Product

Categories

Hardness measuring equipment

Showing 13–18 of 29 results

concrete-hardness-test-hammer-pce-ht-225e

Concrete hardness test hammer PCE-HT 225E

Model: PCE-HT 225E

PCE-HT 225E Concrete Hardness Hammer, also known as concrete recovery hammer or Swiss hammer, is used for non-destructive measurement of surface hardness and compressive strength. Suitable for use with concrete, stone and building materials. This concrete hardness tester has a live digital display, voice function, USB data interface and memory to store up to 200 measurement values.
  • Test range: 10 ... 60 MPa or 100 ... 600 kg/cm² / 1450.38 ... 8702.26 psi
  • Impact Energy: 2,207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Stroke : 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of sphere tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • Includes data processing software.
View Detail Quote
metal-hardness-tester-pce-950-ica-with-iso-certificate

Metal hardness tester PCE 950-ICA with ISO certificate

Model: PCE-950-ICA

Metal hardness tester. PCE 950-ICA with ISO certificate used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.
  • Measuring range: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA /  19-655 HB / 80-976 HV / 32.2-115 HS
  • Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
  • Accuracy: 2% / Repeatability: 2%
  • Impact device: Class D (built-in)
  • Data analysis software
  • Use with wrought steel, cold rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, copper and copper alloy metal forging
  • Includes ISO calibration certificate.
View Detail Quote
leeb-hardness-tester-pce-2000n-including-iso-certificate

Leeb hardness tester PCE-2000N including ISO certificate

Model: PCE-2000N / ISO

Leeb Hardness Tester - The PCE-2000N hardness meter uses the Leeb recovery method. This is a method of dynamic hardness testing in which a standardized test piece, usually a hard metal ball, is struck with a specified impact energy on the test surface.
  • Measure by Leeb Rebound method
  • Hardness scale: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
  • Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
  • External impact device on 1.5 m / 4.9 ft . cable
  • Accuracy: ±0.5% (@800 HLD), Repeatability: 0.8% (@800 HLD)
  • Measure data stored on USB stick
  • Color display, can measure at different angles
  • Includes ISO Calibration Certificate.
View Detail Quote
barcol-hardness-tester-pce-1000n

Barcol hardness tester PCE-1000N

Model: PCE-1000N

The Barcol PCE-1000N hardness tester is a hand-held durometer for the hardness measurement of pure aluminum, soft aluminum, thick aluminum alloys and aluminum plates, strips, bars, castings and forgings. The hardness of fiber-reinforced plastics (FRP), glass-reinforced plastics (GRP), hard plastics and soft metals (such as copper or lead) can also be tested with this battery-powered Barcol impressive durometer.
  • Measurement parameters: Barcol (HBA), Brinell (HB), Vickers (HV), Webster (HW), Rockwell (HRB / HRE / HRF / HRH)
  • Measuring range: 0 ... 100 HBA / 25 ... 150 HB
  • Accuracy: 81 ... 88 HBA: ± 1 HBA / 42 ... 48 HBA: ± 2 HBA
  • Repeatability: 81 ... 88 HBA: ± 1.5 HBA / 42 ... 48 HBA: ± 2.5 HBA
  • Resolution : 0.1 HBA.
View Detail Quote
metal-hardness-tester-pce-2500n-ica-includes-iso-certificate

Metal hardness tester PCE-2500N-ICA includes ISO certificate

Model: PCE-2500N-ICA

The PCE-2500N-ICA Metal Hardness Tester includes an ISO certificate the size of a pen, rebound hammer or durometer for use with metals. This highly accurate hardness tester quickly and accurately measures the surface hardness of 10 common metal materials including steel, cast steel, alloy tool steel, stainless steel, cast iron, ductile iron, cast aluminum alloy, copper, bronze and bronze.
  • Measuring principle: Leeb recovery method
  • Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB), Vickers (HV), Shore (HS) or Leeb (HLD)
  • Measuring range: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
  • Accuracy: ±0.5%;
  • Repeatability: ± 0.8%
  • EASY type impact device
  • Includes ISO calibration certificate.
View Detail Quote
metal-hardness-tester-pce-2900-ica-with-iso-certificate

Metal hardness tester PCE 2900-ICA with ISO certificate

Model: PCE-2900-ICA

Metal Hardness Tester PCE 2900-ICA - Material Hardness Meter has been developed to measure hardness on metallic materials. The PCE-2900 hardness tester measures the hardness of materials in Vickers, Brinell, Rockwell, Leeb and Shore. The PCE-2900 hardness tester measures hardness according to the Leeb recovery principle.
  • Measure by Leeb Rebound method
  • Measurement unit: HLD, HRA, HRB, HRC, HB, HV, HS
  • Measuring range: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
  • Accuracy: ±0.5%, Repeatability: ±0.6%
  • Impact unit: EASY type
  • USB and WiFi for data transfer
  • Includes ISO Calibration Certificate.
View Detail Quote