Impedance analyzer

Impedance analyzer MICROTEST 6632S Series (10Hz ~ 50MHz) offers a wide frequency range of 10Hz to 50MHz for measuring the impedance characteristics of components and materials.

• Frequency range: DC, 10Hz to 1/3/5/10/20/30MHz/50MHz
• Basic accuracy up to ±0.08% (typical ±0.05% )
• Equivalent Circuit Analysis
• Automatic Level Control (ALC)
• Output impedance 25Ω/100Ω, switchable
• Support meter mode and list mode, sweep mode
• Built-in DC Bias voltage ±12V
• Ultra-high measuring speed < 3ms
• Open circuit/short circuit/load correction function
• Comparator function
• BIN classification function
• Built-in the Permeability-μr
• Built-in the Dielectric constant-εr.

Accurate impedance analyzer MICROTEST 6632 Series offers a wide frequency range of 10Hz to 50MHz, with a variety of measurement parameters including: |Z|, |Y|, θ, X, R, G, B , L, D, Q, DCR, C, ESR, ε and μr. So MICROTEST 6632 is suitable for many of your impedance measurement and analysis applications.

• Frequency range: DC, 10Hz to 1/3/5/10/20/30MHz/50MHz
• Basic accuracy up to ±0.08% (typical ±0.05% )
• Automatic Level Control (ALC)
• Output impedance 25Ω/100Ω, switchable
• Support meter mode and list mode, sweep mode
• Built-in DC Bias voltage ±12V
• Ultra-high measuring speed < 3ms
• Open circuit/short circuit/load correction function
• Comparator function
• BIN classification function
• Built-in the Permeability-μr
• Built-in the Dielectric constant-εr.