Thickness gauge A-Scan NOVOTEST UT-2A

I. Specification of ultrasonic thickness gauge NOVOTEST UT-2A

NOVOTEST UT-2A - High measurement accuracy:

• The UT-2A non-invasive thickness gauge has achieved the maximum measurement accuracy from ever produced ultrasonic thickness gauges.
• The A-Scan measurement method does not depend on the strength of the signal which is different from the edge method. Due to the adoption of high-performance computational FPGA chip, NOVOTEST UT-2A enables high resolution of thickness, while maintaining operating speed and signal stability.

NOVOTEST UT-2A - Easy to use interface:

• The NOVOTEST UT-2A ultrasonic thickness gauge is suitable even for inexperienced users using the digital measuring mode, just like in the original devices.
• Digital values of thickness are displayed in large font on the screen and do not need to be adjusted by A-scan. So it is simply and conveniently the same as the classic UT-1M ultrasonic thickness gauge.

Thickness gauge A-Scan NOVOTEST UT-2A has useful operating modes and is convenient to use:

• Control mode. User can set nominal thickness and allowable deviation through nominal value. During testing this NOVOTEST UT-2A ultrasonic thickness gauge will indicate if the measured value deviates above the limit (via lights or sounds). That simplifies testing and reduces the possibility of errors.
• Product profile display mode (B-Scan). On the screen UT-2A will show the product profile by the probe scanning surface. That mode makes it possible for the user to visualize the profile (section) of the inspected object. This mode can be used when it is necessary to present a report with an illustration of the subject's flaws.

NOVOTEST UT-2A - Implement special thickness measurement modes:

• ECHO
• ECHO with regulator port (measurement site)
• ECHO-ECHO (DUAL ECHO) - commonly used when measuring thickness through coatings. This method allows the NOVOTEST UT-2A to measure the thickness of the metal under the coating without polishing.
• PEAK-PEAK - the method is similar to ECHO-ECHO with the difference that the triggering moment is calculated not by crossing zero, but by the maximum level of the signals in the gate.
• The use of a large number of measurement methods allows flexible use of the NOVOTEST UT-2A ultrasonic thickness gauge, depending on the specific job.

• Unlike conventional thickness gauges, which display only one thickness value, the thickness gauge A-Scan NOVOTEST UT-2A allows operational visualization of the signal for subsequent analysis.
• As a rule, the function of A-scan is necessary for professional users but even for beginners, it will be a useful function. Making the viewing at the screen visually display the reflected signals, it can eliminate false triggering, adjust the thickness gauge as precisely and precisely as possible.
• By working with a signal can not only greatly increase the accuracy of thickness measurement and in that case to perform product defect detection, in essence ultrasonic thickness gauge A- Scan NOVOTEST UT-2A can solve the main tasks of an ultrasonic flaw detector.

II. Advantages of the ultrasonic thickness gauge A-Scan NOVOTEST UT-2A

• Multiple gauge thickness
• NOVOTEST UT-2A combines the functions of a thickness gauge and a flaw detector
• Convenient and easy to operate
• Scan mode B, allows users to get product profile like an easy to read picture
• Minimum number of controls
• Select probe type from the archive
• Supersonic speed preset
• High-brightness color screen
• Indicates the presence of sound contact.

III. Specifications of thickness gauge A-Scan NOVOTEST UT-2A

IV. NOVOTEST UT-2A standard kit

• Ultrasonic Thickness Gauge A-Scan NOVOTEST UT-2A
• Probe
• Lemo-Lemo able
• Calibration block
• Cable for PC
• Charger
• Operating manual
• Shipping Box.