ESD Emulator SESD 30000 30kV

Buyer Rates Mã sản phẩm: 17063

Model: SESD 30000
Manufacturer: Schlöder
Status: Stocking
Guarantee: 12 months
Price: Contact

The ESD SESD 30000 30kV Schlöder simulator is suitable for performing EMC tests according to IEC/EN 61000-4-2, ISO 10605 and others standards. The system’s modular structure allows for more experimentation. Tested according to different standards and customer requirements. Higher test levels can be set far beyond standard limits.

  • Test against different requirements
  • Combined R(Ω) and C(pF)
  • 30 kV air and contact discharge
  • Built-in automatic charging
  • Modular design, can be combined on request
  • Capacitor and resistor module
  • Optional SESD 30 battery for battery and mains operation.

Description

I. Specification of ESD Emulator SESD 30000 30kV

ESD Emulator SESD 30000 30kV

 

  • ESD Simulator – The SESD 30000 Electrostatic Gun is suitable for performing EMC tests on systems and systems according to IEC/EN 61000-4-2, ISO 10605, MIL-STD and other standards. other. The simulation structure of the simulation allows further testing in different ways according to the standard and customer requirements.
  • Modular design:
    • The discharge impedances of the ESD SESD 30000 30kV Schlöder simulator are not permanently integrated in a module – they are built separately and are available from 100 pF to 1000 pF and 0 Ohm to 5000 Ohm. This allows for a wide range of impedance combinations. New impedance requirements can be quickly and inexpensively accomplished by purchasing a module (C and/or R).
  • Automatic power absorber:
    • The built-in function ensures that unintentional electrostatic charges can be extracted automatically. The charge draw to earth always takes place during pulse break through a discharge resistor of approximately 1 MOhm. During the AIR test procedure, the test head of the ESD SESD 30000 electrostatic gun touches the surface of the test object after discharge. The touch point is now connected to earth through about 1 MOhm.
  • Self-test / functional test:
    • This function checks and controls the operating status of the  ESSD SESD 30000 30kV Schlöder simulator (approximately 30 seconds). In 14 test steps, the power supply properties, high voltage parameters, capacitance value and HV discharge are tested at both terminals. This test is more than a reasonableness check, but it does not replace an external calibration.

II. Special features

30kv-Schlöder

  • Power modules available up to 1000 pF
  • Resistive modules from 50 Ohm to > 5 kOhm and special module 0 Ohm (for exhaust only)
  • Electronic polarization module (optional)
  • Approx 0.5 ns faster edge rising discharge module (optional) – more rigorous and aggressive testing possible
  • Through the extended frequency spectrum (e.g. ANSI)
  • Transponder Technology – All modules are equipped with transponders, which are electronically recognized and displayed on the screen. The microprocessor recognizes the device configuration all the time (important for self-testing).
  • Base station with large display with easy to read digits
  • User definable settings such as controlled contact discharge or externally activated with a separate button.
  • Ergonomic handle with large trigger button
  • Large buttons for simple and quick parameter setting
  • FO adapter for serial PC interface, 10 m optical cable plus remote control software (optional)
  • Self-test the ESD generator, which can be activated through the interface or the service menu.

III. Model ESD SESD 30000

  • SESD 30000: ESD generator 30 kV CON / 30 kV AIR, 150 pF / 330 according to IEC / EN 61000-4-2 and suitable for other impedances such as ISO 10605, main operation, mechanical polarization module , incl.IEC / EN 61000-4- 2 Factory calibration traceable to ISO 17025.
  • SESD 30000 P: ESD simulator 30 kV CON / 30 kV AIR, 150 pF / 330 according to IEC / EN 61000-4-2 and suitable for other impedances such as ISO 10605, main operation, electronic polarization module , inc.IEC / EN 61000-4-2 Traceable factory calibration to ISO 17025.
  • SESD 30000 ISO: ESD generator 30 kV CON / 30 kV AIR, 150 pF, 330 pF, 330, 2000 according to IEC / EN 61000-4-2 and conform to other impedances such as ISO 10605, main operation, modular mechanical polarizer, including ISO 10605 Factory Calibration traceable to ISO 17025.
  • SESD 30000 ISO P: ESD simulator 30 kV CON / 30 kV AIR, 150 pF, 330 pF, 330 Ω, 2000 Ω according to IEC / EN 61000-4-2 and suitable for other impedances such as ISO 10605, main operation, electronic polarizer module, ISO 10605 factory calibration traceable to ISO 17025.

sesd-30000-30kv-Schlöder

IV. Standard package of ESD Emulator Schloeder SESD 30000

ESD Emulator SESD 30000 30kV

  • ESD generator with connection cable
  • Base station with power cord
  • Mechanical module for pole change
  • 150 pF . capacitor module
  • Resistor module 330 ohms
  • Air and contact test probes
  • Strap 2 m
  • Operating manual
  • Weight: 6.7 kg.

***See more of Gmga’s ESD emulator at: https://gmga.vn/en/danh-muc/maintenance-equipment/esd-electrostatic-simulator/

V. Specifications of ESD SESD 30000 electrostatic simulation gun

SESD generator 30000

Output voltage

Adjustable via rotary encoder
Operating mode

Air discharge and contact discharge

Air discharge

  1 kV to 30.0 kV in 100 V steps
Contact discharge (with contact control)

1 kV to 30.0 kV in 100 V steps

Polarity

Positive and negative

Repetition rate

Air discharge

Single pulse or repetitive

Contact discharge

Single pulse, 0.1 Hz; 0.2 Hz; 1 Hz; 2 Hz; 5 Hz; 10 Hz; 20 Hz

Continuous operation

Air discharge and contact discharge possible
Preset counter

1 – 9999

Standard impedance

150 pF / 330 Ω (IEC / EN 61000-4-2)
Other impedances

See options / accessories

Test probes

According to IEC / EN 61000-4-2
Weight

Approx. 1500 g

Working temperature

0 – 40 ° Celsius
Relative humidity

0 – 60%

Technical data – base station

Supply voltage

85-264 VAC, 47-63 Hz
Power consumption

<50 VA

Weight

Approx. 1450 g

 

VI. Video

 

***Watch more ESD emulator videos at: Gmga Measuring Youtube.

Reviews

There are no reviews yet.

Be the first to review “ESD Emulator SESD 30000 30kV”

Your email address will not be published.