Steel structure analyzer KRC-M2

Buyer Rates Mã sản phẩm: 17301

Model: KRC-M2
Manufacturer: NOVOTEST
Status: Stocking
Guarantee: 12 months
Price: Contact

Structural Steel Analyzer or Force Gauge NOVOTEST KRC-M2 is used for non-destructive testing of heat and thermomechanical treatments, evaluation of mechanical properties and residual stresses, based on principle Force measurement of metal products according to IEC 60404-7 standard.

Description

The KRC-M2 Steel Structure Analyzer is used to determine the mechanical properties, and to measure the hardness of metal products, as well as to measure the products of ferromagnetic alloys, when there is a correlation between parameters studied. In addition, the instrument is used to test the surface layer of ferromagnetic materials for metal classification in steel grades.

I. Specification KRC-M2 steel structure analyzer

Steel structure analyzer KRC-M2

  • The KRC-M2 Steel Structure Analyzer is used to determine the mechanical properties, and to measure the hardness of metal products, as well as to measure the products of ferromagnetic alloys, when there is a correlation between parameters studied. In addition, the instrument is used to test the surface layer of ferromagnetic materials for metal classification in steel grades.
  • The KRC-M2 has an electromagnet generator with a built-in Hall sensor and detachable terminals.
  • The principle of operation of this analyzer consists of the following steps: initial magnetization of the area of ​​the object under test and then its subsequent progressive demagnetization by increasing the field. Next, fix the strength of the magnetic field to match the coercive force of the material under test and measure the signal amplitude from the Hall sensor.
  • The main application of using the NOVOTEST KRC-M2 Steel Structure Analyzer is to analyze the stress and remaining life of pipelines, elevators, cranes and elevators, pressure vessels, steel cables of bridges. Also used in industries and metallurgy.

II. Advantages

  • Probe with optional display and control buttons of main functions
  • Averaging 99 results, with the possibility of using predictive average
  • Memory: up to 100,000 measurements with the ability to view them on the device’s screen or transfer to a PC
  • Real-time clock – each measurement is saved by date and time
  • Possibility to import additional scales and additional materials for calibration
  • Calibration mode of basic and additional scales
  • Adjust screen brightness, sound, language selection
  • Possibility to save backup calibrations to the device’s internal memory
  • Smart sensor with built-in calibration memory.

***You may be interested in GMGA ultrasonic weld inspection equipment: https://gmga.vn/en/danh-muc/maintenance-equipment/ultrasonic-weld-testing-equipment/

III. Specifications of Steel structure analyzer NOVOTEST KRC-M2

Standard modes

Measurement of coercive force

Current measurement

Code measurement (units)

Additional scale for calibration

 The measuring range of the coercive force, А/сm (А/m)

 1-40,0  (100-4000)
 Measurement cycle, seconds, not more

 5

 Magnetize

 pulse
 Additional scale for calibration

 7

 Power

Li-Ion battery
 Battery life, h, not less

 8

 Dimensions of the electronic unit, mm

 270x230x70
 Dimensions of the probe, mm

 200x170x70

 

IV. Video

 

***See more videos of steel structure analysis equipment at: Gmga Measuring Youtube.

Reviews

There are no reviews yet.

Be the first to review “Steel structure analyzer KRC-M2”

Your email address will not be published.