Product

Categories

Wireless CAN bridge

Showing all 4 results

Wireless CAN bridge uses a M12 connector dust and water-tight Kvaser Air Bridge Light HS M12 configuration-free

Model: EAN: 73-30130-01141-0

Wireless CAN bridge uses a M12 connector dust and water-tight Kvaser Air Bridge Light HS M12 configuration-free (EAN: 73-30130-01141-0) to connect CAN networks.

  • IP67-rated M12 connector on each unit; dust and water-resistant.
  • Automatic baud rate detection (125K, 250K, 500K, 1M).
  • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
  • High-Speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s.
  • Compatible with J1939, CANopen, NMEA 2000® and DeviceNet.
  • Extended operating temperature range from -40 to +70 °C.

Wireless CAN bridge uses a M12 connector dust and water-tight Kvaser Air Bridge Light HS M12 (FCC) configuration-free

Model: EAN: 73-30130-01148-9

Wireless CAN bridge uses a M12 connector dust and water-tight Kvaser Air Bridge Light HS M12 (FCC) configuration-free (EAN: 73-30130-01148-9) to connect CAN networks.

  • IP67-rated M12 connector on each unit; dust and water-resistant.
  • Automatic baud rate detection (125K, 250K, 500K, 1M).
  • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
  • High-Speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s.
  • Compatible with J1939, CANopen, NMEA 2000® and DeviceNet.
  • Extended operating temperature range from -40 to +70 °C.

Wireless CAN bridge Kvaser Air Bridge Light HS (FCC) configuration-free

Model: EAN: 73-30130-01008-6

Wireless CAN bridge Kvaser Air Bridge Light HS (FCC) configuration-free is a small, yet advanced, wireless CAN bridge that can be used as a CAN system gateway between two CAN networks.

The Kvaser Air Bridge Light HS consists of a preconfigured pair of "plug and play" units.

  • A preconfigured pair of units that acts as a wireless CAN system gateway between two CAN networks.
  • Automatic Baudrate Detection (125K, 250K, 500K, 1M).
  • 4 GHz Proprietary Protocol.
  • Automatic baud rate detection (125K, 250K, 500K, 1M).
  • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
  • High-Speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s.

Configuration-free wireless CAN bridge Kvaser Air Bridge Light HS

Model: EAN: 73-30130-00808-3

Kvaser Air Bridge Light HS is a small, yet advanced, wireless CAN bridge that can be used as a CAN system gateway between two CAN networks.

The Kvaser Air Bridge Light HS consists of a preconfigured pair of plug and play units.

  • 4 GHz proprietary protocol.
  • Automatic baud rate detection (125K, 250K, 500K, 1M).
  • High-Speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s.
  • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.