LCR meter MICROTEST 6360 Series (10Hz ~ 1MHz)

LCR meter MICROTEST 6360 Series (10Hz ~ 1MHz) from manufacturer MICROTEST can display four sets of parameters simultaneously on its user-friendly interface, making it an excellent choice for quality assurance and incoming material inspection.

I. Specifications LCR tester MICROTEST 6360 Series

• LCR meter MICROTEST 6360 Series provides precise and fundamental measurement functions with test frequencies of 20k/100k/200k/500k/1MHz. MICROTEST 6360 can measure parameters such as |Z| (impedance), |Y| (admittance), θ (phase angle), X (reactance), R (series/parallel resistance), G (conductance), B (susceptance), L (inductance), D (dissipation factor), Q (quality factor), DCR (DC resistance), and C (capacitance).
• LCR gauges MICROTEST 6360 supports communication interfaces such as RS-232, Handler, LAN, USB Host, GPIB, and can store test results and data via USB.
• With the optional PC connection software, MICROTEST 6360 also enables sweep analysis capabilities. It is an excellent choice for basic impedance measurements of electronic components.

Features of MICROTEST 6360:

• Test frequency DC: 10Hz-20k/100k/200k/500k/1MHz
• Basic accuracy up to: ±0.05%
• Low frequency 6365A (DC, 0.1Hz-200kHz) can measuring aluminum electrolytic capacitors
• Synchronous tests with four parameter settings
• Multi-step function up to 8 sets
• USB Host can storage testing screen and data
• Support RS-232, GPIB, Handler, LAN, USB Host interfaces
• Using in production line, quality assurance or incoming quality control or automated testing department.

Applications:

• Passive Components: Resistance, Capacitance, Inductance, Oscillators,
• Sensors, Delay Line, Filters, Resonators
• Acoustic components: Speaker voice coil, headphone voice coil.

II. Key Features of LCR meter MICROTEST 6360 Series (10Hz ~ 1MHz)

PC link Software Sweeping Analysis (option):

• Connect 636x series RS-232, GPIB or Handler to computer and using sweeping analysis.

Multi-Step Test Mode:

• Multi-step function up to 8 sets.

Measuring inductance:

• Test Frequency 10Hz- 1MHz, the key parameters for inductance are Ls/Q/θ/Rs.

Display and connectivity:

• 7.0”TFT, 800×480 color screen, and four parameters can displayed simultaneously.
• USB Host can storage testing screen and data.

III. Model of LCR tester MICROTEST 6360 Series

Technical specifications of LCR meter MICROTEST 6360 Series (10Hz ~ 1MHz)

Measurement parameters:

System: