Supplying the cheapest moisture analyzer balance in Vietnam market

Monday, 07.06.2021

GMGA MEASURING – Supply moisture analysis balance | Weighing Dryer | Absolute Humidity Analyzer – Cheap & Genuine

Humidity Analysis Balance – What is Humidity Balance?

professional-humidity analyzer

  • Moisture analysis balance is a device used to analyze and quickly determine the absolute humidity of the sample to be tested. The moisture analyzers use the principle of gravity moisture measurement; or so-called consumable mass measurement method; or lost on drying at a certain temperature (LOD).
  • Moisture balance uses one of the most accurate methods available for moisture determination.

Advantage:

  • Moisture analyzers offer a great deal of flexibility; because the gravimetric moisture measurement and the measurement result are independent of the material. This means that no material properties or presets need to be saved; and preset by gravity humidity balance. Instead, gravity measurement of absolute humidity depends on sample weight.

Steps to check humidity:

  • To initiate moisture balance, a sample is weighed with an accurate scale. The sample was then dried and weighed continuously until the sample showed no change in weight. The weight of the sample after drying is concluded to be compared with the weight of the sample before drying.
  • In addition, the weight results during drying are recorded; and the final moisture or moisture content for the sample of material taken.
  • It is important to heat the sample just enough so that the material releases moisture without burning. Therefore, the temperature must be adjusted to match the heat resistance of the sample material.
  • Normally moisture balance products only provide measured values after about 5 to 90 minutes. However, the actual drying time depends on the moisture content and the size of the respective sample.

GMGA offers quality & accurate moisture analysis balances:

Provide moisture analysis balance

  • GMGA MEASURING offers optimized designed halogen moisture balance or moisture balance products; to make the gravimetric moisture measurement process as simple and convenient as possible. These halogen moisture balance models consist of two main components: a built-in precision scale and a drying chamber.
  • The moisture analyzer automatically determines and records the initial weight of the sample and tracks the weight throughout the entire drying process.
  • If the built-in precision scale no longer recognizes the weight difference after taking several measurements; drying is terminated and measurement data is recorded.
  • This automated process offers a significant time advantage over conventional oven drying. At regular intervals; a sample must be removed from the drying chamber and reweighed several times.
  • An additional advantage the GMGA Halogen Humidity Balancer offers is an integrated thermostat. This provides the user with the ability to easily adjust the temperature during the drying process. For example, a relatively wet sample can be dried in the initial phase at a higher temperature, because the higher humidity prevents the sample from burning. The drying temperature can then be lowered over time, so that as the sample becomes increasingly dry, the material does not burn..
  • Measurement data can be monitored in real time on the humidity level display; or on the screen of the connected PC. Measurement data can also be stored or printed for documentation purposes.

Provide moisture analysis balance Provide moisture analysis balance

Provide moisture analysis balance Provide moisture analysis balance Provide moisture analysis balance

Introductory video of moisture analysis balance:

GMGA MEASURING – The place that provides Quality & Genuine moisture analysis balances – Committed to being the CHEAPEST seller of moisture dryers in Vietnam market.

  • With many years of experience in the field of providing moisture analysis balances in particular; and Measurement & Analysis Equipment in general. GMGA MEASURING AND ANALYSING EQUIPMENT JOINT STOCK COMPANY is confident to be a distributor and retailer of moisture analysis balances in Vietnam.
  • We provide technical advice: Coming to GMGA, customers will be consulted by our experienced technical team on both techniques and products. Customers will choose the most suitable moisture analyzer product with the most reasonable price and quality.
  • GMGA moisture analyzer products provide Diversity, 100% Genuine & Quality; from famous brands: PCE – USA, AXIS – Poland…

AXIS ATS moisture analyzer balance:

  • Moisture Analysis Scales AXIS ATS are used for quick and accurate determination of material moisture; on the basis of weight loss during small sample drying (thermo-gravity method). The halogen radiator ensures perfect sample drying. Function based on lab scale mechanism.

PCE-MA 100 absolute humidity meter:

  • The PCE-MA 100 absolute moisture analyzer allows different materials to be weighed; and determine their moisture content. The heating chamber is heated by halogen lamps up to 199°C. The absolute hygrometer dries the material to be weighed in the chamber, and then calculates the moisture content from the difference in weight – to give an accurate measurement result most accurate.
    • Check or weigh capacity: 110 g / 3.88 oz
    • Resolution: 1 mg / 0.001 g / 0.01%
    • Adjust drying temperature and time.

PCE-MA 110 absolute humidity meter:

  • The PCE-MA 110 absolute humidity meter is an absolute humidity analyzer balance or a halogen moisture analyzer; operates on the principle of variable weight or loss in drying (LOD). The absolute hygrometer uses the halogen method to dry the material sample. The moisture content is calculated based on the weight difference before and after the drying process. Calibration of absolute hygrometer can be done at any time; using the automatic calibration function and the included 100 g weight.
    • Weighing range: 0.01 g … 110 g / 0.0035 … 3.88 oz
    • Scale resolution or legibility: 0.1 g / 10 mg
    • Humidity measuring range: 0…100%
    • Humidity resolution or legibility: 0.1%
    • Adjust drying time and temperature
    • Memory stores up to 16 drying profiles.

