Handheld electrostatic discharge gun ESD SESD 230 30kV

Buyer Rates Mã sản phẩm: 17064

Model: SESD 230 30kV
Manufacturer: Schlöder
Status: Stocking
Guarantee: 12 months
Price: Contact

The ESD SESD 230 30kV hand-held electrostatic discharge gun is suitable for performing EMC tests on systems and systems according to IEC/EN 61000-4-2 (ESD test). Higher test levels can be set far beyond standard limits. Depending on the test object and test setup, two test methods will be used: air discharge (AIR) and contact discharge (CON).

  • 30 kV air and contact discharge
  • Discharge impedance 150 pF / 330 ohms
  • Contact control in case of contact discharge
  • Counter operation with and without automatic polarization change.

Description

I. Specifications of ESD SESD 230 30kV handheld electrostatic discharge gun

Handheld electrostatic discharge gun ESD SESD 230 30kV

  • The Schloeder SESD 230 30kV Schlöder ESD Simulator is suitable for performing EMC tests on systems and systems according to IEC/EN 61000-4-2 (ESD testing).
  • Higher test levels can be set far beyond standard limits. Depending on the test object and test setup, two test methods will be used: exhaust and exposure. In the case of gas discharge, pulses are triggered by approaching the test object. When the contact is discharged, the test head is placed on the test object.
  • Contact control: ESD SESD 230 30kV Schlöder hand-held electrostatic discharge gun with “contact control”. If there is no contact, the pulse is not activated! The display shows “No contact”. This ensures that a true discharge takes place when the contact is discharged.
  • Always ready to go: ESD SESD 230 emulator works with Battery. If the Battery is dead, it can be charged immediately with the charger included in the range of delivery without needing to change the battery. The in-display charging bar indicates the charging status.

Handheld electrostatic discharge gun ESD SESD 230 30kV

    • 2 test methods applicable: exhaust or contact
    • Predefined standard test levels: Higher test levels can be set far beyond the standard limits
    • Displays actual discharge voltage during exhausting
    • Automated programming test process
    • Large display with easy-to-read digits
    • Battery and power operation.

II. Standard package

Handheld electrostatic discharge gun ESD SESD 230 30kV

  • SESD 230 Generator
  • Charger with connection cable
  • Exhaust probe (SESD 3020)
  • Contact discharge test probe (SESD 3021)
  • Strap (SESD 231)
  • Operating manual.

***You may be interested in the GMGA surge generator and EMC measurement system: https://gmga.vn/en/danh-muc/maintenance-equipment/surge-generators-and-emc-measuring-systems/

III. Specifications of Handheld electrostatic discharge gun ESD SESD 230 30kV

Output voltage

Adjustable via encoder
Operating mode

Air discharge and

 Contact discharge

Air discharge

± 0.2 kV to ± 30 kV, 100 V steps

Contact discharge

± 0.2 kV to ± 30 kV, 100 V steps
Polarity

Positive and negative

Special function

In counter operation, either polarity changeover after half the set pulses

 

Repetition rate

Air discharge

Single pulse or repetitive
(Frequency depends on the distance of the discharge electrode / test object)

Contact discharge

Single pulse, 0.1 Hz, 0.2 Hz, 1 Hz, 2 Hz, 5 Hz, 10 Hz, 20 Hz.
Continuous operation

Possible with air discharge and contact discharge

 

Holding time

≥ 5 sec
Preset counter

1 – 9999

Discharge electrodes

According to IEC / EN 61000-4-2
Impact capacity

150 pF ± 10%

Discharge resistance

330 ohm ± 5%
Self-test

In 14 steps, can be activated via interface

Working temperature

0 – 40 ° Celsius
Relative humidity

0 – 60%

Weight approx .

1470 g

 

IV. Video

 

***More videos about ESD hand held electrostatic discharge guns are available at: Gmga Measuring Youtube.

Reviews

There are no reviews yet.

Be the first to review “Handheld electrostatic discharge gun ESD SESD 230 30kV”

Your email address will not be published.