Real time interface USB-to-CAN/CAN FD four-channel Kvaser USBcan Pro 4xHS

Price: Contact

Model EAN: 73-30130-01261-5
Manufacturer Kvaser
Power supply Interface USB Hi-speed
Weight 150 g
Size 50 x 170 x 20 mm
Condition Stocking
Warranty 24 months

Real time interface USB-to-CAN/CAN FD four-channel Kvaser USBcan Pro 4xHS (EAN: 73-30130-01261-5) with features include t programming and MagiSync™, which makes it possible to synchronise time stamps across multiple Kvaser MagiSync™-enabled devices without requiring extra wires.


I. Major features of Real time interface USB-to-CAN/CAN FD Kvaser USBcan Pro 4xHS

  • Multi-channel USB CAN interface with Kvaser t programmability.
  • 20 000 msg/s per channel, each timestamped with a resolution of 1 µs.
  • Kvaser MagiSync™ – automatic time synchronization.
  • Supports CAN FD, up to 8 Mbit/s (with correct physical layer implementation).
  • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
  • Supports silent mode for analysis tools – listen to the bus without
  • High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s.
  • Industrial grade temperature range, −40 oC to +85 oC.
  • Galvanic isolation.
  • Fully compatible with J1939, CANopen, NMEA 2000® and DeviceNet.
  • Simultaneous operation of multiple devices.
  • Power is taken from the USB bus.
  • Includes a 4-channel breakout cable.

II. Additional software and documentation

  • The Kvaser CANlib SDK includes everything you need in order to develop software applications interacting with Kvaser CAN and LIN hardware. The SDK contains full documentation and many sample programs, written in C, C++, C#, Delphi, Python and Visual Basic. Kvaser CAN and LIN hardware is built around the same common software API. Applications developed using one device type will run without modification on other device types.
  • The latest versions of documentation, software and drivers can be downloaded for free at:

III. Kvaser USBcan Pro 4xHS hardware

Hardware installation:

  • For the Kvaser USBcan Pro 4xHS to communicate with the host computer, a compatible version of the Kvaser driver and firmware must be installed.
  • After the driver has been installed on the host computer, the firmware may then be downloaded and installed on the Kvaser USBcan Pro 4xHS.
  • The latest version of the driver and firmware can be downloaded from:
  • The driver is installed by running the file: kvaser_drivers_setup.exe.
  • The Kvaser USBcan Pro 4xHS may be inserted in any free USB socket on the host computer. You do not need to switch the power off before inserting or removing the device.

USB connector:

  • The Kvaser USBcan Pro 4xHS has a standard USB type “A” connector.
  • Connect the device to your computer using any high quality USB 2.0 certified cable. The maximum total USB cable length is 5 m (∼ 16 ft).

CAN channels:

  • The Kvaser USBcan Pro 4xHS has four CAN channels in a single 26-pin HD D-SUB CAN connector.

Power supply:

  • The Kvaser USBcan Pro 4xHS is powered from the USB port.

LED indicators:

  • The Kvaser USBcan Pro 4xHS has one power LED and one traffic LED for each CAN channel.


Technical data of Real time interface USB-to-CAN/CAN FD four-channel Kvaser USBcan Pro 4xHS

CAN Channels


CAN Transceivers

CAN Transceivers MCP2561FD (Compliant with ISO 11898-2)

CAN Controller

Kvaser CAN IP in FPGA

Galvanic isolation


CAN Bit Rate

40 kbit/s to 1 Mbit/s

CAN FD Bit Rate

Up to 8 Mbit/s (with correct physical layer implementation)

Time stamp resolution

1 μs

Max message rate

20000 msg/s per channel

Error Frame Detection


Error Frame Generation


Silent mode


Kvaser CANtegrity


Host interface

USB Hi-Speed

Host OS

Windows (7 or later), Linux, Android.

Power consumption

max 500 mA

Hardware configuration

Done by software (Plug & Play).


50 x 170 x 20 mm for body incl. strain relief


150 g (300g including HD26-4DS9 Splitter)

Operating temperature

−40 ◦C to +85 ◦C

Storage temperature

−40 ◦C to +85 ◦C

Relative humidity

0 % to 85 % (non-condensing.)

Review Real time interface USB-to-CAN/CAN FD four-channel Kvaser USBcan Pro 4xHS

5 0% | 0 review
4 0% | 0 review
3 0% | 0 review
2 0% | 0 review
1 0% | 0 review
Review Real time interface USB-to-CAN/CAN FD four-channel Kvaser USBcan Pro 4xHS
Choose a image
0 character ( Minimum of 10)

    There are no reviews yet.

    No comments yet


    Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.


      100% new product


      100% refund if the product is of bad quality and not as promised

      24/7 SUPPORT

      Hotline: 0845 969 336