Leeb hardness tester NOVOTEST T-D3

Price: Liên hệ

Model T-D3
Manufacturer NOVOTEST
Power supply
Weight
Size
Condition Còn hàng
Warranty 12 tháng
Leeb hardness tester NOVOTEST T-D3 - This Leeb hardness tester is recommended for large products, weighing 5 kg and 10 mm or more in thickness. However, with certain compliances there are corrections. The product can measure even small parts.

I. Specification Leeb hardness tester NOVOTEST T-D3

Scales and materials:

  • The Leeb hardness tester NOVOTEST T-D3 comes with preliminary calibrations for different scales and materials, making it universal.
  • SCALE : HRC, HRB, HB, HV, HL, MPa.
  • MATERIAL : steel, alloy steel, cast iron, stainless steel, aluminum, copper, brass, bronze.
  • It can also be calibrated for any scale and material (USER scale).

NOVOTEST T-D3 Leeb hardness tester NOVOTEST T-D3 Leeb hardness tester NOVOTEST T-D3

Low requirements for surface quality and material structure:

  • The portable Leeb hardness tester NOVOTEST T-D3 can be used for products with poorly prepared surfaces (roughness 3.2 Ra and beyond), as well as for materials with a coarse grain structure, such as cast iron and others.
Leeb hardness tester NOVOTEST T-D3

Diversity of probes:

  • The NOVOTEST T-D3 handheld Leeb hardness tester can be used with a variety of probes depending on the test task and operating range.
Probe for NOVOTEST T-D3

II. Advantages

  • Large full-color graphic display with bright backlight
  • Various measurement modes: statistic, graph, histogram, smart, signal
  • Calibration of any scale in any range
  • Convenient and easy to measure
  • Optimized the number of buttons
  • 88 material combinations and hardness scale (calibrated)
  • Photofixation of the tested subjects
  • Extended temperature range (frost, down to - 40°C)
  • Internal memory and PC communication
  • New, intuitive menu with tips on buttons
  • Optional wireless mini printer
  • Waterproof case
  • Rubber bumper protection.

III. Standard package

Leeb hardness tester NOVOTEST T-D3
  • Hardness tester
  • Leeb probe (D type)
  • 3 pcs AA batteries
  • Charger
  • USB cable
  • Operating manual
  • Software for PC
  • Case.

IV. Optional accessories

  • Additional probes of various types of Leeb probes (D, DC, DL, C, D+15, E, G). Also, after the purchase if will be needed, user can order the additional ultrasonic (UCI) probe U1 with activation code and will get combined hardness tester with two probes (Leeb+UCI)
  • Different colors of rubber bumper protected case
  • Wireless printer
  • Batteries
  • Chargers
  • Hardness tests blocks
  • Portable grinding machine
  • Case for hardness tester
  • Set of support rings for D, DC type Leeb probes
  • Impact bodies for Leeb probes.
***You may be interested in GMGA's Ultrasonic Coating Thickness and Material Thickness Gauge: https://gmga.vn/en/danh-muc/measuring-device/thickness-measuring-equipment/

V. Specifications of Leeb hardness tester NOVOTEST T-D3

Leeb probe types

D

DC

DL

C

D+15

E

G

Measuring range for steel

HRC:20~70

HB:90~650

HV:230~940

Tensile strength, MPa: 370~1740

User calibrations for any range (for example: HV100-1600)

Measuring accuracy

HRC: 2HRC

HB: 10HB

HV: 15HV

Standards

ASTM A956

ASTM E140

Indenter

Hardened ball (Leeb)

Measuring direction

Any direction 360°
Data storage

Limited only by the memory card up to 32Gb

Communication

Upload data to PC and export as a spreadsheet (USB cable and software included )
Hardness scale

Leeb probe – HRC, HRB, HB, HV, HL, MPa

Additional custom scales for calibration

Materials

Dynamic (Leeb) pre-calibrated for steel, alloy steel, cast iron, stainless steel, aluminum, bronze, brass, copper

Additional custom materials for calibration

Data display

Angle (Leeb)

Single test result

Max, Min, Average of tests

Number of tests

Deviation

Var. coeff.

Histogram

Signal and Smart Mode (Filter of incorrect measurements)

Indication

Color LCD display (320×240)

Operating environment

Temperature:-20°C~40°C

Humidity: 30%~80%R.H.

Power supply

DC 4,5V (3 pcs batteries AA)
Instrument dimensions

160x75x30mm

Net weight

Approx. 0.3kg (Without probe)
Battery life

Approx. 10 hours.

VI. Video

  ***More hand-held durometer videos available at: Gmga Measuring Youtube.

Review Leeb hardness tester NOVOTEST T-D3

5 0% | 0 review
4 0% | 0 review
3 0% | 0 review
2 0% | 0 review
1 0% | 0 review
Review Leeb hardness tester NOVOTEST T-D3
Choose a image
0 character ( Minimum of 10)
    +

    There are no reviews yet.

    No comments yet

    SIGN UP FOR A CONSULTATION

    Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.

      COMMIT

      100% new product

      COMMIT

      100% refund if the product is of bad quality and not as promised

      24/7 SUPPORT

      Hotline: 0845 969 336

      DELIVERY

      Nationwide