UCI hardness tester PCE-5000

I. Specification of UCI hardness tester PCE-5000

Hardness Tester - Handheld Hardness Meter PCE-5000 UCI Uses ASTM A1038 Ultrasonic Contact Impedance (UCI) method to test the hardness of metals and alloys.

• The PCE-5000 Gauge is a handheld hardness tester that uses ASTM A1038's ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 print.
• The ultrasonic hardness test of PCE-5000 is considered non-destructive, as it creates a microscopic indentation that can only be seen when using a high-powered microscope.
• With a fast measurement time of just 2 seconds, this UCI hardness tester is the ideal tool for testing welds, controlling the hardness of metal coatings and measuring the hardness of fine grained metals and small forgings. , casting materials, heat-affected zones, die ion stamping and dies, forms, presses, thin-walled structures and parts, bearings, tooth flanks, tubes, tanks, steel plates and products have a complex or complex shape.
• The additional measuring sensors of this versatile durometer can be directly connected to the ultrasonic tester, they vary in test force and are applicable to durometer hardness testing requirements. difference.
• Different sensors measure the hardness of objects depending on the roughness of their surface. For example, a standard sensor with 20 N measures surfaces with a roughness less than 5 µm. The 10 N sensor measures roughness less than 3.2 m and the 98 N sensor measures roughness less than 15 m.

II. Advantages

• Hardness measurement of metals and alloys with a minimum thickness of 2 mm
• Displays measurements in Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
• Measuring range: 61 … 85.6 HRA, 41 … 100 HRB, 20.3 … 68 HRC, 85 … 650 HB, 50 … 999 HV, 255 … 2180 MPa (N/mm²)
• Accuracy: ±1.5 HR, ±3% HB, ±3% HV
• Store up to 2000 measurement groups / 20 calibrators in memory
• Provides measurements in just 2 seconds
• The probe fits into small spaces and hard to reach places
• Features large and easy-to-access LCD readout, simple calibration and RS-232 interface.

III. Standard package

• 1 x PCE-5000 UCI hardness tester with 1 x 4.2V battery
• 1 x 20 N probe (standard)
• 1 x Protective cap for probe (silicon)
• 1 x Probe cable
• 1 x USB cable
• 1 x USB charger
• 1 x RS-232 interface cable
• 1 x Screwdriver
• 1 x Vibration-resistant carrying case
• 1 x User manual

IV. Specifications of UCI hardness tester PCE-5000