Surface roughness tester PCE-RT 2300-ICA/ ISO

Price: Liên hệ

Model PCE-RT 2300
Manufacturer PCE
Power supply
Condition Còn hàng
Warranty 12 tháng

I. Specification of Surface roughness tester PCE-RT 2300-ICA/ ISO

PCE-RT 2300-ICA Surface Profile Tester included. ISO calibration certificate / Portable material tester for quick detection of roughness (Ra, Rz, Rq, Rt and more) / Removable motor parts / Touch screen interface / Range micro 320 μm or 12.6

Surface roughness tester PCE-RT 2300-ICA/ ISO
  • Configuration Gauge - The PCE-RT 2300 Surface Tester is used to measure surface roughness.
  • This PCE-RT 2300 profiler features a removable motorized sensor. This property allows the surface roughness to be determined by the profile even on small or narrow profiles.
  • Measured values ​​are displayed on the configuration's large LCD screen. This monitor is also used by the profiler. Profilometer is powered by an internal battery with voltage. This battery can be powered by a regular USB power adapter.
  • The removable motorized sensor is connected by cable to the main body of the profiler. The diamond pen is installed in the motorized sensor. This press has a maximum force of 4 mN on the surface from which the roughness profile will be measured. Profilometer measurements according to ISO, ANSI and JIS standards are valid for profilometer measuring instruments.

Standard symbols:

  • Rz = average roughness. The mean roughness depth Rz is the arithmetic mean of the maximum individual seam depth of a number of adjacent individual gauge sections.
  • Ra = arithmetic mean roughness. Ra is an internationally recognized and applied roughness parameter. This is the arithmetic mean of the absolute values of the configuration deviations in the reference line. The measured value Ra is always less than the value of Rz determined on the same roughness profile.
  • Rt = maximum roughness. Maximum surface roughness Rt is the distance between the highest point and the lowest point of the measuring part.
  • Rq = Square Mean Roughness. Rq is the root mean square of all coordinate values in the individual measured distance l. Rq corresponds to specified RMS (Root Mean Square).

Configuration meter Surface roughness tester PCE-RT 2300-ICA/ ISO Configuration meter

  • Touch screen interface and bluetooth PC connection
  • Measure all roughness profile values
  • Battery and power operation
  • Various filters can be adjusted
  • Diamond test head
  • Detachable motorized sensor
  • Large measuring range of Rz: 0.02 μm ... 320 μm; Ra, Rq: 0.005 μm ... 32 μm
  • Includes ISO Calibration Certificate.

Surface roughness tester PCE-RT 2300-ICA/ ISO Configuration meter Configuration meter

II. Standard package

Surface roughness tester PCE-RT 2300-ICA/ ISO
  • PCE-RT 2300 Configuration Meter
  • Microprobes
  • Detachable motorized sensor
  • 2 Connection cable for engine unit
  • Charger
  • Interface cable
  • User manual
  • ISO Calibration Certificate.
***See more GMGA roughness gauges at:

III. Specifications of Surface roughness tester PCE-RT 2300-ICA/ ISO

Measuring range

Rz: 0.02 μm ... 320 μm; Ra, Rq: 0.005 μm ... 32 μm

± 10%


± 7%

± 20 μm: 0.01 μm

± 40 μm: 0.02 μm

± 80 μm: 0.04 μm

Measurement Parameters

Ra, Rz, Rq, Rt, Rc, Rp, Rv, R3z, R3y, Rz (JIS), Ry, Rs, Rsk, Rku, Rmax, Rsm, Rmr, RPc, Rk, Rpk, Rvk, Mr1, Mr2
Measurement Standards

ISO4287, ANSI b46.1, DIN4768, JISb601


Primary profile (roughness + waviness)

Roughness profile (roughness)

Loading curves

Measuring filter

RC, PC-RC, Gaus, DP

Measuring section (Cut Off)                                       

0.25 mm, 0.8 mm, 2.5 mm
Measuring length

1 ... 5* measuring path

Max. 17.5 mm (including pre- and post-run)


Diamond probe tip 90°

5 μm

Contact force sensor

<4 mN

Feed rate  

0.25 mm: 0.135 mm / s

0.8 mm: 0.5 mm / s

2.5 mm: 1 mm / s


3.5" LCD screen

Power supply

3.7V Li-Ion Battery

5V / 800-mA USB Power Adapter

Operating time

50 h
Operating conditions

-20 ... 40°C / -4 ... 104°F, max. 90% rh

Storage conditions

-40 ... 60°C / -40 ... 140°F, max. 90% rh

Main unit: 158 x 55 x 52 mm / 6.2 x 2.2 x 2 in

Motor unit: 115 x 23 x 27 mm / 4.5 x 1 x 1.1 in 


About 500 g / 1.1 lbs


IV. Video

  ***Product main path: Roughness Tester PCE-RT 2300-ICA Incl. ISO Calibration Certificate

Review Surface roughness tester PCE-RT 2300-ICA/ ISO

5 0% | 0 review
4 0% | 0 review
3 0% | 0 review
2 0% | 0 review
1 0% | 0 review
Review Surface roughness tester PCE-RT 2300-ICA/ ISO
Choose a image
0 character ( Minimum of 10)

    There are no reviews yet.

    No comments yet


    Please fill in the form below and send your comments and questions to GMGA, we will respond to your email as soon as possible.


      100% new product


      100% refund if the product is of bad quality and not as promised

      24/7 SUPPORT

      Hotline: 0845 969 336