Leeb hardness tester PCE-2000N including ISO certificate

Buyer Rates Mã sản phẩm: 17210

Model: PCE-2000N / ISO
Manufacturer: PCE
Status: Stocking
Guarantee: 12 months
Price: Contact

Leeb Hardness Tester – The PCE-2000N hardness meter uses the Leeb recovery method. This is a method of dynamic hardness testing in which a standardized test piece, usually a hard metal ball, is struck with a specified impact energy on the test surface.

  • Measure by Leeb Rebound method
  • Hardness scale: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
  • Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
  • External impact device on 1.5 m / 4.9 ft . cable
  • Accuracy: ±0.5% (@800 HLD), Repeatability: 0.8% (@800 HLD)
  • Measure data stored on USB stick
  • Color display, can measure at different angles
  • Includes ISO Calibration Certificate.

Description

I. Specification of Leeb hardness tester PCE-2000N

Hardness Tester – Hardness Tester for Metallic Materials PCE-2000N / Various impactors are optionally available / 7 different hardness ranges / Data storage on USB.

Leeb hardness tester PCE-2000N including ISO certificate

  • Hardness Tester – The PCE-2000N handheld hardness tester uses the Leeb recovery method. It is a method of dynamic hardness testing in which a standardized test piece, usually a hard metal ball, is struck with a specified impact energy on the test surface.
  • The impact of a hard metal ball on the test surface leads to plastic deformation of the surface at the point of impact. From this strain leads to energy loss, which is proportional to the stiffness of the workpiece and can be determined by the ratio of recovery to the impact velocity of the test piece.
  • This technology allows for a compact design, making it particularly suitable for durometers. In contrast to static testing methods with heavy-duty hardness testers, portable hardness testers can be used very flexibly in incoming or outgoing testing, in manufacturing and in general in all fields. areas where hardness has an influence on quality parameters.
  • Hardness Tester from PCE Instruments can be used to measure six different hardness scales (HL, HV, HRA, HRC, HB, HV, HS) as well as ten different materials.
  • As standard, the PCE-2000N durometer is supplied with a D probe, but optional additional impacts (DC, DL, C, D + 15, E, G) can be appropriate and responsive. for more specific applications.
  • In addition, data can be directly saved on a USB memory stick, which further expands the versatility of this portable hardness tester.
  • With an easy-to-read OLED display, ergonomic housing and icon-based menu navigation, handling of the mobile hardness tester is extremely user-friendly.

PCE-2000N including ISO certificate Leeb hardness tester PCE-2000N including ISO certificate Leeb hardness tester PCE-2000N including ISO certificate

II. Advantages

  • Measures all common hardness parameters
  • External impact device on 1.5 m / 4.9 ft . cable
  • Large measuring range
  • High precision
  • Measure data stored on USB stick
  • More effects like accessories
  • Can measure at different angles
  • Color display
  • Includes ISO Calibration Certificate.

PCE-2000N including ISO certificate Leeb hardness tester PCE-2000N including ISO certificate PCE-2000N including ISO certificate

III. Standard package

Leeb hardness tester PCE-2000N including ISO certificate

  • 1 x Hardness tester PCE-2000N
  • 1 x Hardness comparison block
  • 1 x Striker type D
  • 1 x Transport case
  • 1 x Cleaning brush
  • 1 x User manual
  • 3 x AA 1,5V-batteries
  • 2 x Stabilization ring
  • 1 x 2 GB USB stick

***View more of the GMGA handheld durometer at: https://gmga.vn/en/danh-muc/measuring-device/hardness-measuring-equipment/

IV. Specifications of Leeb hardness tester PCE-2000N including ISO certificate

Measuring ranges

170 … 960 HLD

17.9 … 69.5 HRC

19 … 683 HB

80 … 1042 HV

30.6 … 102.6 HS

59.1 … 88 HRA

13.5. .. 101.7 HRB

Impact device included

D

(optional impact devices)

(DC, D + 15, C, G, DL)
Cable length impact device

About 1.5 m / 4.9 ft

Accuracy

± 0.5% (@ 800 HLD)
Repeatability

0.8% (@ 800 HLD)

Hardness scales

HL (Leeb)

HV (Vickers)

HB (Brinell)

HS (Shore)

HRA (Rockwell A)

HRB (Rockwell B)

HRC (Rockwell C)

Measurable materials

Steel

Cast steel

Alloy steel

Stainless steel

Gray glacé

Ductile iron

Cast aluminum alloy

Cu-zinc (brass)

Copper-tin alloy,

Copper

Display resolution

128 x 64 pixel OLED

Data storage

600 averages in 6 data groups
Data output

USB stick

Power supply

3 x AAA batteries
Auto Power-Off

if not in use, the device shuts off automatically after 12 minutes

Operating conditions

10 … 50°C / 50 … 122°F, 20 … 90% rh
Storage conditions

-30 … 60°C / -22 … 140°F

Dimensions

160 x 80 x 40 mm / 6.3 x 3.1 x 1.6 in (H x W x D)
Weight

Measuring device with batteries: approx. 300 g / < 1 lb

Impact device : approx. 75 g / < 1 lb

Material

Steel / cold rolled steel

HRA 59.1 … 85.8

HRC 20 … 68.5

HRB 38.4 … 99.6

HB 127 … 651

HSD 32.2 … 99.5

HV 83 … 976

Alloyed tool steel

HRC 20.4 … 67.1

HV 80 … 898

Stainless steel

HRB 46.5 … 101.7

HB 85 … 655

HV 85 … 802

Cast iron

HB 93 … 334

Ductile iron

HB 131 … 387
Cast aluminum

HRB 23.8 … 84.6

HB 19 … 164

Brass

HRB 13.5 … 95.3

HB 40 … 173

Bronze

HB 60 … 290

Copper

HB 45 … 315

V. Video

 

***See more videos about material hardness testers at: Gmga Measuring Youtube.

Reviews

There are no reviews yet.

Be the first to review “Leeb hardness tester PCE-2000N including ISO certificate”

Your email address will not be published.