Insulation tester PCE-ITE 50

Buyer Rates Mã sản phẩm: 17170

Model: PCE-ITE 50
Manufacturer: PCE
Status: Stocking
Guarantee: 12 months
Price: Contact

Powerful PCE-ITE 50 insulation tester with large 3.5 inch color LCD display. The PCE-ITE 50 insulation tester offers different measurement modes like insulation resistance, grounding resistance, loop impedance, voltage, low impedance measurement and RCD test with camera function, capability the ability to record images in accordance with the measurements.

  • 3.5″ TFT LCD display
  • Loop resistors LN, L-PE and N-PE
  • Adjustable FI test current
  • SD Card and Bluetooth
  • Dual screen
  • Check FI good/bad
  • Low Ohm Measurement
  • Terminal voltage up to 1000V.

Description

I. Specification of PCE-ITE 50 insulation tester

Robust insulation tester / Resistance / Grounding resistance / Grinding impedance / Voltage measurement / Low resistance measurement / RCD tester.

Insulation tester PCE-ITE 50

  • The PCE-ITE 50 is a powerful installation tester with a large 3.5 inch color LCD display.
  • PCE-ITE 50 installation tester provides different measurement modes like insulation resistance, grounding resistance, loop impedance, voltage, Low impedance measurement and RCD test with camera function, the ability to record photos in accordance with the measurements.
  • With the PCE-ITE 50 installation checker, users can ensure that permanent installations are installed safely and correctly. Thanks to the dual displays, intuitive icons and high viewing angles, you can comfortably and quickly perform your measurements with the PCE-ITE 50 installation tester.
  • With the low resistance measurement of the PCE-ITE 50 installation tester, users can test ground conductors, potential equalization rails and protective conductors for low impedance.
  • The measuring range for low resistance measurements with the PCE-ITE 50 teser setting is between 0 – 2000 with a resolution of 0.001 – 1. Perhaps the most important measurement of the PCE-ITE 50 installation tester is the measurement. insulation resistance measurement. Electrical cables are placed under voltage during insulation measurement to detect fault currents, induce material migration or heat.
  • In most cases, the current faults are so small that they are not detected by the protective devices and in the worst case they can lead to a fire. The PCE-ITE 50 Installation Tester can perform installation measurements with test voltages of 125V, 250V, 500V or 1000V. The load current is in each case 1 mA.
  • The PCE-ITE 50 Installation Checker is independent of the mains supply. To bring all systems and circuits of the power supply system to a common potential (ground reference or potential reference) and to protect against short-circuit currents and overvoltages, the grounding resistance must be lowest possible impedance.
  • With a measuring range of 0 … 2000 with a resolution of 0.01 … 1, the DT-6650 installation tester provides all the prerequisites for meaningful grounding resistance measurement.

II. Advantages

Insulation tester PCE-ITE 50

  • 3.5″ TFT LCD display
  • Loop resistors LN, L-PE and N-PE
  • Adjustable FI test current
  • SD Card and Bluetooth
  • Dual screen
  • Check FI good/bad
  • Low Ohm Measurement
  • Terminal voltage up to 1000V.

***View more GMGA insulation testers at: https://gmga.vn/en/danh-muc/testing-equipment/insulation-testing-equipment/

III. Specifications of insulation tester PCE-ITE 50

Isolation test

Terminal voltage

Measuring range Resolution Accuracy Load current Short circuit current
125V (0 … 10 %) 0,125 … 4 MΩ 0.001 MΩ ± (2% + 10 digits) 1-mA @ Last 125 kΩ

<= 1-mA

4,001 … 40 MΩ 

0.01 MΩ ± (2% + 10 digits)
40,01 … 400 MΩ 0.1 MΩ

± (4% + 5 digits)

400,1 … 1000 MΩ

1 MΩ ± (5% + 5 digits)
250V (0 … 10 %) 0,125 … 4 MΩ 0.001 MΩ ± (2% + 10 digits) 1-mA @ Last 250 kΩ

<= 1-mA

4,001 … 40 MΩ 

0.01 MΩ ± (2% + 10 digits)
40,01 … 400 MΩ 0.1 MΩ

± (3% + 2 digits)

