Insulation tester PCE-ITE 50

Price: Liên hệ

Model	PCE-ITE 50
Manufacturer	PCE
Power supply
Weight
Size
Condition	Còn hàng
Warranty	12 tháng

Details description
Specifications
Video
Download document
Accessory

I. Specification of PCE-ITE 50 insulation tester

Robust insulation tester / Resistance / Grounding resistance / Grinding impedance / Voltage measurement / Low resistance measurement / RCD tester.

The PCE-ITE 50 is a powerful installation tester with a large 3.5 inch color LCD display.
PCE-ITE 50 installation tester provides different measurement modes like insulation resistance, grounding resistance, loop impedance, voltage, Low impedance measurement and RCD test with camera function, the ability to record photos in accordance with the measurements.
With the PCE-ITE 50 installation checker, users can ensure that permanent installations are installed safely and correctly. Thanks to the dual displays, intuitive icons and high viewing angles, you can comfortably and quickly perform your measurements with the PCE-ITE 50 installation tester.
With the low resistance measurement of the PCE-ITE 50 installation tester, users can test ground conductors, potential equalization rails and protective conductors for low impedance.
The measuring range for low resistance measurements with the PCE-ITE 50 teser setting is between 0 - 2000 with a resolution of 0.001 - 1. Perhaps the most important measurement of the PCE-ITE 50 installation tester is the measurement. insulation resistance measurement. Electrical cables are placed under voltage during insulation measurement to detect fault currents, induce material migration or heat.
In most cases, the current faults are so small that they are not detected by the protective devices and in the worst case they can lead to a fire. The PCE-ITE 50 Installation Tester can perform installation measurements with test voltages of 125V, 250V, 500V or 1000V. The load current is in each case 1 mA.
The PCE-ITE 50 Installation Checker is independent of the mains supply. To bring all systems and circuits of the power supply system to a common potential (ground reference or potential reference) and to protect against short-circuit currents and overvoltages, the grounding resistance must be lowest possible impedance.
With a measuring range of 0 ... 2000 with a resolution of 0.01 ... 1, the DT-6650 installation tester provides all the prerequisites for meaningful grounding resistance measurement.

II. Advantages

3.5" TFT LCD display
Loop resistors LN, L-PE and N-PE
Adjustable FI test current
SD Card and Bluetooth
Dual screen
Check FI good/bad
Low Ohm Measurement
Terminal voltage up to 1000V.

***View more GMGA insulation testers at: https://gmga.vn/en/danh-muc/testing-equipment/insulation-testing-equipment/

III. Specifications of insulation tester PCE-ITE 50

Isolation test
Terminal voltage	Measuring range	Resolution	Accuracy	Load current	Short circuit current
125V (0 ... 10 %)	0,125 ... 4 MΩ	0.001 MΩ	± (2% + 10 digits)	1-mA @ Last 125 kΩ	<= 1-mA
	4,001 ... 40 MΩ	0.01 MΩ	± (2% + 10 digits)
	40,01 ... 400 MΩ	0.1 MΩ	± (4% + 5 digits)
	400,1 ... 1000 MΩ	1 MΩ	± (5% + 5 digits)
250V (0 ... 10 %)	0,125 ... 4 MΩ	0.001 MΩ	± (2% + 10 digits)	1-mA @ Last 250 kΩ	<= 1-mA
	4,001 ... 40 MΩ	0.01 MΩ	± (2% + 10 digits)
	40,01 ... 400 MΩ	0.1 MΩ	± (3% + 2 digits)
	400,1 ... 1000 MΩ	1 MΩ	± (3% + 2 digits)
500V (0 ... 10 %)	0,125 ... 4 MΩ	0.001 MΩ	± (2% + 10 digits)	1-mA @ Last 500 kΩ	<= 1-mA
	4,001 ... 40 MΩ	0.01 MΩ	± (2% + 10 digits)
	40,01 ... 400 MΩ	0.1 MΩ	± (3% + 2 digits)
	400,1 ... 1000 MΩ	1 MΩ	± (4% + 5 digits)
1000 V (0 ... 10 %)	0,125 ... 4 MΩ	0.001 MΩ	± (3% + 10 digits)	1-mA @ Last 1 MΩ	<= 1-mA
	4,001 ... 40 MΩ	0.01 MΩ	± (2% + 10 digits)
	40,01 ... 400 MΩ	0.1 MΩ	± (3% + 2 digits)
	400,1 ... 1000 MΩ	1 MΩ	± (4% + 5 digits)
Low Ohm
Measuring range	Resolution	Accuracy		Max. open circuit voltage	Overload protection
2,000 Ω	0.001 Ω	± (1.5% + 30 digits)		5.8V	250 Vrms
20,00 Ω	0.01 Ω	± (1.5% + 3 digits)		5.8V	250 Vrms
200,0 Ω	0.1 Ω	± (1.5% + 3 digits)		5.8V	250 Vrms
2000 Ω	1 Ω	± (1.5% + 5 digits)		5.8V	250 Vrms
Continuity tester
Measuring range	Resolution		Max. open circuit voltage	Overload protection	Short circuit current
2000 Ω	0.01 Ω		5.8V	250 Vrms	>= 200-mA
Grinding resistance
L-PE (Hi-Amp): Load current 4.0 A
Measuring range		Resolution		Accuracy
0.23 ... 9.99 Ω		0.01 Ω		± (4% + 4 digits)
10.0 ... 99.9 Ω		0.1 Ω		± (4% + 4 digits)
100 ... 999 Ω		1 Ω		± (4% + 4 digits)
L-PE (without tripping): Load current 15-mA
Measuring range		Resolution		Accuracy
0.23 ... 9.99 Ω		0.01 Ω		± (5% + 6 digits)
10.0 ... 99.9 Ω		0.1 Ω		± (5% + 6 digits)
100 ... 999 Ω		1 Ω		± (5% + 6 digits)
L-N: Load current 4.0 A
Measuring range		Resolution		Accuracy
0.23 ... 9.99 Ω		0.01 Ω		± (4% + 4 digits)
10.0 ... 99.9 Ω		0.1 Ω		± (4% + 4 digits)
100 ... 999 Ω		1 Ω		± (4% + 4 digits)
RCD Test
RCD (In)			10-mA, 30-mA, 100-mA, 300-mA, 650-mA, 1 A
Factors			x 1/2, x1, x2, x5
Accuracy of the tripping time			± (1% + 1 ms)
Signal form of the test current			Sine (AC), pulse (DC)
Tripping characteristics			G and S
Release time			0° or 180°
Voltage range			194 ... 260V AC (50/60 Hz)
Accuracy of current measurement			± (5% + 2 digits)
RCD Types			Type A, Type B
Voltage measurement
Measuring range		Resolution		Accuracy
80...500 V AC/DC		1 V		± (2 % + 2 digits)
Frequency measurement
Measuring range		Resolution		Accuracy
45...65 Hz		1 Hz		±2 Hz
Grounding measurement
Measuring range		Resolution		Accuracy
0.00...99.99 Ω		0.01 Ω		± (2% + 30 digits)
100.0...999.9 Ω		0.1 Ω		± (2% + 6 digits)
1000...2000 Ω		1 Ω		± (2% + 6 digits)
General specifications
Power supply			8 x 1.2 ... 1.5V AA batteries
Operating time			ca. 15 h
Measurement category			CAT III 600V
Protection class			IP 65
Display			3.5" TFT (320 x 240 Pixel)
Operating environment			0 ... 45°C
			0 ... 95% rH, non condensing
Measurements			24.2 x 10.5 x 14.5 cm
Weight			1.56 kg / 3.4 lbs