Industrial Equipment

Two channel USB-to-CAN interface Kvaser USBcan R v2 is a reliable low cost product. In hostile environments where dust and water are the norm, the IP65 rated housing assures reliable protection. With a time stamp precision of 100 microseconds it handles transmission and reception of standard and extended CAN messages on the bus. It is compatible with applications that use Kvaser’s CANlib.

• Capable of sending up to 15000 messages per second
• Supports High Speed CAN (ISO 11898-2) up to 1Mbit/s.
• Supports both 11-bit (CAN 2.0A) and 29- bit (CAN 2.0B active) identifiers.
• Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet.

Real time interface USB-to-CAN/CAN FD Kvaser USBcan Pro 4xHS is a small, yet advanced, portable multi channel CAN to USB real time interface that handles transmission and reception of standard and extended CAN messages on the CAN bus with a high time stamp precision. The Kvaser USBcan Pro 4xHS is compatible with applications that use Kvaser‘s CANlib.

• 20 000 msg/s per channel, each timestamped with a resolution of 1 µs.
• Supports CAN FD, up to 8 Mbit/s (with correct physical layer implementation).
• Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
• High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s.
• Fully compatible with J1939, CANopen, NMEA 2000® and DeviceNet.

Four channel USB-to-CAN PC interface Kvaser USBcan Light 4xHS is a small, yet advanced, portable multi channel CAN to USB real time interface that handles transmission and reception of standard and extended CAN messages on the CAN bus with a high time stamp precision. The Kvaser USBcan Light 4xHS is compatible with applications that use Kvaser‘s CANlib.

• Low cost USB CAN interface.
• Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
• High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s.
• Fully compatible with J1939, CANopen, NMEA 2000R and DeviceNet.

Dual channel USB-to-CAN/CAN FD interface Kvaser USBcan Pro 2xHS v2 is a small, yet advanced, portable multi channel CAN to USB real time interface that handles transmission and reception of standard and extended CAN messages on the CAN bus with a high time stamp precision. The Kvaser USBcan Pro 2xHS v2 is compatible with applications that use Kvaser‘s CANlib.

• Supports CAN FD, up to 8 Mbit/s
• Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
• High-speed CAN connections (compliant with ISO 11898-2), up to 1 Mbit/s.
• Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet.

Dual channel USB-to-CAN interface Kvaser USBcan Light 2xHS is a compact, reliable and cost-effective means of connecting two high speed CAN busses to a PC or mobile computer.

With a USB 2.0 compliant connector at one end and two 9-pin D-SUB connectors at the other,  ergonomically designed housing and comes with galvanic isolation as standard.

• Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
• High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s.
• Fully compatible with J1939, CANopen, NMEA 2000R and DeviceNet.

High speed CAN interface single channel Kvaser PCIcanx II HS is a single channel, high speed CAN (controller area network) interface board for the PCI-X and PCI bus. It features an on-board microcontroller for offloading your main CPU and galvanic isolation for protection against voltage spikes.

• Compliant with PCI 2.3.
• Supports CAN 2.0 A and 2.0 B (active).
• High-speed ISO 11898 compliant driver circuit, supports bit rates up to 1 Mbit/s.
• 16 MHz CAN oscillator frequency.