ESD electrostatic simulator gun SESD 216 16.5kV

Buyer Rates Mã sản phẩm: 17065

Model: SESD 216
Manufacturer: Schlöder
Status: Stocking
Guarantee: 12 months
Price: Contact

The ESD SESD 216 16.5kV electrostatic simulator gun is suitable for performing EMC tests on systems and systems according to IEC/EN 61000-4-2 (ESD test). Depending on the test object and test setup, two test methods will be used: exhaust and exposure. In the case of gas discharge, pulses are triggered by approaching the test object. When the contact is discharged, the test probe is placed on the test object.

  • ± 16.5 kV air / ± 10 kV contact discharge
  • Discharge impedance 150 pF / 330 ohms
  • Contact control in case of contact discharge
  • Counter operation with and without automatic polarity change.

Description

I. Specification of ESD electrostatic simulator gun SESD 216 16.5kV

ESD electrostatic simulator gun SESD 216 16.5kV

  • The ESD SESD 216 Electrostatic Simulator is suitable for performing EMC tests on systems and systems according to IEC/EN 61000-4-2 (ESD testing).
  • Higher test levels can be set beyond standard limits. Depending on the test object and test setup, two test methods will be used: air discharge (AIR) and contact discharge (CON).
  • Contact control: ESD SESD 216 16.5kV Schlöder electrostatic simulator gun with “contact control”. With the “CON” test method, the test head touches the surface of the test object. If there is no contact, the pulse is not triggered. The display shows “No contact”. This ensures that a true discharge takes place when the contact is discharged.
  • Always ready to use: SESD 216 ESD emulator works with Battery. If the Battery is exhausted, it can be charged immediately with the charger included in the range of distribution without the need to change the Battery. The in-display charging bar indicates the charging status.

ESD electrostatic simulator gun SESD 216 16.5kV

    • 2 test methods applicable: exhaust or contact
    • Higher test levels can be set beyond standard limits.
    • Displays actual discharge voltage during exhausting
    • Automated programming test process
    • Large display with easy-to-read digits
    • Works with Battery and mains.

II. Standard package

ESD electrostatic simulator gun SESD 216 16.5kV Schlöder

  • ESD SESD 216 Generator
  • Charger with connection cable
  • Exhaust probe (SESD 3020)
  • Contact discharge test probe (SESD 3021)
  • Strap (SESD 231)
  • Operating manual.

***See more of GMGA’s ESD electrostatic simulator at: https://gmga.vn/danh-muc/thiet-bi-bao-tri/thiet-bi-mo-phong-tinh-dien-esd/

III. Specifications of ESD electrostatic simulator gun SESD 216 16.5kV

Output voltage

Adjustable via encoder
Operating mode

Air discharge and

 Contact discharge

Air discharge

± 0.2 kV to ± 16.5 kV, 100 V steps

Contact discharge

± 0.2 kV to ± 10.0 kV, 100 V steps
Polarity

Positive and negative

Special function

In counter operation, either polarity changeover after half the set pulses

Repetition rate

Air discharge

Single pulse or repetitive
(Frequency depends on the distance of the discharge electrode / test object)
Contact discharge

Single pulse, 0.1 Hz, 0.2 Hz, 1 Hz, 2 Hz, 5 Hz, 10 Hz, 20 Hz.

Continuous operation

Possible with air discharge and contact discharge

 

Holding time

≥ 5 sec
Preset counter

1 – 9999

Discharge electrodes

According to IEC / EN 61000-4-2
Impact capacity

150 pF ± 10%

Discharge resistance

330 ohm ± 5%
Self-test

In 14 steps, can be activated via interface

Working temperature

0 – 40 ° Celsius
Relative humidity

0 – 60%

Weight approx .

1260 g

 

IV. Video

 

***See more videos of ESD electrostatic gun at: Gmga Measuring Youtube.

Reviews

There are no reviews yet.

Be the first to review “ESD electrostatic simulator gun SESD 216 16.5kV”

Your email address will not be published.