Ultrasonic and impact hardness tester NOVOTEST T-UD3

Buyer Rates Mã sản phẩm: 17338

Model: T-UD3
Manufacturer: NOVOTEST
Status: Stocking
Guarantee: 12 months
Price: Contact

The NOVOTEST T-UD3 Ultrasonic and Impact Hardness Tester combines two indirect methods of hardness measurement: Ultrasonic Contact Impedance (ASTM A1038) and Leeb (ASTM A956). This makes it the most versatile mobile device in the world.

The ability to connect both probes combines the advantages of both methods and provides the user with the most suitable method to solve a particular task.

Description

Ultrasonic and impact hardness tester NOVOTEST T-UD3 allows users to measure the hardness of any metal, parts of different shapes and thicknesses, measure the hardness of surface hardeners for accurate results. and tensile strength assessment.

I. Specification Ultrasonic and impact hardness tester NOVOTEST T-UD3

Check out various shapes, structures, materials:

  • With the combined hardness tester T-UD3 users can measure the hardness of completely different metal products of different shapes, structures, materials and surface preparation levels with the same unit. taste, simply need to replace the probe.

Ultrasonic and impact hardness tester NOVOTEST T-UD3 Ultrasonic and impact hardness tester NOVOTEST T-UD3

Small spare parts

  • Using UCI, operators and testers can measure small products, we recommend parts weighing from 100 gr and thickness from 1 mm, and when using the UCI NOVOTEST Probe Test Stand test products can be even thinner.

Ultrasonic and impact hardness tester NOVOTEST T-UD3

Product measurement:

  • With the help of an ultrasonic transducer, users will be able to use the NOVOTEST T-UD3 ultrasonic and impact type durometer to tackle the tasks of measuring the hardness of grooves, small radius surfaces, inaccessible places and products with extremely complex shapes.

NOVOTEST T-UD3 Ultrasonic and impact hardness tester NOVOTEST T-UD3 NOVOTEST T-UD3

Impressive UCI probe:

  • Since the UCI probe has a penetration depth of only a few microns, it is possible to work with products with high printing requirements (maximum non-destructive method requirements), as well as to measure the hardness of hard layers. , such as nitriding and cementing.

Probe for UCI NOVOTEST T-UD3

Measuring spare parts:

  • Using the dynamic probe (Leeb probe), the user can test the hardness of large products with poorly prepared surfaces. The method also allows the measurement of products with a coarse grain structure without significant dispersion of the measurements, which optimizes the accuracy of the test.

Ultrasonic and impact hardness tester NOVOTEST T-UD3 Ultrasonic and impact hardness tester NOVOTEST T-UD3 Ultrasonic and impact hardness tester NOVOTEST T-UD3

Automatic calculation for different materials and scales:

  • With the presence of Leeb probe calibration for different materials and scales configured, the NOVOTEST T-UD3 ultrasonic and impact durometer has since become a universal tool for hardness measurement for most common metals.

Ultrasonic and impact hardness tester NOVOTEST T-UD3

Built-In camera:

  • The NOVOTEST T-UD3 durometer has a built-in camera, allowing the user to store an archive of image measurements of tested objects with hardness constraints to a specific location on the product. products – more intuitive test results.

Ultrasonic and impact hardness tester NOVOTEST T-UD3

Special software:

  • The NOVOTEST T-UD3 Combined Hardness Tester can be used with special software to operate with an archive of stored measurements. Or each saved series printed to a wireless printer can be added (optionally) to complete with the device.

Software of NOVOTEST T-UD3

II. Advantages

  • Small internal imprint (fits mirror surfaces of shaft collars, blades, gear teeth, etc.)
  • Hard layer surface hardness measurement
  • Wide hardness test range
  • Various measurement modes
  • 88 material combinations and hardness scales (calibrated)
  • Calibration of any scale in any range
  • Convenient and easy to measure
  • Optimized the number of buttons
  • Large full-color graphic display with bright backlight
  • Built-in camera for thorough reporting
  • Automatic identification of probe types
  • Connected probe type indicator
  • Calibrations are stored in the UCI . probe memory
  • Extended operating temperature range (frost, down to -40°C)
  • Internal memory and PC communication
  • New intuitive menu with tips on buttons
  • Optional wireless mini printer
  • Waterproof house
  • Rubber protective cover
  • Internal clock
  • Measure hardness value for any bulk product more than 1mm thick (small part, thin wall structure, pipe, tank, steel plate, complex shaped item, grade hardness test) metal coating, etc.)
  • Various modes of operation:
    • Graph – graph construction mode
    • Chart – chart builder mode
    • Statistics – provides statistics for the current set of measurements
    • Smart – filter out inaccurate measurements
    • Signal – shows probe signal (for Leeb probes only)).

