Product
Categories
- Measuring Equipment
- Vibration meter
- Force measuring equipment
- LCR Meter
- Versatile measuring equipment
- Temperature measuring equipment
- Electrical measuring equipment
- Roughness measuring meter
- Refractometer
- Viscosity meter and rheometer
- Magnetic field measuring equipment
- Microscope
- Roundness measuring equipment
- Contour measuring equipment
- Gas measuring equipment
- Diagonal and straight line laser
- Humidity measuring equipment
- Climate measuring equipment
- Spectrophotometer
- Light meter
- Gloss measuring equipment
- Distance measuring equipment
- Airflow measuring equipment
- COD meter
- Altimeter
- Mass measuring equipment
- DO meter
- Pressure gauge
- Hardness measuring equipment
- Flow meter
- Radiation meter
- Turbidity meter
- Length measuring equipment
- Thickness measuring equipment
- Dimension measuring equipment
- Sound and Noise measure
- Analytical Equipment
- Impedance analyzer
- Air quality analyzer
- Versatile analyzer
- Moisture analyzer equipment
- Conductivity analyzer and meter
- Roundness analyzer
- Logic analyzers
- Steel structure analysis equipment
- pH measure and analyze equipment
- Gas analysis equipment
- Mass analyzer
- Power quality analyzer
- Vibration analyzer
- Testing Equipment
- Charging test system
- Rub tester
- DC Bias current test system
- Hipot tester
- Impulse winding tester
- Transformer test
- Air permeability tester equipment
- Weight checking equipment
- Protective equipment testing equipment
- Insulation testing equipment
- Material flow index tester
- Friction testing equipment
- Headphone testing equipment
- Shrinkage testing equipment
- Cable harness tester
- Heat seal testing equipment
- Motor testing system
- Edge banding tester
- Stacking and compression testing equipment
- EV charging connection test system
- Versatile test equipment
- Vibration shaker test system
- Organic gas transmission rate test system
- Adhesion testing equipment
- Food testing equipment
- Seal leak tester
- Material mechanical property testing machine
- Tensile strength test equipment
- Water vapor permeability tester
- Apparatus for testing water vapor permeability by means of an electrolytic detection sensor
- Equipment for testing water vapor permeability by means of a moisture detection sensor
- Equipment for testing water vapor permeability by infrared detection sensor method
- Equipment for testing water vapor permeability by gravity method
- Air permeability tester
- Concrete testing equipment
- Maintenance Equipment
- Pulley alignment
- Parallel roll and roller alignment
- Video borescope
- Wood trunk defect testing equipment
- UV radiation equipment
- Ultrasonic weld testing equipment
- Defect detector
- ESD electrostatic simulator
- Surge generators and EMC measuring systems
- Bearing heater
- Concentric coaxial alignment equipment
- Dew point scanning equipment
- Sound meter calibration system
- Device for leak diagnosis and tightness test
- Metal detector
- Thermal camera
- High speed camera
- Routing system
- Rebar detector
- Vibration diagnostic equipment detects defects
- Voltage detector
- Crankshaft deflection indicator
- Gas detector
- Pipeline detector
- Vulnerability detector
- Air quality monitoring equipment
- Surface wall scanner
- Mechanical calibration equipment
- Process Equipment
- DC bias current source
- Workstation ART
- PCR thermal cycler
- Time-Lapse IVF incubator
- Biological safety cabinets
- Ultra-low temperature freezer
- Nucleic acid extraction system
- PCR cabinet
- Cell harvesting system
- Furnaces
- Bioreactors and fermenters
- Sound sources
- Fog and smoke simulation system
- Special function
- Titrator
- Environmental testing room
- Humidifiers
- Stirrer
- Shaker
- Centrifuge
- Industrial Equipment
- CAN solutions
- Contactless card readers
- Humidity sensor
- Motor
- Gear reducer
- Dehumidifying device
- Air purification equipment
- Drying equipment
- Heating equipment
- Ventilation equipment
- PCAN-USB adapter
- Polynomial vehicle interface
- Guide system
- Fingerprint card
- Products
Gloss measuring equipment
Showing 1–6 of 7 results
Surface check gloss meter PCE-IGM 100-ICA includes ISO certification
Model: PCE-IGM 100
The PCE-IGM 100-ICA Surface Check Gloss Meter is a test device for determining surface gloss. Thus, with a gloss meter, the spectral reflections of the light beam striking the surface to be measured are recorded and analyzed. The measuring device's touch screen allows for easy navigation.
