Labculture ® Microbiological Safety Cabinet Class II Type B2 (full discharge)

Labculture ® Microbiological Safety Cabinet Class II Type B2 (full discharge) with filters that cannot capture chemical fumes; and would be harmful to the operator if recirculated in the laboratory space. Therefore, Class II Class B2 cabinets must be directed to an external blower for complete discharge. Similar in design to Class II Type A2 cabinets, Type B2 cabinets are suitable for work-related testing at any level of biosafety containment..

This Labculture ® Class II Type B2 Microbiological Safety Cabinet requires integration with an external blower.

I. Specification Labculture ® Class II type B2 biological safety cabinet (full discharge)

Sentinel™ Gold Microprocessor Control System:

• There are audible and visual alarms
  
• Display all safety information on one screen
  
• Centered and tilted down for easy access and viewing
  
• Selectable Quick Start mode for quick operation.

Efficient dual DC-ECM blower system:

• Powered by latest generation DC ECM motor, more efficient than legacy ECM and VFD motors
• 70% energy saving compared to AC motor
  
• Stable airflow, despite voltage fluctuations and filter loads
  
• Night setting mode to further reduce power consumption by 60%.

Filter ULPA:

• 10 x filtration efficiency compared to HEPA filter
  
• Create an ISO Class 3 workspace instead of the industry standard ISO Class 5
  
• 99.999% at 0.1 to 0.3 micron, ULPA according to IEST-RP-CC001.3 USA or >99.999% at MPPS, H14 according to EN 1822 EU.
  
• Esco cabinets use ULPA (according to IEST-RP-CC001.3) / H14 filter on EN 1822 instead of HEPA H13 filter used on many
• BSCs on the market.

Cabinet structure:

• Stainless steel side walls with side capture zones and negative pressure for optimized containment
  
• Easy access to service devices
  
• One-piece work tray, spill resistant and easy to clean.

Angled Drain Pan:

• Easy to clean
  
• Contains no contaminant.

Adjustable UV timer:

• Easily adjust to desired minutes or hours
  
• Extend the using time of the UV lamp, if not turn ON the lamp overnight.

ISOCIDE™ Coating:

• Silver ion impregnated powder coat
  
• Inhibits microbial growth for improved safety.

Labculture ® Class II Type B2 Cabinet Filtration System:

• Ambient air is pulled through the front grille to create an inlet without entering the work surface. The inlet is joined by a downward half, to create a front air curtain that is fine-tuned to create a large performance envelope. The combined airflow passes through the rear air column towards the blower.
  
• About ⅓ of the air in the common room is expelled through the ULPA filter into the room. ⅔ remaining air is passed through the downflow ULPA filter and into the work area as vertical laminar flow air to create an ISO Class 3 work surface and prevent cross contamination.
  
• Near the work surface, the downflow separates. About half belongs to the front grille and half belongs to the rear grille. A small portion goes into the side snap areas to prevent dead air angles (small blue arrows)
  
• Optimized design for great performance, providing operator and product protection at wide Inflow and Downflow variations from Nominal point.

Isocide ™ Antibacterial Powder Coating:

• Removes 99.9% of bacteria on surfaces within 24 hours of contact.

II. Advantages of Labculture ® Microbiological Safety Cabinet Class II Type B2

• Labculture ® Class II Microbiological Safety Cabinets Type B2 (full flush) with latest generation DC ECM motor made in the USA.
  
• The negative pressure overflow spans the contaminated positive pressure overflow. Do not use cloth bags.
  
• Long life ULPA filter for feed and discharge (according to IEST-RP-CC001.3) with 99.999% efficiency for 0.1 to 0.3 micron particle sizes
  
• Covered one-piece work surface containing spillage. The absence of screws or connectors in the work area facilitates easy cleaning and decontamination.
  
• One-piece back wall with cove corners to ensure thorough cleaning and decontamination
  
• Power supply filter is angled to match cabinet configuration for best downflow uniformity
  
• Esco Sentinel TM Gold processor with large blue LCD display all safety parameters simultaneously on a single screen.
  
• Quick start mode, to turn on/off the blower and lights by moving the window pane to the correct position.
  
• The RS 232 data output port allows remote monitoring of the cabinet's operating parameters.
  
• Frameless shields are easier to clean.
  
• The angled front panel improves reach and comfort.
  
• The screen tilts down and the panel is ADA compliant.
  
• The raised grille helps maintain safety by preventing blockages.
  
• Esco ISOCIDE TM anti-bacterial coating on all painted surfaces helps to reduce contamination.
  
• Advanced side-captured areas optimize containment.

***For more detailed technical information, as well as to select the appropriate Labculture ® Microbiological Safety Cabinet Class II Class B2 model; Please Contact GMGA . Our professional technicians are always ready to assist you 24/7.

III. Specifications Labculture ® Microbiological Safety Cabinet Class II Type B2

Model LB2 Biological Safety Cabinet Engineering Drawing:

IV. Accessories for Labculture ® Class II Biological Safety Cabinets LA2, LB2 and LR2

***Watch videos of Class I, Class II, Class III biological safety cabinets at: Gmga Measuring Youtube.