UCI hardness tester PCE-5000

Price: Liên hệ

Model PCE-5000
Manufacturer PCE
Power supply
Weight
Size
Condition Còn hàng
Warranty 12 tháng

I. Specification of UCI hardness tester PCE-5000

Hardness Tester - Handheld Hardness Meter PCE-5000 UCI Uses ASTM A1038 Ultrasonic Contact Impedance (UCI) method to test the hardness of metals and alloys.

UCI hardness tester PCE-5000
  • The PCE-5000 Gauge is a handheld hardness tester that uses ASTM A1038's ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 print.
  • The ultrasonic hardness test of PCE-5000 is considered non-destructive, as it creates a microscopic indentation that can only be seen when using a high-powered microscope.
  • With a fast measurement time of just 2 seconds, this UCI hardness tester is the ideal tool for testing welds, controlling the hardness of metal coatings and measuring the hardness of fine grained metals and small forgings. , casting materials, heat-affected zones, die ion stamping and dies, forms, presses, thin-walled structures and parts, bearings, tooth flanks, tubes, tanks, steel plates and products have a complex or complex shape.
  • The additional measuring sensors of this versatile durometer can be directly connected to the ultrasonic tester, they vary in test force and are applicable to durometer hardness testing requirements. difference.
  • Different sensors measure the hardness of objects depending on the roughness of their surface. For example, a standard sensor with 20 N measures surfaces with a roughness less than 5 µm. The 10 N sensor measures roughness less than 3.2 m and the 98 N sensor measures roughness less than 15 m.

II. Advantages

  • Hardness measurement of metals and alloys with a minimum thickness of 2 mm
  • Displays measurements in Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
  • Measuring range: 61 … 85.6 HRA, 41 … 100 HRB, 20.3 … 68 HRC, 85 … 650 HB, 50 … 999 HV, 255 … 2180 MPa (N/mm²)
  • Accuracy: ±1.5 HR, ±3% HB, ±3% HV
  • Store up to 2000 measurement groups / 20 calibrators in memory
  • Provides measurements in just 2 seconds
  • The probe fits into small spaces and hard to reach places
  • Features large and easy-to-access LCD readout, simple calibration and RS-232 interface.

Hardness Testing Machines UCI hardness tester PCE-5000 Hardness Testing Machines

III. Standard package

UCI hardness tester PCE-5000
  • 1 x PCE-5000 UCI hardness tester with 1 x 4.2V battery
  • 1 x 20 N probe (standard)
  • 1 x Protective cap for probe (silicon)
  • 1 x Probe cable
  • 1 x USB cable
  • 1 x USB charger
  • 1 x RS-232 interface cable
  • 1 x Screwdriver
  • 1 x Vibration-resistant carrying case
  • 1 x User manual
***You may be interested in GMGA ultrasonic flaw detector: https://gmga.vn/en/danh-muc/maintenance-equipment/defect-detector/

IV. Specifications of UCI hardness tester PCE-5000

Measuring range

Rockwell A B C

61 … 85.6 HRA, 41 … 100 HRB, 20.3 … 68 HRC

Brinell

85 … 650 HB
Vickers

50 … 999 HV

Tensile strength

255 … 2180 N/mm²

Accuracy

Rockwell

± 1.5 HR
Brinell

± 3% HB

Vickers

± 3% HV

General specifications

Measurement method

Ultrasonic contact impedance (UCI) per ASTM A1038
Direction of measurement

360°

Measurement time

2 seconds
Hardness units

HRA, HRB, HRC, HB, HV, MPa

Display

LCD with backlight
Minimum material thickness    

2 mm

Data memory

Up to 2000 measurement groups

Up to 20 calibration sets

Measurement probe

20 N (standard)
Probe cable length

1.5 m / .06 in

Functions

Single value, min / max, average value
Power supply

4.2V rechargeable battery, 4800-mAh

Battery life

Approx. 10 hrs of operation at full charge (without backlight)
Dimensions

162 x 81 x 31 mm / 6.38 x 3.19 x 1.22 in

Operating conditions

-10 ... 40°C / 14 ... 104°F, ≤ 85% RH
Storage conditions

-20 ... 60°C / -4 ... 140°F, ≤ 85% RH

Weight

Approx. 755 g / 1.67 lb (including probe)

  ***Video of handheld ultrasonic hardness tester is available at: Gmga Measuring Youtube.

Review UCI hardness tester PCE-5000

5 0% | 0 review
4 0% | 0 review
3 0% | 0 review
2 0% | 0 review
1 0% | 0 review
Review UCI hardness tester PCE-5000
Choose a image
0 character ( Minimum of 10)
    +

    There are no reviews yet.

    No comments yet

    SIGN UP FOR A CONSULTATION

    Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.

      COMMIT

      100% new product

      COMMIT

      100% refund if the product is of bad quality and not as promised

      24/7 SUPPORT

      Hotline: 0845 969 336

      DELIVERY

      Nationwide

      OTHER SAME PRODUCTS