- Geometry: 20° / 60° / 85°
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Standard: ISO 2813 / GB / T 9754 / ASTM D 523/ ASTM D 2457
- Light source: D65
- Wavelength: 400-700 nm
- Includes ISO Calibration Certificate.
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
Paint gloss tester PCE-PGM 100-ICA includes ISO certification
Model: PCE-PGM 100
The PCE-PGM 100-ICA Paint Gloss Tester is a gloss tester that works with 20°, 60° and 85° geometry measurements, using the reflectance principle. This means that the gloss meter emits light that hits the surface to be tested, part of the light will be absorbed by the surface and another part will be reflected from the instrument to analyze and give results. Absolutely reliable.
- Measurement Geometry: 20° / 60° / 85°
- Standard: ISO 2813 / GB / T 9754 / ASTM D 523/ ASTM D 2457
- Range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Includes ISO Calibration Certificate.
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
PCE-GM 100-ICA gloss meter including ISO certification
Model: PCE-GM 100
The PCE-GM 100-ICA gloss meter is used to measure gloss on flat surfaces and works on the principle of a reflectometer. The compact design and ergonomic dimensions of the PCE-GM 100-ICA gloss meter make it useful for on-site measurements or during production plant operations. All test instruments are supplied with calibration and can be ISO certified as an option.
- Measuring angles 20º, 60º and 85º
- Measuring range: 0.0 to 200 gloss units
- Standard: ISO 2813, GB 9754-88, GB 9966.5
- Includes ISO Calibration Certificate.
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
Paper and textiles gloss meter PCE-GM 55-ICA includes ISO certification
Model: PCE-GM 55
Paper and Textiles Gloss Gauge - The PCE-GM 55 Gloss Gauge is a 3-angle luminance instrument. The measuring angles of the gloss meter are 20°, 45° and 75°. This allows the gloss meter to be used for gloss measurement in the high gloss and medium gloss ranges. Special measuring angle of 75° enables gloss level measurement on paper and textiles.
- Range: 0 ... 200 0 ... 200 gloss units / highlights
- Accuracy: ± 1 gloss units
- Repeatability: ± 0.5 gloss units
- Optical Angle: 20°, 45°, 75°
- Measurement for medium and high gloss
- Gloss measurement on fabric and paper can
- Includes ISO Calibration Certificate.
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
Gloss meter PCE-GM 80-ICA includes ISO certificate
Model: PCE-GM 80
Gloss meter PCE-GM 80-ICA - Gloss meter equipped with an external gloss sensor. The gloss meter's very small sensor measuring surface Ø 4.5 mm contributes significantly to the ability to perform measurements on small hard-to-reach surfaces, giving this instrument versatility.
- Measuring geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
- Includes ISO Calibration Certificate.
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
Gloss and opacity meter PCE-RM 100
Model: PCE-RM 100
The PCE-RM 100 gloss and opacity meter is used to measure the reflectivity properties of surfaces in relation to opacity. The PCE-RM 100 gloss meter is used in stained glass, film quality, paper opacity, shine and hidden strength of various paints, inks and coatings - this gauge delivers efficiency and extremely reliable accuracy.
- Measuring range: 0 ... 100 (0 is transparent and 100 is fully opaque)
- Optical measuring angle: 45 degree angle
- Measurement accuracy: ±1
- Resolution: 0.1
- Battery Operation
- Interface and software.
SIGN UP FOR A CONSULTATION
Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.
