Electronic coating thickness gauge NOVOTEST TP-1M

I. Specification of coating thickness gauge NOVOTEST TP-1M

NOVOTEST TP-1M - Electronic measurement on steel:

• The most common task is successfully solved by the device due to the thickness NOVOTEST TP-1M.
• Typically, coating measurements in the 0 to 500 μm range require high accuracy; The NOVOTEST TP-1M coating thickness gauge with an F-0.5 probe is ideal. Alternatively, to measure coating thickness on products with a small radius, or in grooves, the user can use the dedicated probe F-0.3.

NOVOTEST TP-1M - Electronic coating thickness measurement on non-ferrous metals:

• To measure the coating thickness on non-ferrous metals, NOVOTEST TP-1M with NF-2 probe is used, which allows coating measurement in the range of 0 to 2 mm.
• Calibration of the NF-2 probe is made simple with aluminum, if coatings are measured on materials whose properties are significantly different from those of aluminum, the NOVOTEST TP-1M coating thickness ultrasound machine can probe self-calibration.

NOVOTEST TP-1M - Electronic coating strength measurement on steel:

• For measuring coatings of paints, polymers and other dielectric coatings up to 5 mm; probes F-2 and F-5 are suitable, providing test ranges of up to 2 or 5 mm, respectively.
• As with any measuring instrument: the wider the range, the higher the error, so when choosing a probe it is important to be guided by this principle to choose the best option.

NOVOTEST TP-1M - Electronic coating thickness measurement up to 60 mm (60 000 μm):

• For measuring very thick coatings on any metal (steel or non-ferrous) - probes M-12, M-30 and M-60 are used on the NOVOTEST TP-1M coating thickness gauge; it offers measuring ranges up to 12, 30 and 60 mm, respectively.
• Be it bituminous insulation, coatings of polymeric tapes or some specific task of primary thickness measurement of materials, where ultrasonic waves cannot be used due to large attenuation in the material. whether heterogeneous or multi-layered.

NOVOTEST TP-1M - Application measurement range:

• The NOVOTEST TP-1M coating thickness gauge measures the depth and roughness of the groove. The DSH probe allows assessment of roughness, measurement of depth of corrosion, surface and groove defects. To determine the roughness, it is necessary to take a series of measurements on the surface of a small area, and then use the formula to calculate the desired value.
• Measuring temperature, humidity and dew point - Using DTVR probe, NOVOTEST TP-1M can measure humidity and air temperature, based on which the device calculates dew point, which is very important to know before painting background paint.
• Surface Temperature Measurement - NOVOTEST TP-1M uses DT probe to measure surface temperature by contact method.

NOVOTEST TP-1M - Ergonomic Design:

• The NOVOTEST TP-1M Electronic Thickness Gauge is housed in an ergonomic housing, equipped with a silicone housing, which makes the electronics of the device impact resistant.
• In addition, this gauge is resistant to extreme temperatures, and can be used at temperatures from -20 to +40 °C..

Advantages of portable electronic coating thickness machine NOVOTEST TP-1M:

• Large thickness measuring range
• Convenient and easy to use
• Shock resistance
• Minimum number of controls: one button - one function
• Backlit graphic display
• Auto detect probe
• Connected probe type indicator
• Battery control.

II. Specifications of NOVOTEST TP-1M electronic coating thickness gauge

Specifications of probes for Coating Thickness Gauge NOVOTEST TP-1M:

III. Standard electronic coating thickness gauge NOVOTEST TP-1M

• NOVOTEST TP-1M . electronic coating thickness gauge
• Probe
• Reference thickness samples
• 2 Batteries (AA)
• Charger
• Operating manual
• Shipping Box

IV. Video