 ° C

Dew point: -15 – +40 °C

± 2 ° C

III. Standard electronic coating thickness gauge NOVOTEST TP-1M

  • NOVOTEST TP-1M . electronic coating thickness gauge
  • Probe
  • Reference thickness samples
  • 2 Batteries (AA)
  • Charger
  • Operating manual
  • Shipping Box

IV. Video

***See more videos of coating and coating thickness gauges at: Gmga Measuring Youtube.

Reviews

There are no reviews yet.

Be the first to review “Electronic coating thickness gauge NOVOTEST TP-1M”

Your email address will not be published.