Handheld electrostatic discharge gun ESD SESD 230 30kV

Price: Liên hệ

Model	SESD 230 30kV
Manufacturer	Schlöder GmbH
Power supply
Weight
Size
Condition	Còn hàng
Warranty	12 tháng

Details description
Specifications
Video
Download document
Accessory

I. Specifications of ESD SESD 230 30kV handheld electrostatic discharge gun

Handheld electrostatic discharge gun ESD SESD 230 30kV

The Schloeder SESD 230 30kV Schlöder ESD Simulator is suitable for performing EMC tests on systems and systems according to IEC/EN 61000-4-2 (ESD testing).
Higher test levels can be set far beyond standard limits. Depending on the test object and test setup, two test methods will be used: exhaust and exposure. In the case of gas discharge, pulses are triggered by approaching the test object. When the contact is discharged, the test head is placed on the test object.
Contact control: ESD SESD 230 30kV Schlöder hand-held electrostatic discharge gun with "contact control". If there is no contact, the pulse is not activated! The display shows "No contact". This ensures that a true discharge takes place when the contact is discharged.
Always ready to go: ESD SESD 230 emulator works with Battery. If the Battery is dead, it can be charged immediately with the charger included in the range of delivery without needing to change the battery. The in-display charging bar indicates the charging status.

- 2 test methods applicable: exhaust or contact
- Predefined standard test levels: Higher test levels can be set far beyond the standard limits
- Displays actual discharge voltage during exhausting
- Automated programming test process
- Large display with easy-to-read digits
- Battery and power operation.

II. Standard package

SESD 230 Generator
Charger with connection cable
Exhaust probe (SESD 3020)
Contact discharge test probe (SESD 3021)
Strap (SESD 231)
Operating manual.

***You may be interested in the GMGA surge generator and EMC measurement system: https://gmga.vn/en/danh-muc/maintenance-equipment/surge-generators-and-emc-measuring-systems/

III. Specifications of Handheld electrostatic discharge gun ESD SESD 230 30kV

Output voltage	Adjustable via encoder
Operating mode	Air discharge and
Operating mode	Contact discharge
Air discharge	± 0.2 kV to ± 30 kV, 100 V steps
Contact discharge	± 0.2 kV to ± 30 kV, 100 V steps
Polarity	Positive and negative
Special function	In counter operation, either polarity changeover after half the set pulses

Repetition rate
Air discharge	Single pulse or repetitive (Frequency depends on the distance of the discharge electrode / test object)
Contact discharge	Single pulse, 0.1 Hz, 0.2 Hz, 1 Hz, 2 Hz, 5 Hz, 10 Hz, 20 Hz.
Continuous operation	Possible with air discharge and contact discharge

Holding time	≥ 5 sec
Preset counter	1 - 9999
Discharge electrodes	According to IEC / EN 61000-4-2
Impact capacity	150 pF ± 10%
Discharge resistance	330 ohm ± 5%
Self-test	In 14 steps, can be activated via interface
Working temperature	0 - 40 ° Celsius
Relative humidity	0 - 60%
Weight approx .	1470 g