PCE-DFG NF 50K force gauge including ISO certification

Buyer Rates Mã sản phẩm: 17272

Model: PCE-DFG NF 50K
Manufacturer: PCE
Status: Stocking
Guarantee: 12 months
Price: Contact

PCE-DFG NF 50K Force Gauge – Compressor with external load cell attachment designed to measure compressive forces at hard-to-reach measuring points. The probes have several threaded holes at the bottom allowing for a secure installation during measurement.

  • Measuring range: 0 … 50 kN / 50,000 N / 5,000 kg / 11,240 lbs
  • Resolution: 0.5 N / 0.1 lbs
  • Accuracy: ±0.5%
  • Memory up to 100 measurements
  • USB interface
  • Graphic display
  • Includes ISO Calibration Certificate.


I. Specification of PCE-DFG NF 50K force gauge

Force meter PCE-DFG NF 50K / With external load probe accessory / USB interface and PC software.

PCE-DFG NF 50K force gauge including ISO certification

  • The PCE-DFG NF 50K force gauge with an external load cell is designed to measure compressive forces at hard-to-reach measuring points. The load cells are connected to the dynamometer by means of a sensing cable up to 3 m in length, and with its small size it guarantees flexible measurements and applications. Gauge load cells have several threaded holes on the underside, allowing for permanent installation during force test measurement.
  • The dynamometer can operate at sampling rates up to 1600 Hz. The sampled measured values ​​are displayed as instantaneous values, as well as in the graphs that are tracked directly in the dynamometer.
  • Measurements can be stored in the internal memory or transmitted via the USB interface with the included software up to 800 Hz as live measurements.
  • The PEAK Hold function allows the highest measured value in the dynamometer to be frozen until this value is exceeded or cleared.
  • This digital force gauge offers the option of storing two limit values, which are continuously compared with the instantaneous value. When these limits are exceeded or dropped a signal is displayed in the dynamometer display, as well as feedback via external interfaces, e.g. this can be used to control the tester tra.

PCE-DFG NF 50K force gauge including ISO certification PCE-DFG NF 50K force gauge including ISO certification

***View more GMGA force gauges at: https://gmga.vn/en/danh-muc/measuring-device/force-measuring-equipment/

II. Specifications PCE-DFG NF 50K dynamometer

Measuring range

0 … 50 kN / 50.000 N / 5.000 kg / 11.240 lbs

5 N / 1,1 lbs


± 0.5% of the measuring range
Measurement units

N, kg, lb, kPa


2.8″ TFT graphic display
Alarm Modes

Inside, Outside, Crack, Shutdown

Sampling rate

6 … 1600 Hz

100 measurements

Power supply

NiMH battery, 6V / 1600-mAh
Battery life

About 10 hours

Power adapter / charging adapter      

12V / 1A

Interface: USB switching output: 12V / 50-mA

Protection class

IP 54
Operating and storage conditions   

-10 … 50°C / -14 … 122°F

5 … 95% rh non-condensing

Dimensions load cell

Ø 32 mm / H 16 mm / M5 thread

(see technical drawing)

Cable length load cell

About 3 m / 9.8 ft

200 x 97 x 42 mm / 7.9 x 3.8 x 1.7 in


600 g / 1.3 lbs


***Video of digital force gauges available at: Gmga Measuring Youtube.


There are no reviews yet.

Be the first to review “PCE-DFG NF 50K force gauge including ISO certification”

Your email address will not be published.