400,1 … 1000 MΩ

1 MΩ ± (3% + 2 digits)
500V (0 … 10 %) 0,125 … 4 MΩ 0.001 MΩ ± (2% + 10 digits) 1-mA @ Last 500 kΩ

<= 1-mA

4,001 … 40 MΩ 

0.01 MΩ ± (2% + 10 digits)
40,01 … 400 MΩ 0.1 MΩ

± (3% + 2 digits)

400,1 … 1000 MΩ

1 MΩ ± (4% + 5 digits)
1000 V (0 … 10 %) 0,125 … 4 MΩ 0.001 MΩ ± (3% + 10 digits) 1-mA @ Last 1 MΩ

 <= 1-mA

4,001 … 40 MΩ 

0.01 MΩ ± (2% + 10 digits)
40,01 … 400 MΩ 0.1 MΩ

± (3% + 2 digits)

400,1 … 1000 MΩ

1 MΩ ± (4% + 5 digits)
Low Ohm 

Measuring range

Resolution Accuracy Max. open circuit voltage Overload protection
2,000 Ω 0.001 Ω ± (1.5% + 30 digits) 5.8V

250 Vrms

20,00 Ω

0.01 Ω ± (1.5% + 3 digits) 5.8V 250 Vrms
200,0 Ω 0.1 Ω ± (1.5% + 3 digits) 5.8V

250 Vrms

2000 Ω

1 Ω ± (1.5% + 5 digits) 5.8V 250 Vrms
Continuity tester

Measuring range

Resolution Max. open circuit voltage Overload protection Short circuit current
2000 Ω 0.01 Ω 5.8V 250 Vrms

>= 200-mA

Grinding resistance

L-PE (Hi-Amp): Load current 4.0 A

Measuring range Resolution

Accuracy

0.23 … 9.99 Ω

0.01 Ω ± (4% + 4 digits)
10.0 … 99.9 Ω 0.1 Ω

± (4% + 4 digits)

100 … 999 Ω

1 Ω ± (4% + 4 digits)

L-PE (without tripping): Load current 15-mA

Measuring range

Resolution Accuracy
0.23 … 9.99 Ω 0.01 Ω

± (5% + 6 digits)

10.0 … 99.9 Ω

0.1 Ω ± (5% + 6 digits)
100 … 999 Ω 1 Ω

± (5% + 6 digits)

L-N: Load current 4.0 A

Measuring range

Resolution

Accuracy

0.23 … 9.99 Ω 0.01 Ω

± (4% + 4 digits)

10.0 … 99.9 Ω

0.1 Ω ± (4% + 4 digits)
100 … 999 Ω 1 Ω

± (4% + 4 digits)

RCD Test

RCD (In)

10-mA, 30-mA, 100-mA, 300-mA, 650-mA, 1 A
Factors

x 1/2, x1, x2, x5

Accuracy of the tripping time

± (1% + 1 ms)
Signal form of the test current

Sine (AC), pulse (DC)

Tripping characteristics

G and S
Release time

0° or 180°

Voltage range

194 … 260V AC (50/60 Hz)
Accuracy of current measurement

± (5% + 2 digits)

RCD Types

Type A, Type B

Voltage measurement

Measuring range

Resolution Accuracy
80…500 V AC/DC 1 V

± (2 % + 2 digits)

Frequency measurement

Measuring range

Resolution Accuracy
45…65 Hz 1 Hz

±2 Hz

Grounding measurement

Measuring range

Resolution Accuracy
0.00…99.99 Ω 0.01 Ω

± (2% + 30 digits)

100.0…999.9 Ω

0.1 Ω ± (2% + 6 digits)
1000…2000 Ω 1 Ω

± (2% + 6 digits)

General specifications

Power supply

8 x 1.2 … 1.5V AA batteries
Operating time

ca. 15 h

Measurement category

CAT III 600V
Protection class

IP 65

Display

3.5″ TFT (320 x 240 Pixel)
Operating environment

0 … 45°C

0 … 95% rH, non condensing

Measurements

24.2 x 10.5 x 14.5 cm

Weight

1.56 kg / 3.4 lbs

 

***Video of insulation measuring device is available at: Gmga Measuring Youtube.

Reviews

There are no reviews yet.

Be the first to review “Insulation tester PCE-ITE 50”

Your email address will not be published.