Compression tensile testing machine universal PCE-UTU 10
Price: Liên hệ
| Model | PCE-UTU 10 |
| Manufacturer | PCE |
| Power supply | |
| Weight | |
| Size | |
| Condition | Còn hàng |
| Warranty | 12 tháng |
I. Specification Compression tensile testing machine universal PCE-UTU 10
PCE-UTU 10 Multi-Purpose Tester / Power Tester for Tensile Testing / Create Tension Diagrams / Various Designs / Driven DC Motor / Interrupt Identification / Variable Test Speed / Force adjustment / Omplex configurability.
- The PCE-UTU 10 Universal Compression Tensile Tester is a versatile professional force tester for performing tensile, compression and bending tests.
- Using these test methods, the PCE-UTU 10 material test stand can determine important material properties, for example elongation, yield strength or tensile strength of the specimen.
- With the PCE-UTU 10 material test stand, tensile testing with a maximum force of 10 kN is possible. These tensile tests are a standardized destructive process used in material testing. Normalized samples with a defined cross-sectional area are stretched and broken by force.
- Elongation of test piece by compression tensile testing machine universal PCE-UTU 10 without impact and with uniform force.
- In other cases, the material test stand provides the ability to determine the yield strength, tensile strength and elongation at break of tensile test pieces. Once measured, the material test stand provides detailed results, which are displayed in the software, e.g. tension diagrams.
-
- Measuring range: 0.2 ... 10 kN
- Accuracy class: 0.5
- Extensive configuration options
- Controlled DC motor
- Variable test speed
- Powder coated shell parts
- Break detection
- Maximum value memory.
II. Specifications of PCE-UTU 10 universal tensile testing device
|
Rated load |
10000 N |
| Accuracy class |
0.5 / EN 7500-1 |
|
Drive |
controlled DC motor |
| Test speed |
0.001 ... 500 mm/min, Resolution: 1 µm |
|
Distance measurement |
incremental |
| Standard stroke |
1000 mm (Without tensioning and tensioning adapters) |
|
Work-life |
450 mm |
| Supply |
230 V AC, 50 Hz |
|
Framework |
2 ground guide columns |
|
2 ball circulating spindles |
|
|
Column cover with bellows seal |
|
|
Limit switch for travel limit |
|
|
Powder coated housing parts |
|
|
Colour: RAL 7035 |
|
|
Safety devices |
Enclosure from Makrolon |
|
Safety switching contact |
|
|
Measurements |
HxWxD 1330 x 650 x 530 mm |
| Weight |
ca. 140 kg |
Force transducer for UPM |
|
|
Installed underneath the mobile traverse for compressive and tensile forces. |
|
| Measuring range |
0.2 ... 10 kN |
|
Nominal value |
2 mV/V |
| Relative characteristic deviation |
≤ ±0.1 % |
|
Relative linearity deviation |
≤ ±0.02 % |
| Relative creep error |
≤ ±0.03 % after 30 min |
|
≤ ±0.07 % after 8 h |
|
| Accuracy class |
to EN ISO 7500-1, Class 0.5 |
|
Overload |
50% |
| Protection class |
IP 67 |
|
TEDS module |
integrated, to IEEE 1451-4 |
|
automatic sensor detection |
|
Control and evaluation electronics |
|
|
Measured value acquisition |
1 kHz |
| Display |
LC-Display |
|
Interface |
RS-232 |
| Functions |
Force regulation |
|
Distance regulation |
|
|
Manual positioning |
|
|
Processing of a programmed sequence |
|
|
Specification of the crosshead speed |
|
|
Return to the starting position |
|
|
Cycles |
|
|
Presetting limits for force / distance / time |
|
|
Resetting the force / distance indicator to 0 |
|
|
Adjustable control factor |
|
|
Breaking recognition |
|
|
Maximum value memory |
|
|
For 2 force transducer: choice of the work area |
|
Intelligent measuring and control electronics |
|
|
Processor |
32 bit RISC architecture |
| Control circuit |
> 1 kHz |
|
TEDS module |
Automatic sensor detection |
|
Standard IEEE 1451-4 |
|
|
Interface |
USB 2.0 |
| A/D converter |
2 x 24 bit A/D converter for strain gauge transducers |
|
Sampling rate: > 50 kHz |
|
|
2 x 10 bit A/D converter for processing additional signals |
|
|
Sampling rate: > 50 kHz |
|
|
1 x Incremental signal input for distance / angle measurement |
|
Software |
|
|
Functions |
- Toolbox for free programming of test sequences |
|
- Toolbox for free programming of calculations |
|
|
- Freely configurable real-time graph with three axis overlay, free scaling and manual evaluation function |
|
|
- Freely configurable report format with integration of image files |
|
|
- Order and lot-bound storage or export of test sequences, calculation results and raw material data |
|
|
- Integrated user management |
|
|
- Can be automated |
|
|
- Networkable |
|
|
- Multilingual |
|
|
- Machine-bound license, multi workplace |
|
|
Basic configuration for material testing |
1 x Test template for tensile tests |
|
1 x Test template for compressive, flexural or alternating load tests |
|
|
1 x Test template for testing compression or tension springs |
|
No comments yet
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
COMMIT
100% new product
COMMIT
100% refund if the product is of bad quality and not as promised
DELIVERY
Nationwide
OTHER SAME PRODUCTS
Universal tester PCE-UTU 30
Model: PCE-UTU 30
Universal testing machine PCE-UTU 100
Model: PCE-UTU 100
Universal material testing machine PCE-UTU 50
Model: PCE-UTU 50
Digital universal material testing machine QT-6203
Model: QT-6203 Series
QT-6030D digital hydraulic testing machine
Model: QT Series
Universal material testing machine PCE-MTS500
Model: PCE-MTS500
Review Compression tensile testing machine universal PCE-UTU 10
There are no reviews yet.