ESD electrostatic simulator gun SESD 216 16.5kV
Price: Liên hệ
Model | SESD 216 |
Manufacturer | Schlöder GmbH |
Power supply | |
Weight | |
Size | |
Condition | Còn hàng |
Warranty | 12 tháng |
I. Specification of ESD electrostatic simulator gun SESD 216 16.5kV
- The ESD SESD 216 Electrostatic Simulator is suitable for performing EMC tests on systems and systems according to IEC/EN 61000-4-2 (ESD testing).
- Higher test levels can be set beyond standard limits. Depending on the test object and test setup, two test methods will be used: air discharge (AIR) and contact discharge (CON).
- Contact control: ESD SESD 216 16.5kV Schlöder electrostatic simulator gun with "contact control". With the "CON" test method, the test head touches the surface of the test object. If there is no contact, the pulse is not triggered. The display shows "No contact". This ensures that a true discharge takes place when the contact is discharged.
- Always ready to use: SESD 216 ESD emulator works with Battery. If the Battery is exhausted, it can be charged immediately with the charger included in the range of distribution without the need to change the Battery. The in-display charging bar indicates the charging status.
-
- 2 test methods applicable: exhaust or contact
- Higher test levels can be set beyond standard limits.
- Displays actual discharge voltage during exhausting
- Automated programming test process
- Large display with easy-to-read digits
- Works with Battery and mains.
II. Standard package
- ESD SESD 216 Generator
- Charger with connection cable
- Exhaust probe (SESD 3020)
- Contact discharge test probe (SESD 3021)
- Strap (SESD 231)
- Operating manual.
III. Specifications of ESD electrostatic simulator gun SESD 216 16.5kV
Output voltage |
Adjustable via encoder |
Operating mode |
Air discharge and |
Contact discharge |
|
Air discharge |
± 0.2 kV to ± 16.5 kV, 100 V steps |
Contact discharge |
± 0.2 kV to ± 10.0 kV, 100 V steps |
Polarity |
Positive and negative |
Special function |
In counter operation, either polarity changeover after half the set pulses |
Repetition rate |
|
Air discharge |
Single pulse or repetitive (Frequency depends on the distance of the discharge electrode / test object) |
Contact discharge |
Single pulse, 0.1 Hz, 0.2 Hz, 1 Hz, 2 Hz, 5 Hz, 10 Hz, 20 Hz. |
Continuous operation |
Possible with air discharge and contact discharge |
Holding time |
≥ 5 sec |
Preset counter |
1 - 9999 |
Discharge electrodes |
According to IEC / EN 61000-4-2 |
Impact capacity |
150 pF ± 10% |
Discharge resistance |
330 ohm ± 5% |
Self-test |
In 14 steps, can be activated via interface |
Working temperature |
0 - 40 ° Celsius |
Relative humidity |
0 - 60% |
Weight approx . |
1260 g |
IV. Video
***See more videos of ESD electrostatic gun at: Gmga Measuring Youtube.No comments yet
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
COMMIT
100% new product
COMMIT
100% refund if the product is of bad quality and not as promised
24/7 SUPPORT
Hotline: 0845 969 336
DELIVERY
Nationwide
Review ESD electrostatic simulator gun SESD 216 16.5kV
There are no reviews yet.