Immunity test generator, Induction RF CDG 7000 HF 10kHz – 400MHz

Price: Liên hệ

Model	CDG 7000 HF
Manufacturer	Schlöder GmbH
Power supply
Weight
Size
Condition	Còn hàng
Warranty	12 tháng

Details description
Specifications
Video
Download document
Accessory

I. Specification of CDG 7000 HF high frequency anti-interference tester

Immunity test generator, Induction RF CDG 7000 HF 10kHz – 400MHz is a new test generator for all immunity standards to disturbances caused by high frequency fields - including BCI tests (ISO 11452-4).
One of the very few IEC 61000-4-6 combo test systems that contains an RF signal generator, RF power amplifier, 3-channel RF voltmeter and directional coupler at a very affordable price.
The CDG 7000 HF Inductive RF, Immunity Test Transmitter generates interference according to IEC/EN 61000-4-6 - immune to conductive interference caused by high frequency fields. The standard describes a test setup in which these high frequency disturbances can be affected on a test item without the need for complex setups with antennas, field equipment and shielded rooms. The use of coupling networks and coupling clamps generates sine waves directly in the power and signal lines. The device under test remains in its original position in the device structure, so that the overall functionality of the system can be tested..

II. Advantages of Immunity test generator, Induction RF CDG 7000 HF 10kHz – 400MHz

This compact high frequency anti-interference tester consists of an RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a direction coupler.
Frequency range (signal generator) 4 kHz - 1200 MHz
RF power amplifiers are available in three different versions
The supplied application software (HELIA 7 - Basic) enables extensive reporting functions and EUT monitoring, (HELIA 7 - BCI required for BCI tests)
Easily expandable with external amplifier via 2nd transmitter output
The SCPI command set allows for easy integration into your own software systems
Interfaces: USB , LAN , GPIB (optional)
Temperature measurement input, e.g. for BCI . stapling temperature monitoring and display
External pulse modulation input
Configuration, user connection 8 digital channels.

***See more of Gmga's surge detectors and EMC measurement systems at: https://gmga.vn/danh-muc/thiet-bi-bao-tri/thiet-bi-phat-dien-dot-bien-va-he-thong-do-emc/

III. Models of CDG 7000 HF

CDG 7000-25: Wired RF transmitter, according to IEC 61000-4-6100 kHz - 250 MHz, amplifier 25W Maximum test level: 10 V (15 V) with 80% AM (6 dB without) Directional coupler integration direction, with HELIA 7 software - basic USB, LAN.
CDG 7000-75: Wired RF transmitter, according to IEC 61000-4-6100 kHz - 400 MHz, amplifier 75W Maximum test level: 30 V (40 V) with 80% AM (6 dB without) Directional coupler integration direction with HELIA 7 - Basic software USB, LAN.
CDG 7000-75-10: Wired RF transmitter, according to IEC 61000-4-6 10kHz - 250MHz, amplifier 75W Maximum test level: 30 V (40 V) with 80% AM (6 dB without) Directional coupler integration with HELIA 7 software - basic USB, LAN.

IV. Specifications of Immunity test generator, Induction RF CDG 7000 HF 10kHz – 400MHz

RF power amplifier
	25 W	75 W	75 W / 10k
Frequency range	100 kHz-250 MHz	100 kHz-400 MHz	10 kHz-250 MHz
Output power:
Nominal	25 W	75 W	75 W
Linear @ 1dB compression	20 W	50 W	50 W
Gain	46 dB nominal	51 dB nominal	51 dB nominal
Flatness	± 1.5 dB max.	± 1.5 dB max.	± 1.5 dB max.
Input power for nominal power	1 mW / 0 dBm	1 mW / 0 dBm	1 mW / 0 dBm
Input / output impedance	50 Ω	50 Ω	50 Ω
Input VSWR	1.5 : 1 max.	1.5 : 1 max.	1.5 : 1 max.
Harmonic distortion	< -20 dBc @ 20 W	< -20 dBc @ 50 W	< -20 dBc @ 50 W
Noise	typ. 5 dB	typ. 7 dB	typ. 7 dB
Spurious	< -75 dBc to 10 W	< -75 dBc to 10 W	< -75 dBc to 10 W

RF Generator
Two switchable outputs	2 x SMA ( only one can be used at a time )
Frequency range	9 kHz to 1.2 GHz ( usable ab 4 kHz)
Frequenzauflösung	1 Hz
Output level range	0 to -63 dBm
Output level resolution	0.1 dB
Harmonics	< 30 dBc
Spurious	< 45 dBc
Amplitudenmodulation (intern)	0 bis 100%, Auflösung 1%
Amplitudenmodulation (extern)	0 to 100% , max. Amplitude 1V = 100%, BNC Rifle
Heart rate modulation (internal)	5 - 95%, resolution 1%
Pulse modulation (external)	DC…1 MHz, 3,3/5V CMOS/TTL, BNC Buchse

LF Generator (Modulation)
Connection	BNC Buchse
Frequency range	1 Hz to 100 kHz
Frequenzauflösung	0.1 Hz
Signal	Sine wave / rectangle signal / triangular
Amplitude	0...1 V
RF Voltmeter (Testlevel)
Connection	BNC Buchse
Frequency range	9 kHz to 1.2 GHz (verwendbar ab 4 kHz)
Measuring range	-40 to +30 dBm
RF voltmeter 2 + 3 (forward / reverse power)
Connection	2 x SMA
Frequency range	9 kHz bis 1.2 GHz (verwendbar ab 4 kHz)
Measuring range	-40 bis + 33 dBm + Richtungskoppler (typ. 40 dB)