Hand-held combined hardness tester NOVOTEST T-UD2

I. Specification of Hand-held combined hardness tester NOVOTEST T-UD2

Calculation of presets for materials and scales:

• Using the dynamic probe (Leeb), it is possible to measure materials varying from their properties to steel without additional calibration. Because by default, this NOVOTEST T-UD2 ultrasonic and impact type durometer has built-in calibration for different materials for the major hardness scales.

Measure products with superior rough and rough materials:

• The dynamic measurement method is less demanding on material uniformity and surface roughness, allowing the user to measure the hardness of a wide range of alloys, as well as to test products without the need to prepare the surface of the area. test area.

Measure products with thin thickness:

• Using the Ultrasonic Contact Impedance (UCI) method, the NOVOTEST T-UD2 handheld combined durometer can measure products with a wall thickness of only 1 mm or even thinner when using a UCI probe NOVOTEST.

Measure even small products:

• The UCI probe allows products from 100g to be measured with no additional work, and even less when using special equipment.

Product measurement with different surface platforms:

• Due to the small contact measurement area, with the ultrasonic probe (UCI) the user can measure the hardness of the product in the groove, gear teeth and use the special nozzle to be able to accurately measure the hardness of the surface. radius and even stiffness of the wire.

The mark is almost invisible when testing the hardness:

• The ultrasonic transducer (UCI) has a mark that is almost invisible to the naked eye, in order to minimize the destructive consequences the instrument can be equipped with a special transducer with a reduced force (10N), which makes the measurement unbiased. as destructive as possible.

Shockproof and reliable protection:

• The durometer has a protective silicone case, which protects against shock and prevents damage to the device after a drop. In addition, the device can withstand extreme operating conditions (temperature range from -20 to +40 C°).

Special software:

• The NOVOTEST T-UD2 Handheld Combined Hardness Tester has special software to get the data on a PC for further processing.

II. Advantages

• Two detachable probes: ultrasonic contact impedance (UCI) and dynamic, rebound (Leeb)
• There are almost no restrictions on hardness testing (by weight, configuration, construction, degree of mechanical and heat treatment, etc.)
• To evaluate the hardness change of the hard layer depth articles and the effect of surface stress
• Wide range of hardness values
• Convenient and easy in operation
• Graphic contrast display with backlight
• Auto detect probe
• Extended temperature range (cold-resistant, down to -20°C)
• The device has internal memory and allows the user to transfer data to a PC.

III. Standard package

• Hardness tester
• UCI probe (10N, 50N or 98N for choice)
• Leeb probe (D type)
• 2pcs AA batteries
• Charger
• USB cable
• Operating manual
• Software for PC
• Case.

IV. Optional accessories

• Additional UCI and Leeb probes any type
• Batteries
• Charger
• Hardness test blocks
• Portable grinding machine
• Case for hardness tester
• Set of support rings for D, DC type Leeb probes
• Impact bodies for Leeb probes

V. Specifications of Hand-held combined hardness tester NOVOTEST T-UD2

VI. Video

Probe Calibration: