Tensile - compression and bending testing machine of materials PCE-UTU 2
Price: Liên hệ
Model | PCE-UTU 2 |
Manufacturer | PCE |
Power supply | |
Weight | |
Size | |
Condition | Còn hàng |
Warranty | 12 tháng |
I. Specification of tensile - compression and bending testing machine of materials PCE-UTU 2
PCE-UTU 2 Universal Testing Machine / Power Tester for Tensile Testing / Create Tension Diagrams / Various Designs / Driven DC Motor / Interrupt Identification / Variable Test Speed / Force adjustment / Omplex configurability
- PCE-UTU 2 Material Tensile, Compression and Bending Tester is a professional force tester to perform tensile, compression and bending tests.
- Using these test methods, the PCE-UTU 2 material test stand can determine important material properties, for example elongation, yield strength or tensile strength of the specimen.
- With the PCE-UTU 2 material test stand, tensile tests with a maximum force of up to 2 kN. These tensile tests are a standardized destructive process used in material testing.
- Normalized samples with a defined cross-sectional area are stretched and broken by force. The elongation of the test piece is equal to the impact-free material test stand and to a uniform force.
- In other test cases, this tensile - compression and bending testing machine of materials PCE-UTU 2, compressive and flexural strength tester provides the ability to determine yield strength, tensile strength and elongation at break of tensile test pieces . Once measured, the material test stand provides detailed results, which are displayed in the software, e.g. tension diagrams.
-
- Measuring range: 0.04 ... 2 kN
- Accuracy class: 0.5
- Extensive configuration options
- Controlled DC motor
- Variable test speed
- Powder coated shell parts
- Break detection
- Maximum value memory.
II. Specifications of PCE-UTU 2 material tensile, compression and flexural testing machine
Rated load |
2000 N |
Accuracy class |
0.5 / EN 7500-1 |
Drive |
controlled DC motor |
Test speed |
0.001 ... 500 mm/min, Resolution: 1 µm |
Distance measurement |
incremental |
Standard stroke |
1000 mm (Without tensioning and tensioning adapters) |
Work-life |
450 mm |
Supply |
230 V AC, 50 Hz |
Framework |
2 ground guide columns |
2 ball circulating spindles |
|
Column cover with bellows seal |
|
Limit switch for travel limit |
|
Powder coated housing parts |
|
Colour: RAL 7035 |
|
Safety devices |
Enclosure from Makrolon |
Safety switching contact |
|
Measurements |
HxWxD 1330 x 650 x 530 mm |
Weight |
ca. 140 kg |
Force transducer for UPM |
|
Installed underneath the mobile traverse for compressive and tensile forces. |
|
Measuring range |
0.04 ... 2 kN |
Nominal value |
2 mV/V |
Relative characteristic deviation |
≤ ±0.1 % |
Relative linearity deviation |
≤ ±0.02 % |
Relative creep error |
≤ ±0.03 % after 30 min |
≤ ±0.07 % after 8 h |
|
Accuracy class |
to EN ISO 7500-1, Class 0.5 |
Overload |
50% |
Protection class |
IP 67 |
TEDS module |
integrated, to IEEE 1451-4 |
automatic sensor detection |
|
Control and evaluation electronics |
|
Measured value acquisition |
1 kHz |
Display |
LC-Display |
Interface |
RS-232 |
Functions |
Force regulation |
Distance regulation |
|
Manual positioning |
|
Processing of a programmed sequence |
|
Specification of the crosshead speed |
|
Return to the starting position |
|
Cycles |
|
Presetting limits for force / distance / time |
|
Resetting the force / distance indicator to 0 |
|
Adjustable control factor |
|
Breaking recognition |
|
Maximum value memory |
|
For 2 force transducer: choice of the work area |
|
Intelligent measuring and control electronics |
|
Processor |
32 bit RISC architecture |
Control circuit |
> 1 kHz |
TEDS module |
Automatic sensor detection |
Standard IEEE 1451-4 |
|
Interface |
USB 2.0 |
A/D converter |
2 x 24 bit A/D converter for strain gauge transducers |
Sampling rate: > 50 kHz |
|
2 x 10 bit A/D converter for processing additional signals |
|
Sampling rate: > 50 kHz |
|
1 x Incremental signal input for distance / angle measurement |
|
Software |
|
Functions |
- Toolbox for free programming of test sequences |
- Toolbox for free programming of calculations |
|
- Freely configurable real-time graph with three axis overlay, free scaling and manual evaluation function |
|
- Freely configurable report format with integration of image files |
No comments yet
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
COMMIT
100% new product
COMMIT
100% refund if the product is of bad quality and not as promised
24/7 SUPPORT
Hotline: 0845 969 336
DELIVERY
Nationwide
Review Tensile – compression and bending testing machine of materials PCE-UTU 2
There are no reviews yet.