Dual channel interface flexible for CAN, CAN FD and LIN Kvaser Hybrid Pro 2xCAN/LIN with t-Program

Dual channel interface flexible for CAN, CAN FD and LIN Kvaser Hybrid Pro 2xCAN/LIN as a Pro-level device, this interface can host user-developed programs, created using resources provided within Kvaser’s free CANlib SDK.

These can be designed to accomplish a range of advanced tasks, such as CAN node simulation and CAN flashing, or create a LIN to CAN gateway. Guidance and code examples are provided.

I. Major features of Dual channel interface flexible for CAN, CAN FD and LIN

• Hybrid USB CAN/LIN interface with Kvaser t programmability.
• Supports both LIN master and LIN slave mode
• Supports LIN 1.3 to 2.2
• LIN reference voltage detection
• Supports CAN FD, up to 5 Mbit/s (with correct physical layer implementation).
• Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
• Kvaser MagiSync – automatic time synchronization
• Powered through the USB connector.
• Fully compatible with J1939, CANopen, NMEA 2000R and DeviceNet.
• 100% compatible with applications written for other Kvaser CAN hardware with Kvaser CANlib and Kvaser LINlib.
• Quick and easy plug-and-play installation.

II. Additional software and documentation

• The Kvaser CANlib SDK includes everything you need in order to develop software applications interacting with Kvaser CAN and LIN hardware. The SDK contains full documentation and many sample programs, written in C, C++, C#, Delphi, Python and Visual Basic. Kvaser CAN and LIN hardware is built around the same common software API. Applications developed using one device type will run without modification on other device types.
• The latest versions of documentation, software and drivers can be downloaded for free at: kvaser.com/download.

III. Hardware of Dual channel interface Kvaser Hybrid Pro 2xCAN/LIN

Hardware installation:

• For the Kvaser Hybrid Pro 2xCAN/LIN to communicate with the host computer, a compatible version of the Kvaser driver and firmware must be installed.
• After the driver has been installed on the host computer, the firmware may then be downloaded and installed on the Kvaser Hybrid Pro 2xCAN/LIN.
• The latest version of the driver and firmware can be downloaded from: www.kvaser.com/download.
• The driver is installed by running the file kvaser_drivers_setup.exe.
• The Kvaser Hybrid Pro 2xCAN/LIN may be inserted in any free USB socket on the host computer. You do not need to switch the power off before inserting or removing the device.
• For information on how to upgrade the firmware, please contact us!

USB connector:

• The Kvaser Hybrid Pro 2xCAN/LIN has a standard USB type “A” connector.

CAN/LIN channels:

• The Kvaser Hybrid Pro 2xCAN/LIN has two LIN/CAN channels in two seperate 9-pin D-SUB CAN connectors.

Power supply:

• The Kvaser Hybrid Pro 2xCAN/LIN is powered from the USB port. You also need to apply a reference voltage to the LIN reference power pin when running the channel in LIN mode.

LED Indicators:

• The Kvaser Hybrid Pro 2xCAN/LIN has a single power LED as well as one traffic LED and one Informational LED for each CAN/LIN channel.

Technical data of Dual channel interface flexible for CAN, CAN FD and LIN Kvaser Hybrid Pro 2xCAN/LIN