Real-time CAN to Ethernet interface for remote network access Kvaser Ethercan HS supports REST API and t programming

Price: Contact

Model EAN: 73-30130-00976-9
Manufacturer Kvaser
Power supply PoE IEEE 802.3af or CAN +9V to +35V DC
Weight 120 g
Size 35 x 165 x 17 mm
Condition Stocking
Warranty 24 months

Real-time CAN to Ethernet interface for remote network access Kvaser Ethercan HS makes it easy to implement the "Internet of Things" (IoT) concept by enabling data from any CAN product or system to be sent over a corporate network or WAN, using the standard Kvaser CANlib API. Users of the Kvaser Ethercan HS can also choose to connect to the device using the built-in REST API for web-enabled devices, such as smartphones.

As a programmable interface, the Kvaser Ethercan HS interface is suited to advanced applications, such as ECU reflashing. For example, a t program could be created to process CAN messages locally in the device, removing the latency of WiFi and/or Ethernet.

I. Major features of Real-time CAN to Ethernet interface Kvaser Ethercan HS

  • Networked CAN interface with Kvaser t programmability.
  • Supports ISO 11898-1 with both 11-bit and 29-bit CAN identifiers.
  • Compatible with applications written for other Kvaser CAN hardware using Kvaser CANlib.
  • One high-speed CAN connection (compliant with ISO 11898-2), 40 kbit/s up to 1 Mbit/s.
  • Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet.
  • Supports Kvaser REST API.
  • Ethernet connection with auto-MDIX using a standard shielded RJ45 socket.
  • Built-in Power over Ethernet (PoE), allows the device to receive both data and power over a single Ethernet cable.
  • Small and lightweight plastic housing.

Real-time CAN to Ethernet interface for remote network access Kvaser Ethercan HS supports REST API and t programming (EAN: 73-30130-00976-9)

II. The t programming language

  • The Kvaser t programming language is event oriented and modelled after C. It can be used to customize the behavior of the Kvaser Ethercan HS and other Kvaser t capable devices.
  • A t program is invoked via hooks, which are entry points that are executed at the occurrence of certain events. These events can be, for example, the arrival of specific CAN messages or a timer expiration.
  • Like any Kvaser CAN interface, the Kvaser Ethercan HS can be used via CANlib on a host computer. The addition of t programs running directly on the Kvaser Ethercan HS makes it possible to react much quicker to CAN bus events (for example to speed up file transfer protocols or to simulate missing hardware).
  • For more information, see the Kvaser t Programming Language guide that can be downloaded at: kvaser.com/download.

III. Additional software and documentation cho Real-time CAN to Ethernet interface

  • The Kvaser CANlib SDK includes everything you need in order to develop software applications interacting with Kvaser CAN and LIN hardware. The SDK contains full documentation and many sample programs, written in C, C++, C#, Delphi, Python and Visual Basic. Kvaser CAN and LIN hardware is built around the same common software API. Applications developed using one device type will run without modification on other device types.
  • The latest versions of documentation, software and drivers can be downloaded for free at: kvaser.com/download.

IV. Kvaser Ethercan HS hardware

Hardware installation:

  • The Kvaser Ethercan HS may be inserted into any free Ethernet socket. If the Ethernet socket does not support Power over Ethernet, power must be supplied on the CAN connector. For the Kvaser Ethercan HS to communicate with the host computer, a compatible version of the Kvaser driver and firmware must be installed. After the driver has been installed on the host computer, the firmware may then be downloaded and installed on the Kvaser Ethercan HS.

Network connector:

  • The Kvaser Ethercan HS has a standard shielded RJ45 socket (STP) ethernet connector. Connect the Kvaser Ethercan HS to your network or directly to your host computer for first time configuration.

Kvaser Ethercan HS supports REST API and t programming (EAN: 73-30130-00976-9)

Ethercan Factory Reset Device:

  • The Ethercan Factory Reset Device is used to reset the Kvaser Ethercan HS configuration.

Real-time-can-to-ethernet-interface-for-remote-network-access-kvaser-ethercan-hs-supports-rest-api-and-t-programming-ean-73-30130-00976-9

CAN channels:

  • The Kvaser Ethercan HS has one CAN Hi-Speed channel with a 9-pin D-SUB connector.

Power supply:

  • The Kvaser Ethercan HS is powered either from the Ethernet connector using PoE or from the CAN connector. The Kvaser Ethercan HS is compliant with PoE IEEE 802.3af supporting both Mode A (endspan) and Mode B (midspan).

LED indicators:

The Kvaser Ethercan HS has four LEDs

Real-time CAN to Ethernet interface for remote network access Kvaser Ethercan HS supports REST API and t programming (EAN: 73-30130-00976-9)

LED

General meaning
PWR (Green)

Steady light when unit is powered and working.

CAN (Yellow)

CAN channel status.
ERR (Red)

Indicates different types of errors.

LAN (Yellow)

LAN connection status.

Fast flashing when waiting for DHCP lease.

Slow flashing when ready for connection as remote device.

Steady light when device is connected as a remote device.

The ERROR LED indicator can give more information about the cause of failure

ERROR LED Signal

Auxiliary Signal General Meaning
Blink CAN LED blinks

CAN channel is in error passive mode

Slower blink

CAN LED blinks CAN channel is bus off
Short flash -

Error frame detected

Technical data of Real-time CAN to Ethernet interface for remote network access Kvaser Ethercan HS

CAN Channels

1
CAN Transceiver

TJA1051T (Compliant with ISO 11898-2)

CAN Bit Rate

40 kbit/s up to 1 Mbit/s
Time stamp resolution

25 μs

Error Frame Detection

Yes
Error Frame Generation

No

Silent mode

No
Kvaser CANtegrity

No

Host interface

Ethernet
Host OS

Windows (7 or later)

Ethernet interface

Ethernet IEEE 802.3u 100BASE-TX
Ethernet connector

Shielded RJ45 socket STP

Galvanic isolation

Yes
Power Supply

PoE (Power over Ethernet) IEEE 802.3af or CAN +9V to +35V DC

Power consumption

Typical 1.2 W
Hardware configuration

Done by software.

Dimensions

35 x 165 x 17 mm for body incl. strain relief
Weight

120 g including cables and connectors.

Operating temperature

−20 ◦C to +70 ◦C
Storage temperature

−40 ◦C to +85 ◦C

Relative Humidity

0 % to 85 % (non-condensing.)

Review Real-time CAN to Ethernet interface for remote network access Kvaser Ethercan HS supports REST API and t programming

5 0% | 0 review
4 0% | 0 review
3 0% | 0 review
2 0% | 0 review
1 0% | 0 review
Review Real-time CAN to Ethernet interface for remote network access Kvaser Ethercan HS supports REST API and t programming
Choose a image
0 character ( Minimum of 10)
    +

    There are no reviews yet.

    No comments yet

    SIGN UP FOR A CONSULTATION

    Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.

      COMMIT

      100% new product

      COMMIT

      100% refund if the product is of bad quality and not as promised

      24/7 SUPPORT

      Hotline: 0845 969 336

      DELIVERY

      Nationwide

      OTHER SAME PRODUCTS