Single channel USB-to-CAN PC interface Kvaser Leaf Light HS v2 M12 with M12 connector for CAN access

Price: Contact

Model EAN: 73-30130-00881-6
Manufacturer Kvaser
Power supply Interface USB
Weight 110 g
Size 35 x 165 x 17 mm
Condition Stocking
Warranty 24 months

Single channel USB-to-CAN PC interface Kvaser Leaf Light HS v2 M12 with M12 connector for CAN access (EAN: 73-30130-00881-6) is ideal for diagnosing NMEA 2000 bus issues, configuring and flashing NMEA 2000 bus nodes, monitoring NMEA 2000 bus traffic and load conditions and stimulating or emulating NMEA 2000 nodes.

I. Major features of Single channel USB-to-CAN PC interface Kvaser Leaf Light HS v2 M12

  • ConStandard type “A” USB connector and an NMEA-approved male CAN connector.
  • Capable of sending up to 8000 messages per second, each time- stamped with 100 microsecond accuracy.
  • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
  • High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s.
  • Galvanic isolation, enhancing protection from power surges or electrical shocks.
  • Support for SocketCAN, see elinux.org or contact us for details.

II. Sofware

  • Documentation, Kvaser CANlib SDK and drivers can be downloaded for free at: www.kvaser.com/downloads.
  • Kvaser CANlib SDK is a free resource that includes everything you need to develop soſtware for the Kvaser CAN interfaces. Includes full documentation and many program samples, written in C, C++, C#, Delphi, Visual Basic, Python and t programming language.
  • Kvaser CAN hardware is built around the same common soſtware API. Applications developed using one device type will run without modification on other device types

III. Hardware of Single channel USB-to-CAN PC interface with M12 connector for CAN access

Hardware installation:

  • For the Kvaser Leaf Light v2 to communicate with the host computer, a compatible version of the Kvaser driver and firmware must be installed.
  • After the driver has been installed on the host computer, the firmware may then be downloaded and installed on the Kvaser Leaf Light v2.
  • The latest version of the driver and firmware can be downloaded from: www.kvaser.com/download.
  • The driver is installed by running the file: kvaser_drivers_setup.exe.
  • The Kvaser Leaf Light v2 may be inserted in any free USB socket on the host computer. You do not need to switch the power off before inserting or removing the device.

Firmware update:

  • Firmware updates and upgrade instructions can be found at: www.kvaser.com/download. Use “Kvaser Device Guide” to see the current firmware version of your Kvaser Leaf Light v2.

USB connector:

  • The Kvaser Leaf Light v2 has a standard USB type “A” connector.

CAN channels:

  • The Kvaser Leaf Light v2 has one CAN Hi-Speed channel with a CAN connector depending on the model. Either a 9-pin D-SUB, a 16-pin OBDII, a 5-pin M12 Male, a 9-pin J1939-13 Type I, or a 9-pin J1939-13 Type II connector is used.

Single-channel-usb-to-can-pc-interface-kvaser-leaf-light-hs-v2-m12-with-m12-connector-for-can-access-ean-73-30130-00881-6

Power supply:

  • The Kvaser Leaf Light v2 is powered from the USB port.

LED indicators:

  • The Kvaser Leaf Light v2 has two LEDs

LED

Function

Description

PWR (Green)

Power

Steady light when unit is powered and working.

USB configuration

Blinking once every three seconds when something is wrong with the USB connection.

Firmware

2 Hz flash if something is wrong with the firmware or configuration.

CAN (Yellow)

CAN RxTx

Status for CAN channel.

Technical data of Single channel USB-to-CAN PC interface Kvaser Leaf Light HS v2 M12 with M12 connector for CAN access

Bit Rate

40 – 1000 kbps

CAN Channels

1

CAN FD

No

Casing Material

PC-ABS

Connector

M12 5-pin

Current Consumption

90mA

Dimensions

35 x 165 x 17 mm

Error Frame Detection

Yes

Galvanic Isolation

Yes

Operating Temperature Range

-40 °C to +70 °C

PC Interface

USB

Silent Mode

No

Timestamp Resolution

100 μs

IP Class

IP40

Review Single channel USB-to-CAN PC interface Kvaser Leaf Light HS v2 M12 with M12 connector for CAN access

5 0% | 0 review
4 0% | 0 review
3 0% | 0 review
2 0% | 0 review
1 0% | 0 review
Review Single channel USB-to-CAN PC interface Kvaser Leaf Light HS v2 M12 with M12 connector for CAN access
Choose a image
0 character ( Minimum of 10)
    +

    There are no reviews yet.

    No comments yet

    SIGN UP FOR A CONSULTATION

    Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.

      COMMIT

      100% new product

      COMMIT

      100% refund if the product is of bad quality and not as promised

      24/7 SUPPORT

      Hotline: 0845 969 336

      DELIVERY

      Nationwide

      OTHER SAME PRODUCTS