UCI hardness tester PCE-3500 with ISO certificate

Price: Liên hệ

Model	PCE-3500
Manufacturer	PCE
Power supply
Weight
Size
Condition	Còn hàng
Warranty	12 tháng

Details description
Specifications
Video
Download document
Accessory

I. Specification of UCI hardness tester PCE-3500

UCI hardness tester PCE-3500 for non-destructive hardness measurement / Large screen with color LC display / Software included / Scales HV, HRC, HRB, HB and MPa / With memory function / Probe with Interchangeable / Vickers Diamond 136°.

UCI hardness tester PCE-3500 with ISO certificate

UCI hardness tester works on the basis of ultrasonic contact impedance testing process. This UCI procedure works like this: a Vickers diamond at the probe is excited with its self-resonant ability. By pushing the transducer, the vibration frequency is reduced depending on the hardness of the surface and on the modulus e of the material and contact surface. The hardness of the surface can be determined based on the frequency change, considering the characteristic curve of the material.
The UCI hardness tester works non-destructively. There is a microscopic microscopic pressure on the surface, however it is usually not visible. Due to the low penetration depth of Vickers diamonds, this UCI hardness tester is particularly suitable for edge-hardened components, for example those that emerge upon nitriding or induction hardening. It is commonly used for punching tools, presses, thin-walled components, gears, turbine blades, camshafts or weld seams. The UCI hardness tester is also suitable for many other hardness testing applications. It has exchangeable transducers with different pressures and thus can cover different applications.
After measuring the hardness of a component, the UCI PCE-3500 hardness tester displays various statistical values such as the MAX/MIN value and the average value. Furthermore, the standard deviation and further coefficients can be determined. A bar chart can be specified. Since the UCI hardness tester is equipped with internal memory, the measured data can be evaluated by software.

II. Advantages

Measure according to the UCI . procedure
Test HRC, HRB, HV, HB, MPa
Measuring direction 360°
Large color LC display
Memory function via SD card
Various probes can be mounted
Pre-calibrated material characteristic curve
Can be assessed through software.

PCE-3500 UCI hardness tester PCE-3500 with ISO certificate

***You may be interested in the GMGA Ultrasonic Thickness Gauge: https://gmga.vn/en/danh-muc/measuring-device/thickness-measuring-equipment/

III. Specifications of UCI hardness tester PCE-3500 with ISO certificate

Technical specifications on the UCI hardness tester PCE-3500
Measurement range	230 ... 940 HV
	20 ... 70 HRC
	90 ... 650 HB
	370 ... 1740 MPa
Accuracy	+/- 3% HV
	+/- 1.5 HRC
	+/- 3% HB
Probes	50 N UCI probe (10 N UCI probe optional)
Hardness scales	HRC, HB, HV, HRB, HL, MPA
Materials	UCI: steel (ferromagnetic)
Reference block	136° Vickers diamond
Measurement direction	360°
Minimum material thickness	1 mm / .04 in (with UCI probe only)
Display	graphical colour LCD with backlight
Functions	Single measurement, MIN / MAX / average value, number of measurements, mean value, standard deviation, variation coefficient, bar chart, Smart Mode (filters outliers)
Memory	SD card
Interface	USB
Operating conditions	-20 ... 40°C / -4 ... 104°F ; 30 ... 80 % RH
Power supply	6V (3 x AA batteries)
Battery life	Approx. 10 hours
Dimensions	160 x 75 x 30 mm / 6.3 x 3 x 1.2 in
Protection class	IP 54
Weight	300 g / < 1 lb (without probe)