Products

Versatile CAN interface Kvaser Leaf v3 OBD-II provides seamless access to vehicle diagnostics from your PC.

• USB 2.0 CAN interface.
• Powered through the USB Type A-connector.
• Compact 16-pin OBD-II connector with extra strong strain relief.
• Supports CAN FD, up to 8 Mbit/s.
• Support for SocketCAN.

CAN bus interface Kvaser Leaf v3 M12 5-pin is a versatile and reliable interface for connecting a computer to a CAN bus network in automation, industrial, and marine environments.

• USB 2.0 CAN interface.
• Powered through the USB Type A-connector.
• Compact 5-pin M12 connector.
• Supports CAN FD, up to 8 Mbit/s.
• Quick and easy plug-and-play installation.
• Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.

CAN/CAN FD Bus Interface Kvaser Leaf v3 J1939-13 Type II is a reliable low cost product for connecting a computer to a CAN bus network, enabling the monitoring and transmission of CAN and CAN FD data.

• USB 2.0 CAN interface.
• Compact 9-pin J1939-13 Type II.
• Supports CAN FD, up to 8 Mbit/s.
• Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
• Support for SocketCAN.
• Supports simultaneous usage of multiple Kvaser interfaces. Compatible with J1939, CANopen, NMEA 2000® and DeviceNet.

Circuit board USB-to-CAN bus interface single-channel high speed Kvaser Leaf v3 CB is a CAN interface reliable, low cost product. With a time stamp precision of 50 microseconds it handles transmission and reception of standard and extended CAN messages on the bus. It is compatible with applications that use Kvaser’s CANlib.

• USB CAN interface.
• Supports CAN FD, up to 8 Mbit/s.
• Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
• 20000 msg/s, each timestamped with a resolution of 50 µs.
• Support for SocketCAN.
• Compatible with J1939, CANopen, NMEA 2000® and DeviceNet.

CAN/CAN FD interface Kvaser Leaf v3 represents one of the easiest and lowest-cost methods of connecting a computer to a CAN bus network in order to monitor and transmit CAN and CAN FD data.

With its standard USB type “A” connector and 9-pin D-SUB connector, the Leaf v3’s sleek, ergonomically designed housing is both robust enough for every-day use and small and flexible enough to be used in space- constrained applications.

• USB 2.0 CAN interface.
• Powered through the USB type “A” connector.
• Supports CAN FD, up to 8 Mbit/s.
• Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
• 20 000 msg/s, each timestamped with a resolution of 50 µs.
• Support for SocketCAN.
• Compatible with J1939, CANopen, NMEA 2000® and DeviceNet.

Coating thickness measuring meters List-Magnetik TOP-CHECK Ferro with the integrated, unique 90° pivotable probe help to you can always make precise measurements.

• Measurement of paint, varnish, plastic and galvanic coatings on steel (ISO 2178)
• Measuring probe: pivotable by 90°
• Measuring range: 0-5000 µm
• Accuracy: less than 100 µm ± 1 µm, 100-1000 µm: ± 1%, 1000-2000 µm: ± 3%,> 2000 µm: ± 5%.