III. Standard package of ultrasonic and impact hardness tester NOVOTEST T-UD3

Ultrasonic and impact hardness tester NOVOTEST T-UD3

  • Hardness tester
  • UCI probe (10N, 50N or 98N for choice)
  • Leeb probe (D type)
  • 3pcs AA batteries
  • Charger
  • USB cable
  • Operating manual
  • Software for PC
  • Case.

IV. Optional accessories

  • Additional UCI and Leeb probes (different types)
  • Different colors of rubber bumper protected case
  • Wireless printer
  • Batteries
  • Chargers
  • Hardness tests blocks
  • Set of support rings for D, DC type Leeb probes
  • Impact bodies for Leeb probes
  • Portable grinding machine
  • Case for hardness tester
  • Can be equipped with three types of UCI probes:

98N (10 kgf)

Special type of probe with increased load. To carry out the measurement, it is necessary to apply a load of 10 kgf (set automatically by the probe).Low surface cleanliness requirements. – Heat-treated and cemented parts with poorly prepared surface.- Measurement on blades, on the inner surface of pipes, holes with high roughness.

50 N (5 kgf)

The main type of probe for solving most hardness measurement tasks. To carry out the measurement, it is necessary to apply a load of 5 kgf (set automatically by the probe).Medium surface cleanliness requirements.

– Heat-treated and cemented parts, such as shafts, turbines, gears, teeth, welds, heat affected zones.

— Measurement in grooves, on teeth, in grooves, on radius surfaces.

— Measurement on the blades, on the inner surface of the pipes, holes.

10 N (1 kgf)

Probe with reduced load – designed to measure the hardness of products with increased requirements for the size of the print (polished, polished surfaces), to measure the hardness of thin surface hardened layers. For the measurement, a load of 1 kgf must be applied.More demanding on surface cleanliness, compared with U1 (50N).

– Nitrided and cemented surface layers of molds, dies, dies, thin-walled parts.

– Bearings, tooth flanks, saws.

– Hardness measurement of thin hardening coatings.- Measurement on products after thorough machining.

 

***You may be interested in the GMGA ultrasonic thickness tester: https://gmga.vn/en/danh-muc/measuring-device/thickness-measuring-equipment/

V. Specifications of ultrasonic and impact hardness tester NOVOTEST T-UD3

UCI probe types

1kgf (10N) 2.2 lbf

5kgf (50N) 11lbf

10kgf (98N) 22lbf

Leeb probe types

D

DC

DL

C

D+15

E

G

Measuring range

HRC:20~70

HB:90~650

HV:230~940

Tensile strength, MPa: 370~1740

User calibrations for any range (for example: HV100-1600)

Measuring accuracy

HRC: 2HRC

HB: 10HB

HV: 15HV

Standards

ASTM A1038

ASTM A956

ASTM E140

Indenter

UCI probe – Diamond indenter

Leeb probe – Hardened ball

Measuring direction

Any direction 360°

Data storage

Limited only by the memory card up to 32Gb
Communication

Upload data to PC and export as a spreadsheet (USB cable and software included )

Hardness scales

UCI probe – HRC, HB, HV

Leeb probe – HRC, HRB, HB, HV, HL, MPa

Additional custom scales for calibration

Materials

Ultrasonic (UCI) probe – pre-calibrated for steel

Dynamic (Leeb) pre-calibrated for steel, alloy steel, cast iron, stainless steel, aluminum, bronze, brass, copper

Additional custom materials for calibration

Data display

Load applied/contact (UCI)

Angle (Leeb)

Single test result

Max, Min, Average of tests

Number of tests,

Deviation

Var. coeff.

Histogram, Signal and Smart Modes (Filter of incorrect measurements).

Indication

Color LCD display (320×240)
Operating environment

Temperature:-20°C~40°C

Humidity: 30%~80%R.H.

Power supply

DC 4,5V (3 pcs batteries AA)

Instrument dimensions

160x75x30mm
Net weight

Approx. 0.3kg (without probe)

Gross weight (package)

2kg
Battery life

Approx. 10 hours.

Warranty

3 (1+2) years

VI. Video

Hardness tester with high precision UCI probe:

Built-in hardness tester works with Camera:

Built-in hardness tester with wireless printer operation:

 

***Product main path: http://novotest.biz/portable-hardness-novotest-t-ud3/

Reviews

There are no reviews yet.

Be the first to review “Ultrasonic and impact hardness tester NOVOTEST T-UD3”

Your email address will not be published.