PCE-DFG NF 50K force gauge including ISO certification

I. Specification of PCE-DFG NF 50K force gauge

Force meter PCE-DFG NF 50K / With external load probe accessory / USB interface and PC software.

• The PCE-DFG NF 50K force gauge with an external load cell is designed to measure compressive forces at hard-to-reach measuring points. The load cells are connected to the dynamometer by means of a sensing cable up to 3 m in length, and with its small size it guarantees flexible measurements and applications. Gauge load cells have several threaded holes on the underside, allowing for permanent installation during force test measurement.
• The dynamometer can operate at sampling rates up to 1600 Hz. The sampled measured values ​​are displayed as instantaneous values, as well as in the graphs that are tracked directly in the dynamometer.
• Measurements can be stored in the internal memory or transmitted via the USB interface with the included software up to 800 Hz as live measurements.
• The PEAK Hold function allows the highest measured value in the dynamometer to be frozen until this value is exceeded or cleared.
• This digital force gauge offers the option of storing two limit values, which are continuously compared with the instantaneous value. When these limits are exceeded or dropped a signal is displayed in the dynamometer display, as well as feedback via external interfaces, e.g. this can be used to control the tester tra.

II. Specifications PCE-DFG NF 50K dynamometer