EMAT thickness gauge NOVOTEST UT-3M-EMA

I. Specification of EMAT thickness gauge NOVOTEST UT-3M-EMA

CONTACTLESS MEASUREMENT:

• The UT-3M-EMA magnetic thickness gauge allows users to measure product metal thicknesses with one-way access without using a connection through considerable distances (up to 6 mm). . This is the value of leveling up and the power of too responsive.

MEASUREMENT THROUGH PAINTED, OXIDIZED OR OILY SURFACES:

• EMA technology creates waves directly in materials (ferromagnetic and paramagnetic); Therefore, no metal device allows measurements to be made under the top layer or with the surface as standard; this is not possible with communication methods.

HIGH TEMPERATURE PROBES:

• EMAT thickness gauge NOVOTEST UT-3M-EMA can be first equipped for operation on streets made at 600°C; This assistive device turns out to be the best and in some cases; is the only life solution to create magpie metals.

MEASUREMENT RANGE:

• A significant advantage over the competition is the device's measurement range. The NOVOTEST UT-3M-EMA EMA Thickness Gauge allows measurements from 0.5 mm to over 200 mm; first attribute used and equipped.

THICKNESS GAUGE EXECUTION:

• The NOVOTEST UT-3M-EMA EMAT Thickness Gauge is built in a lightweight and metal housing.
• This is a premium thickness gauge that can be built to a dustproof and waterproof (IP65) design.
• The whole machine is used high capacity lithium-ion battery, long battery life allowed.

AUTOMATIC OPERATION MODE AND VARIOUS TYPES OF SIGNAL DISPLAYING:

• The NOVOTEST UT-3M-EMA EMAT thickness gauge performs a single operating mode. The device will automatically analyze the signal measurements; selection of measuring equipment method; Adjust the amount of information of the path and display the thickness gauge displayed on the screen of the device. Even an unskilled user with this mode will be able to accurately and quickly measure the thickness of various metal structures and products.

• The default signal in the device is displayed as A scan and active mode; allows the operator to evaluate the signal by different methods (PEAK-PEAK, FRONT, ECHO, ECHO-ECHO). In addition, B-scan mode is exploited in this altimeter; allows users to get product configuration such as graphics, utility for cognitive work.
• Furthermore, the NOVOTEST UT-3M-EMA EMAT Thickness Gauge comes with special softwares to work with the instrument's storage and forward the data for processing in format utilities.

II. Priority point

• The device will automatically analyze the size signal; device measurement method selected; adjust the parameters of the receiving line; and the measuring screen is displayed in large quantities on the screen. Even without automatic mode it is possible to accurately and quickly measure the thickness of various metal structures and products.
• The device actually performs B-scan mode, allowing the user to have the product profile as an easy-to-read picture.
• In cases where it is necessary to analyze product categories with clearly defined thicknesses (minimum, maximum), on which a decision on defective products is made. The operator sets the min and max ports and sees the graphical symbol on the display of the measured gauges; get warning when metal of gate and also have a heavy damage damage toxic percentage of product.
• For expert verification, measurement jobs can be performed using all known methods - using analog function (ACF), measuring between two signal maximums in the gate, flipping zero, feedback echoes through 0.

III. Standard package

• Electronic unit
• Probe
• Cable (2 Lemo 00 – 2 Lemo 00)
• Calibration block
• USB cable
• Charger
• Calibration certificate
• Operation manual
• Case.

IV. Specification sheet of EMAT thickness gauge NOVOTEST UT-3M-EMA

V. Video