Tensile – compression and bending testing machine of materials PCE-UTU 2

Buyer Rates Mã sản phẩm: 17041

Model: PCE-UTU 2
Manufacturer: PCE
Status: Stocking
Guarantee: 12 months
Price: Contact

PCE-UTU 2 Material Tensile, Compression and Bending Tester is a professional tester for testing tensile, compression and bending tests. Using these test methods, the material test bench can determine important material properties, for example elongation, yield strength or tensile strength of the specimen. With the PCE-UTU 2 Tensile Tester, tensile testing with a maximum force of 2 kN is possible.

  • Measuring range: 0.04 … 2 kN
  • Accuracy class: 0.5
  • Extensive configuration options
  • Controlled DC motor.

Description

I. Specification of tensile – compression and bending testing machine of materials PCE-UTU 2

PCE-UTU 2 Universal Testing Machine / Power Tester for Tensile Testing / Create Tension Diagrams / Various Designs / Driven DC Motor / Interrupt Identification / Variable Test Speed / Force adjustment / Omplex configurability

Tensile - compression and bending testing machine of materials PCE-UTU 2

  • PCE-UTU 2 Material Tensile, Compression and Bending Tester is a professional force tester to perform tensile, compression and bending tests.
  • Using these test methods, the PCE-UTU 2 material test stand can determine important material properties, for example elongation, yield strength or tensile strength of the specimen.
  • With the PCE-UTU 2 material test stand, tensile tests with a maximum force of up to 2 kN. These tensile tests are a standardized destructive process used in material testing.
  • Normalized samples with a defined cross-sectional area are stretched and broken by force. The elongation of the test piece is equal to the impact-free material test stand and to a uniform force.
  • In other test cases, this tensile – compression and bending testing machine of materials PCE-UTU 2, compressive and flexural strength tester provides the ability to determine yield strength, tensile strength and elongation at break of tensile test pieces . Once measured, the material test stand provides detailed results, which are displayed in the software, e.g. tension diagrams.
    • Measuring range: 0.04 … 2 kN
    • Accuracy class: 0.5
    • Extensive configuration options
    • Controlled DC motor
    • Variable test speed
    • Powder coated shell parts
    • Break detection
    • Maximum value memory.

***You may be interested in Gmga tensile tester: https://gmga.vn/en/danh-muc/testing-equipment/versatile-test-equipment/

II. Specifications of PCE-UTU 2 material tensile, compression and flexural testing machine

Rated load

2000 N
Accuracy class

0.5 / EN 7500-1

Drive

controlled DC motor
Test speed

0.001 … 500 mm/min, Resolution: 1 µm

Distance measurement

incremental
Standard stroke

1000 mm (Without tensioning and tensioning adapters)

Work-life

450 mm
Supply

230 V AC, 50 Hz

Framework

2 ground guide columns

2 ball circulating spindles

Column cover with bellows seal

Limit switch for travel limit

Powder coated housing parts

Colour: RAL 7035

Safety devices

Enclosure from Makrolon

Safety switching contact

Measurements

HxWxD 1330 x 650 x 530 mm
Weight

ca. 140 kg

Force transducer for UPM

Installed underneath the mobile traverse for compressive and tensile forces.

Measuring range

0.04 … 2 kN
Nominal value

2 mV/V

Relative characteristic deviation

≤ ±0.1 %
Relative linearity deviation

≤ ±0.02 %

Relative creep error

≤ ±0.03 % after 30 min

≤ ±0.07 % after 8 h

Accuracy class

to EN ISO 7500-1, Class 0.5
Overload

50%

Protection class

IP 67
TEDS module

integrated, to IEEE 1451-4

automatic sensor detection

Control and evaluation electronics

Measured value acquisition

1 kHz
Display

LC-Display

Interface

RS-232
Functions

Force regulation

Distance regulation

Manual positioning

Processing of a programmed sequence

Specification of the crosshead speed

Return to the starting position

Cycles

Presetting limits for force / distance / time

Resetting the force / distance indicator to 0

Adjustable control factor

Breaking recognition

Maximum value memory

For 2 force transducer: choice of the work area

Intelligent measuring and control electronics

Processor

32 bit RISC architecture
Control circuit

> 1 kHz

TEDS module

Automatic sensor detection

Standard IEEE 1451-4

Interface

USB 2.0
A/D converter

2 x 24 bit A/D converter for strain gauge transducers

Sampling rate: > 50 kHz

2 x 10 bit A/D converter for processing additional signals

Sampling rate: > 50 kHz

1 x Incremental signal input for distance / angle measurement

Software

Functions

– Toolbox for free programming of test sequences

– Toolbox for free programming of calculations

– Freely configurable real-time graph with three axis overlay, free scaling and manual evaluation function

– Freely configurable report format with integration of image files

 

***Video of universal tensile testing equipment available at: Gmga Measuring Youtube.

Reviews

There are no reviews yet.

Be the first to review “Tensile – compression and bending testing machine of materials PCE-UTU 2”

Your email address will not be published.