Product
Categories
- Measuring Equipment
- Versatile measuring equipment
- Temperature measuring equipment
- Power gauges
- Noise meter
- Roughness measuring equiment
- Refractometer
- Viscosity meter and rheometer
- Force measuring equipment
- Magnetic field measuring equipment
- Microscope
- Roundness measuring equipment
- Contour measuring equipment
- Gas measuring equipment
- Diagonal and straight line laser
- Humidity measuring equipment
- Climate measuring equipment
- LCR meter
- Spectrophotometer
- Light meter
- Gloss measuring equipment
- Distance measuring equipment
- Airflow measuring equipment
- COD meter
- Altimeter
- Mass measuring equipment
- DO meter
- Pressure gauge
- Hardness measuring equipment
- Flow meter
- Radiation meter
- Turbidity meter
- Length measuring equipment
- Thickness measuring equipment
- Dimension measuring equipment
- Sound level meter
- Analytical Equipment
- Testing Equipment
- Comprehensive transformer testing equipment
- Air permeability tester equipment
- Weight checking equipment
- Protective equipment testing equipment
- Insulation testing equipment
- Hipot testing equipment
- Pulse coil tester
- Material flow index tester
- Friction testing equipment
- Headphone testing equipment
- Shrinkage testing equipment
- Cable and cable connector tester
- Heat seal testing equipment
- Engine test system
- Edge banding tester
- Stacking and compression testing equipment
- EV charging connection test system
- Versatile test equipment
- Vibration shaker test system
- Organic gas transmission rate test system
- Adhesion testing equipment
- Food testing equipment
- Rubbing device to test coating durability
- Seal leak tester
- Material mechanical property testing machine
- Tensile strength test equipment
- Water vapor permeability tester
- Apparatus for testing water vapor permeability by means of an electrolytic detection sensor
- Equipment for testing water vapor permeability by means of a moisture detection sensor
- Equipment for testing water vapor permeability by infrared detection sensor method
- Equipment for testing water vapor permeability by gravity method
- Air permeability tester
- Concrete testing equipment
- Maintenance Equipment
- Current source DC Bias
- Wood trunk defect testing equipment
- UV radiation equipment
- Ultrasonic weld testing equipment
- Defect detector
- Roller & Roll alignment equipment
- ESD electrostatic simulator
- Belt and pulley alignment equipment
- Surge generators and EMC measuring systems
- Bearing heater
- Concentric coaxial alignment equipment
- Dew point scanning equipment
- Sound meter calibration system
- Device for leak diagnosis and tightness test
- Metal detector
- Thermal camera
- Industrial endoscope camera
- High speed camera
- Routing system
- Rebar detector
- Vibration diagnostic equipment detects defects
- Voltage detector
- Crankshaft deflection indicator
- Gas detector
- Pipeline detector
- Vulnerability detector
- Air quality monitoring equipment
- Surface wall scanner
- Mechanical calibration equipment
- Process Equipment
- Workstation ART
- PCR thermal cycler
- Time-Lapse IVF incubator
- Biological safety cabinets
- Ultra-low temperature freezer
- Nucleic acid extraction system
- PCR cabinet
- Cell harvesting system
- Furnaces
- Bioreactors and fermenters
- Sound source
- Fog and smoke simulation system
- Special function
- Titrator
- Environmental testing room
- Humidifiers
- Stirrer
- Shaker
- Centrifuge
- Industrial Equipment
- Contactless card readers
- Humidity sensor
- Motor
- Gear reducer
- Dehumidifying device
- Air purification equipment
- Drying equipment
- Heating equipment
- Ventilation equipment
- CAN solutions
- PCAN-USB adapter
- Polynomial vehicle interface
- Guide system
- Fingerprint card
- Products
Surge generators and EMC measuring systems
Showing 1–6 of 10 results
Burst transmitter SFT 1400 125kHz Schlöder
Model: SFT 1400
The Burst SFT 1400 125kHz Schlöder transmitter simulates transient transient disturbances as defined in the IEC/EN 61000-4-4 standards. Due to the very short rise time (5ns), the individual pulses produce a wideband RF spectrum up to approximately 300 MHz. RF interference results are results.
