Precision LCR meter MICROTEST 6630 Series (10Hz ~ 50MHz)

With a measurement speed of up to 3mS, Precision LCR meter MICROTEST 6630 Series (10Hz ~ 50MHz) from manufacturer MICROTEST is an excellent choice for automated inductor testing.

I. Specification of LCR gauges MICROTEST 6630 Series

• Precision LCR meter MICROTEST 6630 Series (10Hz ~ 50MHz) provides a wide frequency range of 10Hz to 50MHz for measuring the impedance characteristics of components and materials. The measured parameters include |Z| (impedance), |Y| (admittance), θ (phase angle), X (reactance), R (series/parallel resistance), G (conductance), B (susceptance), L (inductance), D (dissipation factor), Q (quality factor), DCR (DC resistance), C (capacitance), ESR (equivalent series resistance), ε (relative permittivity), and μr (relative permeability).
• MICROTEST 6630 supports LAN/USB Host/USB Device/GPIB/RS-232 communication interfaces, making it compatible with automation equipment or human-machine interfaces (PLC).

Features of MICROTEST 6630:

• Frequency range: DC, 10Hz to 1/3/5/10/20/30/50MHz
• Basic accuracy up to ±0.08% (typical ±0.05%)
• ALC function
• Output impedance 25Ω/100Ω, switchable
• Support meter mode and list mode, can used with various fixtures, such as: liquid dielectric material test fixture, dielectric material test fixture and magnetic material test fixture
• Ultra-high measuring speed<3ms
• Open circuit/short circuit/load correction function
• Up to four component parameters can be selected in the electric meter mode. The inductance and DCR values can be measured and displayed simultaneously
• Auto component classification: Comparator function and Handler BIN classification function
• Support RS-232, GPIB, Handler, LAN, USB Host/Device interfaces
• PC connection data analysis software is available.

Applications:

• Passive Components: Capacitor, Inductor, Resistor, Transformer, Ceramic resonator, Quartz Crystal
• Semiconductor Components: The CV characteristics analysis of varactor diodes, Diodes
• Dielectric Material: Estimation on permittivity and consumption tangent of plastic, ceramic and PCB
• Other Components: Estimation of the impedance of PCB components.

II. Key features of Precision LCR meter MICROTEST 6630 Series (10Hz ~ 50MHz)

Automatic Production Line:

• Connect 6630 RS-232, LAN, GPIB or Handler to automatic machine (measuring speed<3mS), automated production is the most efficiency.

Measuring range:

• The precision impedance analyzer 6632 has seven frequency options(10Hz to 1/3/5/10/20/30/50MHz).

List Mode:

• 50 groups of list mode setting (Each group contains up to 15 steps).

Four Parameters Displayed Simultaneously/ Measure inductor (DCR):

• 7.0”TFT, 800x480 color screen, and four parameters can displayed simultaneously.
• Inductor coil turns and winding materials will affect DCR value. The key parameters for inductor are Ls / Lp / Q / SRF / DCR.

Magnetic Material Test Fixture (FX-0000C8):

• Using the magnetic material test fixture for measuring of permeability of various toroidal cores or ferrite cores and electromagnetic shielding coating materials, Precision LCR meter 6630 built-in formula to directly calculate the permeability coefficient value μr.

Dielectric Material Test Fixture (FX-0000C7)/ Liquid Dielectric Material Test Fixture (FX-000C20)

• Using the dielectric material test fixture for measuring PCB board or ceramic board.
• 6630 built-in formula to directly calculate the material dielectric value εr '/εr "
• Using the liquid dielectric material test fixture for measuring the characteristics of electrochemical materials.

III. Model of LCR tester MICROTEST 6630 Series

Technical specifications of Precision LCR meter MICROTEST 6630 Series (10Hz ~ 50MHz)

Measurement parameters:

System: