Testing Equipment

Food ATP Test Meter PCE-ATP 1 - An ATP tester or an ATP meter, the photometer is used for surface testing. This food inspection meter enables quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleaning, disinfection and sanitation. The PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation use in a wide variety of applications.

• Measuring range: 0 ... 999,999 relative light units (RLUs)
  
• Store up to 10,000 date and timed data records in internal memory
  
• Allows rapid detection of bacterial residues.

PCE-HT 225E Concrete Hardness Hammer, also known as concrete recovery hammer or Swiss hammer, is used for non-destructive measurement of surface hardness and compressive strength. Suitable for use with concrete, stone and building materials. This concrete hardness tester has a live digital display, voice function, USB data interface and memory to store up to 200 measurement values.

• Test range: 10 ... 60 MPa or 100 ... 600 kg/cm² / 1450.38 ... 8702.26 psi
  
• Impact Energy: 2,207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  
• Stroke : 75 ± 0.3 mm / 2.95 ± 0.012 in
  
• Radius of sphere tip: 25 ± 1 mm / 0.99 ± 0.04 in
  
• Includes data processing software.

PCE-IT 120 Insulation Tester - Safety Tester detects insulation resistance up to max. 8 GΩ (with auxiliary voltages of 250, 500 and 1000V). In addition, this PCE-IT 120 insulation tester provides measurement for DC and AC voltages up to max. 950V DC and 700V AC as well as resistance up to max. 2 kΩ.

• DC test voltage: 250/500 / 1000V
  
• OLED screen - Automatic polarizing screen
  
• Auto range selection - PI and DAR . testing
  
• Degree of protection / standardization: IEC 1010-1, 700V CAT III.

The insulation meter PCE-IT413 (5000V) is one of a series of high-precision resistive devices and features a 6-digit display. These insulation meters have been specially developed for technical service and for difficult measuring conditions.

• Insulation tester for professionals
  
• 6 digit LCD
  
• Measurements according to VDE 0413 part 1
  
• Tension test up to 5,000V.

Insulation Tester - The PCE-IT414 Insulation Safety Tester measures up to 10,000V maximum. PCE-IT414 belongs to a series of high-precision resistive devices with 6-digit display. These insulation meters have been specially developed for technical service and for difficult measuring conditions.

• For professionals
  
• 6 digit LCD
  
• Measurements according to VDE 0413 part 1
  
• Tension test up to 10,000V.

Powerful PCE-ITE 50 insulation tester with large 3.5 inch color LCD display. The PCE-ITE 50 insulation tester offers different measurement modes like insulation resistance, grounding resistance, loop impedance, voltage, low impedance measurement and RCD test with camera function, capability the ability to record images in accordance with the measurements.

• 3.5" TFT LCD display
  
• Loop resistors LN, L-PE and N-PE
  
• Adjustable FI test current
  
• SD Card and Bluetooth
  
• Dual screen
  
• Check FI good/bad
  
• Low Ohm Measurement
  
• Terminal voltage up to 1000V.