Product

Categories

Product list

Showing all 5 results

CAN/CAN FD M12 to USB interface robust single-channel Kvaser U100-X2

Model: EAN: 73-30130-01267-7

CAN/CAN FD M12 to USB interface Kvaser U100-X2 is a small, yet powerful, CAN to USB interface, galvanically-reinforced with a 5-pole M12 connector. It provides real-time transmission and reception of standard and extended CAN messages on the bus with a high timestamp precision, and is compatible with applications that use Kvaser’s CANlib.

  • Supports CAN FD, up to 8 Mbit/s.
  • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
  • 20 000 msg/s, each timestamped with a resolution of 100 μs.
  • Fully compatible with J1939, CANopen, NMEA 2000® and DeviceNet.

CAN/CAN FD USB Type-C interface robust single-channel Kvaser U100-C

Model: EAN: 73-30130-01340-7

CAN/CAN FD USB Type-C interface Kvaser U100-C is a small, yet powerful, CAN to USB interface. It provides real-time transmission and reception of standard and extended CAN messages on the bus with a high timestamp precision, and is compatible with applications that use Kvaser’s CANlib.

This interface is based on the standard Kvaser U100 with DB-9 connector, but replaces the standard USB type “A” connector with the smaller USB-C format. As with other devices in the range, this is powered via the USB bus.

  • Supports CAN FD, up to 8 Mbit/s.
  • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
  • 20 000 msg/s, each timestamped with a resolution of 100 μs.
  • Fully compatible with J1939, CANopen, NMEA 2000® and DeviceNet.

CAN/CAN FD to USB interface robust single-channel Kvaser U100-X1 with 9-pin J1939-13 Type II CAN connector

Model: EAN: 73-30130-01266-0

CAN/CAN FD to USB interface robust single-channel Kvaser U100-X1 galvanically-reinforced with a 9-pin J1939-13 Type II CAN connector.

Signal and power isolated, the Kvaser U100 offers enhanced electrical protection, a vibration, shock and drop-proof housing and high-quality cabling that meets the needs of CAN system developers through to service technicians.

Kvaser U100-X1 (EAN: 73-30130-01266-0) suits rugged and higher voltage applications in marine, industrial, construction, heavy-duty, agriculture and automotive, including electric vehicle markets.

  • Supports CAN FD, up to 8 Mbit/s.
  • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
  • 20 000 msg/s, each timestamped with a resolution of 100 μs.
  • Fully compatible with J1939, CANopen, NMEA 2000® and DeviceNet.

Interface CAN/CAN FD to USB robust single-channel Kvaser U100-X3 with reinforced galvanic isolation and 16-pin OBDII plug

Model: EAN: 73-30130-01268-4

Interface CAN/CAN FD to USB Kvaser U100-X3 is a small, yet powerful, CAN to USB interface. It provides real-time transmission and reception of standard and extended CAN messages on the bus with a high timestamp precision, and is compatible with applications that use Kvaser’s CANlib.

Signal and power isolated, the Kvaser U100-X3 offers enhanced electrical protection, a vibration, shock and drop-proof housing and high-quality cabling that meets the needs of CAN system developers through to service technicians.

  • Supports CAN FD, up to 8 Mbit/s (with correct physical layer implementation).
  • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
  • 20 000 msg/s, each timestamped with a resolution of 100 μs.
  • Fully compatible with J1939, CANopen, NMEA 2000® and DeviceNet.

Interface CAN or CAN FD to USB single-channel robust Kvaser U100 with reinforced galvanic isolation

Model: EAN: 73-30130-01173-1

Interface CAN or CAN FD to USB single-channel robust Kvaser U100 with reinforced galvanic isolation offers enhanced electrical protection, a vibration, shock and drop-proof housing and high-quality cabling, that squarely addresses the needs of the evolving automotive development market.

Fully compatible with J1939, CANopen, NMEA 2000® and DeviceNet, this is the first in a new range of interfaces that is also suited to rugged applications in marine, industrial, heavy duty vehicle and heavy industries.

  • Supports CAN FD, up to 8 Mbit/s (with correct physical layer implementation).
  • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
  • Reinforced galvanic isolation, design validated with 5000 VAC rms applied for 60 s.
  • 20 000 msg/s, each timestamped with a resolution of 100 μs
  • Fully compatible with J1939, CANopen, NMEA 2000® and DeviceNet.