Surface roughness tester PCE-RT 2000-ICA / ISO

Buyer Rates Mã sản phẩm: 17091

Model: PCE-RT 2000
Manufacturer: PCE
Status: Stocking
Guarantee: 12 months
Price: Contact

Surface Roughness Gauge – Configuration Meter PCE-RT 2000-ICA is used for accurate measurement of surface roughness. The PCE-RT 2000-ICA profile gauge can be used on all surfaces. The roughness measurement results are accurately recorded through the integrated piezotast tip.

  • Measurement: Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc in both Metric (µm) and Imperial (µinch)
  • Ra, Rq, Rc: 0.005 μm…16 μm / 0.197 µinch … 629,921 µinch measuring range
  • Rz, Rt Rp, Rv: 0.020 µm … 200 µm / 0.797 µinch … 7874.016 µinch measuring range
  • RSM: 5 μm …1000 μm / 1968 µinch … 3937 µinch measuring range μinch
  • RSK: -1 …. 1 measuring range
  • Measurement Accuracy: <±10% and Repeatability <6%
  • Powerful piezoelectric sensor
  • Save up to 20 data points
  • 3 different cutting wavelengths
  • Micro USB interface
  • PC software
  • Built-in rechargeable li-ion battery
  • Includes ISO Calibration Certificate.

Description

I. Specification of Surface roughness tester PCE-RT 2000-ICA / ISO

PCE-RT 2000-ICA P roughness meter included ISO calibration certificate / Portable roughness meter for fast roughness detection / Large OLED display / Measure Out, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc / Numeric and graphical display.

Surface roughness tester PCE-RT 2000-ICA / ISO

  • Configuration Gauge – The PCE-RT 2000-ICA Surface Tester is used to accurately measure surface roughness. This roughness meter can be used on all surfaces.
  • The roughness measurement results are accurately recorded through the piezotast tip. Configurable measurements in the ranges Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc and is therefore a universal configuration in quality assurance.
  • Surface roughness meter PCE RT 2000-ICA is placed on the surface for measurement. During the measurement, a probe is pulled over the surface and the configuration displays the measured value on the large OLED screen. In addition to the numerical display of the measured value, the measurement configuration can be displayed graphically.
  • The PCE-RT 2000-ICA configuration meter is powered by a rechargeable battery. Surface tester’s charger is included with delivery. Profilometer has an auto-off function to take care of the battery.
  • Surface roughness meter PCE RT 2000-ICA with Micro USB cable. The measuring device can be charged via this connection. Furthermore, measurement data can be transferred from the configuration to the software. So it is possible to create a complete document of the measurement.

Standard notation:

  • Rz = average roughness. The mean roughness depth Rz is the arithmetic mean of the maximum order depth of a number of adjacent individual gauge sections..
  • Ra = arithmetic mean roughness. Ra is a commonly recognized and internationally applied roughness parameter. This is the arithmetic mean of the absolute values of the configuration deviation in the reference distance. The measured value Ra is always less than the value of Rz determined on the same roughness profile.
  • Rt = maximum roughness. Maximum surface roughness Rt is the distance between the highest point and the lowest point of the measuring part.
  • Rq = average roughness. Rq is the root mean square of all coordinate values in the individual measured distance l. Rq corresponds to specified RMS (Root Mean Square).

II. Advantage

  • OLED screen
  • Measure Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc
  • Numerical and graphical display of measured values
  • Micro USB Cable
  • 3 different cutting wavelengths
  • PC software
  • Statistical function
  • Battery operation
  • Includes ISO Calibration Certificate.

PCE-RT 2000-ICA/ ISO PCE-RT 2000-ICA/ ISO Surface roughness tester PCE-RT 2000-ICA / ISO

III. Standard package

Surface roughness tester PCE-RT 2000-ICA / ISO

1 x Material Surface Roughness Tester PCE-RT 2000-ICA
1 x Microprobe
1 x Protective cap for buttons
1 x Clamping device
1 x Software
1 x Calibration plate
1 x Roughness standard
1 x USB cable
1 x Charging adapter
1 x Transport case
1 x User manual
1 x ISO calibration certificate

***See more GMGA roughness tester at: https://gmga.vn/en/danh-muc/measuring-device/roughness-measuring-equiment/

VI. Specifications of Surface roughness tester PCE-RT 2000-ICA / ISO

Measurement parameters

Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc
Measuring ranges

Ra, Rq, Rc: 0.005 μm … 16 μm

Rz, Rt, Rp, Rv: 0.02 μm … 200 μm

Rsm: 5 μm … 1000 μm

Rsk: -1 … 1

Radius stylus tip

5 μm

Material stylus tip

Diamond, 90° angled
Max. Recommended force for static measurement      

4 mN (0.4 gf)

Measuring principle

Inductive
Radius longitudinal guide bar

45 mm / 1.8 in

Maximum driving distance

15 mm / 0.6 in
Cut-off wavelength (cut off)

0.135 mm / s at cut-off wavelength: 0.25 mm

0.5 mm / s at cut-off wavelength: 0.8 mm

1 mm / s at cut-off wavelength: 2.5 mm

Reversing speed: 1 mm / s

Measurement accuracy

<± 10%

Repeatability

<6%
Display

OLED

Units

μm / μinch (switchable)
Interface

Micro USB

Power supply

Rechargeable Li-ion battery

 

***Video of surface configuration testing equipment is available at: Gmga Measuring Youtube.

Reviews

There are no reviews yet.

Be the first to review “Surface roughness tester PCE-RT 2000-ICA / ISO”

Your email address will not be published.