Surface roughness tester PCE-RT 2300-ICA/ ISO

Buyer Rates Mã sản phẩm: 17086

Model: PCE-RT 2300
Manufacturer: PCE
Status: Stocking
Guarantee: 12 months
Price: Contact

Surface Roughness Tester – PCE-RT 2300 profile gauge is used to measure surface roughness. The PCE-RT 2300 profile tester has a removable motorized sensor that allows the material tester to determine the profile surface roughness even on small or narrow profiles. Download free software for remote testing and data saving.

  • Large measuring range: Rz: 0.02 μm … 320 μm; Ra, Rq: 0.005 μm … 32 μm
  • Accuracy: ±10%
  • Repeat Accuracy: ±7%
  • Configure touch screen and bluetooth connection
  • Sensor with diamond test head
  • Optional sensor and extension rod for small holes and curved surfaces
  • Includes ISO Calibration Certificate.

Description

I. Specification of Surface roughness tester PCE-RT 2300-ICA/ ISO

PCE-RT 2300-ICA Surface Profile Tester included. ISO calibration certificate / Portable material tester for quick detection of roughness (Ra, Rz, Rq, Rt and more) / Removable motor parts / Touch screen interface / Range micro 320 μm or 12.6

Surface roughness tester PCE-RT 2300-ICA/ ISO

  • Configuration Gauge – The PCE-RT 2300 Surface Tester is used to measure surface roughness.
  • This PCE-RT 2300 profiler features a removable motorized sensor. This property allows the surface roughness to be determined by the profile even on small or narrow profiles.
  • Measured values ​​are displayed on the configuration’s large LCD screen. This monitor is also used by the profiler. Profilometer is powered by an internal battery with voltage. This battery can be powered by a regular USB power adapter.
  • The removable motorized sensor is connected by cable to the main body of the profiler. The diamond pen is installed in the motorized sensor. This press has a maximum force of 4 mN on the surface from which the roughness profile will be measured. Profilometer measurements according to ISO, ANSI and JIS standards are valid for profilometer measuring instruments.

Standard symbols:

  • Rz = average roughness. The mean roughness depth Rz is the arithmetic mean of the maximum individual seam depth of a number of adjacent individual gauge sections.
  • Ra = arithmetic mean roughness. Ra is an internationally recognized and applied roughness parameter. This is the arithmetic mean of the absolute values of the configuration deviations in the reference line. The measured value Ra is always less than the value of Rz determined on the same roughness profile.
  • Rt = maximum roughness. Maximum surface roughness Rt is the distance between the highest point and the lowest point of the measuring part.
  • Rq = Square Mean Roughness. Rq is the root mean square of all coordinate values in the individual measured distance l. Rq corresponds to specified RMS (Root Mean Square).

Configuration meter Surface roughness tester PCE-RT 2300-ICA/ ISO Configuration meter

  • Touch screen interface and bluetooth PC connection
  • Measure all roughness profile values
  • Battery and power operation
  • Various filters can be adjusted
  • Diamond test head
  • Detachable motorized sensor
  • Large measuring range of Rz: 0.02 μm … 320 μm; Ra, Rq: 0.005 μm … 32 μm
  • Includes ISO Calibration Certificate.

Surface roughness tester PCE-RT 2300-ICA/ ISO Configuration meter Configuration meter

II. Standard package

Surface roughness tester PCE-RT 2300-ICA/ ISO

  • PCE-RT 2300 Configuration Meter
  • Microprobes
  • Detachable motorized sensor
  • 2 Connection cable for engine unit
  • Charger
  • Interface cable
  • User manual
  • ISO Calibration Certificate.

***See more GMGA roughness gauges at: https://gmga.vn/en/danh-muc/measuring-device/roughness-measuring-equiment/

III. Specifications of Surface roughness tester PCE-RT 2300-ICA/ ISO

Measuring range

Rz: 0.02 μm … 320 μm; Ra, Rq: 0.005 μm … 32 μm
Accuracy

± 10%

Repeatability

± 7%
Resolution

± 20 μm: 0.01 μm

± 40 μm: 0.02 μm

± 80 μm: 0.04 μm

Measurement Parameters

Ra, Rz, Rq, Rt, Rc, Rp, Rv, R3z, R3y, Rz (JIS), Ry, Rs, Rsk, Rku, Rmax, Rsm, Rmr, RPc, Rk, Rpk, Rvk, Mr1, Mr2
Measurement Standards

ISO4287, ANSI b46.1, DIN4768, JISb601

Graphic

Primary profile (roughness + waviness)

Roughness profile (roughness)

Loading curves

Measuring filter

RC, PC-RC, Gaus, DP

Measuring section (Cut Off)                                       

0.25 mm, 0.8 mm, 2.5 mm
Measuring length

1 … 5* measuring path

Max. 17.5 mm (including pre- and post-run)

Sensor

Diamond probe tip 90°

5 μm

Contact force sensor

<4 mN

Feed rate  

0.25 mm: 0.135 mm / s

0.8 mm: 0.5 mm / s

2.5 mm: 1 mm / s

Display

3.5″ LCD screen

Power supply

3.7V Li-Ion Battery

5V / 800-mA USB Power Adapter

Operating time

50 h
Operating conditions

-20 … 40°C / -4 … 104°F, max. 90% rh

Storage conditions

-40 … 60°C / -40 … 140°F, max. 90% rh
Dimensions

Main unit: 158 x 55 x 52 mm / 6.2 x 2.2 x 2 in

Motor unit: 115 x 23 x 27 mm / 4.5 x 1 x 1.1 in 

Weight

About 500 g / 1.1 lbs

 

IV. Video

 

***Product main path: Roughness Tester PCE-RT 2300-ICA Incl. ISO Calibration Certificate

Reviews

There are no reviews yet.

Be the first to review “Surface roughness tester PCE-RT 2300-ICA/ ISO”

Your email address will not be published.