PCE-MA 200 absolute humidity meter:

  • The PCE-MA 200 Absolute Moisture Meter is used to weigh a wide range of substances up to 200g/7.05oz and measure their moisture content. One Halogen lamp can heat the chamber up to 199°C / 390°F. The absolute hygrometer dries the substance to be weighed in the heating chamber and determines the humidity from the weight difference -giving accurate results and highly reliable.
    • Check or weigh capacity: 200 g / 7.05 oz
    • Readability: 1 mg / 0.001 g / 0.01%
    • Adjust drying temperature and time
    • Accuracy to 0.01%.

Professional moisture analyzer AXIS AGS:

  • AGS technical moisture analyzer balance is used to determine the material moisture quickly and accurately; on the basis of weight loss during its small sample drying (thermo-gravity method). RS232C connection (as standard) allows connection of a printer or computer for instant printing of results, or further processing of weighing results. Printed raps allow GLP recommendation to be made.
    • Halogen heatsink
    • Graphic display
    • Text menu
    • Show drying chart
    • Report version with computer keyboard.

AXIS BTS technical moisture analyzer:

  • BTS technical moisture analyzer balance is used to determine the material moisture quickly and accurately; on the basis of weight loss during its small sample drying (thermo-gravity method). RS232C connection (as standard) allows connection of a printer or computer for instant printing of results, or further processing of weighing results. Printed raps allow GLP recommendation to be made.
    • Halogen heatsink
    • Graphic display
    • Text menu
    • Show drying chart
    • Drying profile
    • USB, RS232C and PS2 interfaces.

PCE-MA 202 absolute humidity analyzer:

  • Oven-drying absolute humidity analyzer PCE-MA 202 for weighing and heating material samples; for moisture determination. Chamber heating up to 199°C / 390°F when halogen lamps are used. Drying of the sample to be weighed takes place in the chamber of the absolute hygrometer; and the moisture is then calculated from the difference between the initial and final weight. From there, give the final accurate moisture analysis results.
    • Check or weigh capacity: 200 g / 7.05 oz
    • Resolution: 10 mg / 0.01 g / 0.1%
    • Adjust the drying temperature and time.

GMGA – Committed to cheap & best quality:

  • In addition, GMGA MEASURING is committed to providing moisture analysis balance with the cheapest price in Vietnam market. The products we provide are 30%-50% CHEAP compared to the market. Promotions and Discounts are continuously applied to new customers and for orders valued at 50 million or more.
  • If you need technical advice and buy products, please contact us: (+84) 0845 969 336 _ 24/7, Email: info@gmga.vn.

GMGA MEASURING AND ANALYSING EQUIPMENT JOINT STOCK COMPANY

Address: No. 10, Alley 42/293 Thinh Liet Street, Thinh Liet Ward, Hoang Mai District, Hanoi City, Vietnam.

Website: https://gmga.vn/

Fanpage: https://www.facebook.com/gmga.vn/

Thank you very much and look forward to serving you soon !

Other news and event

Monday, 07.06.2021

Rent laser alignment equipment | GMGA MEASURING | Seiffert Industrial

GMGA MEASURING understands that you may only need to use certain devices a few times a year; or even buying less is sometimes not the best choice. Customers can rent laser alignment equipment to align belts and pulleys; laser roll alignment ; balance accuracy; straightness; flatness; and align the bore in these cases. This way…

Monday, 07.06.2021

Selling Quality Meters Cheaper Than 30% Vietnam Market !

GMGA – Providing cheap, quality, high-accuracy force gauges ! Definition of force gauge: Digital force gauges, commonly known as machines or force gauges or tension and compression gauges. Used in material inspection; quality control and assurance; study; develop; product testing; laboratory; and educational apps. Machines – gauges – force measuring equipment of GMGA: The products…

Monday, 07.06.2021

Supplying the cheapest moisture analyzer balance in Vietnam market

GMGA MEASURING – Supply moisture analysis balance | Weighing Dryer | Absolute Humidity Analyzer – Cheap & Genuine Humidity Analysis Balance – What is Humidity Balance? Moisture analysis balance is a device used to analyze and quickly determine the absolute humidity of the sample to be tested. The moisture analyzers use the principle of gravity…

Wednesday, 09.06.2021

Tips to buy Industrial Endoscope Camera

I. Find the right Industrial Borescope for your application Call the GMGA technical support hotline: (+84) 0845 969 336; for assistance finding the right industrial borescope inspection camera to meet your needs. GMGA professional technicians and experts will ask you specific questions about your application or project; and then recommend a suitable borescope camera product…

Wednesday, 09.03.2022

Tips for buying a coating thickness gauge!

Coating thickness gauge – All about coating thickness gauge/tester – Advice for buying a coating thickness gauge What is coating thickness measurement? Coating thickness measurement is the determination of the layer depth of a coating or film on a particular substrate. Coating thickness can be measured when the film is wet or dry. However, non-destructive…