- Boom frequency up to 125 kHz
- All parameters can be changed during testing
- DIN EN 61000-4-4, April 2013
- Single pulse to explode forever
- 5000 pulses/second. - 500 / pack
- Correct activation
- Various special functions.
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
Burst generator SFT 1420 2MHz
Model: SFT 1420
The Burst SFT 1420 2MHz generator simulates transient transient disturbances according to IEC 61000-4-4 and EN 61000-4-4 standards. These disturbances are generated by the switching inductor. The individual pulses have very short rise times in the nanosecond range and thus a wideband RF spectrum up to 300 MHz, which can cause RF interference. By increasing the pulse in the burst packet, time-critical applications can be tested alongside the very precise triggering of the SFT 1420. The Burst generator also offers a range of special functions such as " Real Burst", which simulates the natural occurrence of an explosive pulse or "Noise", where contact bouncing can be simulated. The "IFM" and "DFM" (frequency rise or fall) functions are important tools for checking resonance or saturation effects in the equipment under test.
- Boom frequency up to 2000 kHz
- RS 232 interface
- Single pulse to explode forever
- Various special functions.
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
Mutant conflict generator CWG 1500
Model: CWG 1500
The CWG 1500 Schlöder surge generator simulates high energy noise pulses and is suitable for performing EMC tests on systems and systems according to IEC 61000-4-5, 2014; DIN EN 61000-4-5, 2014 and VDE 0847-4-5. The CWG 1500 is a combined boost voltage/current generator and produces a standard surge voltage with a 1.2/50 µs curve shape and a standard surge current with an 8/20 µs curve shape when idling.
- Voltage pulse shape: 1.2 / 50µs
- Amplitude: 0.2 - 4.4 kV
- Current pulse shape: 8/20µs
- Amplitude: 0.1-2.2 kA.
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
CWG 2500 Surge Generator
Model: CWG 2500
The Surge CWG 2500 Schlöder transmitter simulates high energy noise pulses and is suitable for performing EMC tests on systems and systems according to IEC/EN 61000-4-5 and VDE 0847-4-5. It is easy to operate using a capacitive color touch screen. All parameters are clearly displayed on the screen and can be changed quickly by touch and using the digital rotary encoder.
- Operation via capacitive color touch screen
- Voltage 1.2 / 50 µs and 8/20 µs.
- Amplitude 0.2 - 4.4 kV / 0.1 - 2.2 kA
- USB, optional optical interface with LWL.
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
Immunity test generator, Induction RF CDG 7000 HF 10kHz – 400MHz
Model: CDG 7000 HF
The CDG 7000 HF, Inductive RF Immunity Test Transmitter for all immunity standards against interference is conducted by high frequency fields, including BCI tests (ISO 11452-4). One of the very few test systems incorporating IEC 61000 4-6 containing an RF signal generator, RF power amplifier, 3-channel RF voltmeter and attractively priced directional coupler. CDG 7000 generates interference as defined in IEC EN 61000-4-6 Immune to disturbances already caused by radio frequency fields.
- The compact unit consists of an RF signal generator, an RF power amplifier, a 3-channel RF voltmeter and a direction coupler.
- Signal generator frequency range 4 kHz - 1200 MHz
- RF power amplifiers are available in three versions.
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
MGA 1033 magnetic field transmitter and analyzer
Model: MGA 1033
The MGA 1033 Schlöder Magnetic Analyzer and Transmitter is a compact test system for generating and measuring magnetic fields in the frequency range from DC to 250 kHz. Thanks to the built-in high-performance amplifier, high field strengths in many military and automotive standards can be easily achieved. In combination with the three-axis Helmholtz coil MGA_HCST_50/28, a field strength of 1000 A/m can be generated in the frequency range from DC to 1 kHz. Testing is extremely convenient: thanks to the three-axis structure, fields are generated completely automatically in all three spatial axes - the test subject no longer has to rotate.
- Magnetic field tests and measurements from DC to 250 kHz
- Meets all relevant EMC, automotive and military standards
- Field strength up to 1000 A/m up to 1000 Hz
- Fully automated testing with optional three-axis Helmholtz coil.
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
